Summary of the content on the page No. 1
DES-1008M
Flex-Media Ethernet Switch
User’s Guide
Rev. 01 (October 1998)
6DES1008M.01
Printed In Taiwan
RECYCLABLE
Summary of the content on the page No. 2
Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller zugelassen sind. 5. Das Gerät is vor Feuchtigkeit zu schützen. 6. Bei d
Summary of the content on the page No. 3
Limited Warranty Hardware: D-Link warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the following periods measured from date of purchase from D-Link or its Authorized Reseller: Product Type Warranty Period Complete products One year Spare parts and spare kits 90 days The one-year period of warranty on complete products applies on condition that the product's Registration Card is filled out and returned to a D-Link office within
Summary of the content on the page No. 4
D-Link warrants that its software products will perform in substantial conformance with the applicable product documentation provided by D-Link with such software product, for a period of ninety (90) days from the date of purchase from D-Link or its Authorized Reseller. D-Link warrants the magnetic media, on which D-Link provides its software product, against failure during the same warranty period. This warranty applies to purchased software, and to replacement software provided by D-Link pursu
Summary of the content on the page No. 5
LIMITATION OF WARRANTIES IF THE D-LINK PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT D-LINK'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. D-LINK NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHE
Summary of the content on the page No. 6
Summary of the content on the page No. 7
Trademarks Copyright 1998 D-Link Corporation. Contents subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the Unite
Summary of the content on the page No. 8
Summary of the content on the page No. 9
TABLE OF CONTENTS A G ..............................................................1 BOUT THIS UIDE Terms.....................................................................................................1 Overview of the User’s Guide ................................................................1 PRODUCT OVERVIEW ..........................................................3 UNPACKING AND COMPONENT IDENTIFICATION ......................5 Unpacking ..............................................
Summary of the content on the page No. 10
Network Design Notes..........................................................................17 Node Connections........................................................................................ 17 Cable Limitations ........................................................................................ 18 Making Twisted-Pair Attachments .......................................................19 Making Thin Coaxial Attachments .......................................................20 Makin
Summary of the content on the page No. 11
DES-1008M User’s Guide ABOUT THIS GUIDE This guide discusses how to install the D-Link’s DES-1008M Flex-Media 10/100Mbps Ethernet Switch, work with its panels, and make network connections. Terms For simplicity, this documentation uses the terms “Switch” (first letter upper case) to refer to the DES-1008M Flex-Media Ethernet Switch, and “ switch” (first letter lower case) to refer to all Ethernet switches, including the DES-1008M. Overview of the User’s Guide ♦ Chapter 1, Product Overview. Descr
Summary of the content on the page No. 12
DES-1008M User’s Guide Appendix A, . Lists the technical ♦ Technical Specifications specifications of the Switch. ♦ Appendix B, Cables and Connectors. Provides specifications on cables and connectors. ♦ Appendix C, Slide-in Port Modules. Describes the various slide-in port modules that are supported by the Switch. 2 About this Guide
Summary of the content on the page No. 13
DES-1008M User’s Guide 1 PRODUCT OVERVIEW The Switch is a modularized 10/100Mbps Ethernet switch that offers users the ability to configure the number of network ports and port types, and to meet all media requirements and servers’ high throughput. The Switch provides four expansion slots, each of which supports one slide- in port module with two network ports. Ports can vary from ordinary twisted-pair ports to BNC or fiber-optic ports depending on the installed modules. With these modules, you
Summary of the content on the page No. 14
DES-1008M User’s Guide ♦ Easy Installation Supporting all media types, auto-learning of network configuration, and requiring no configuration setting, the Switch allows workgroups to implement performance enhancement quickly and easily anywhere on the network. ♦ Powerful Performance The Switch supports wire-speed data filtering and forwarding rates, and large per-port MAC address routing table for efficient packet switching. ♦ Comprehensive LED Indicators LED indicators are provided to repo
Summary of the content on the page No. 15
DES-1008M User’s Guide 2 UNPACKING AND COMPONENT IDENTIFICATION This chapter provides unpacking information and description on the various external components of the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: ♦ One Switch ♦ One AC power cord ♦ Four self-adhesive rubber feet ♦ Eight screws and two mounting brackets ♦ One hex screwdriver ♦ This User's Guide Unpacking and Component Identification 5
Summary of the content on the page No. 16
DES-1008M User’s Guide Inspect the Switch and all accompanying items. If any item is damaged or missing, report the problem immediately to your networking equipment dealer. NOTE: The base unit does not include any slide-in port modules. You need to purchase these modules separately from your networking equipment dealer. Identifying External Components This section identifies all the major external components of the Switch. It is divided into three sections with one diagram per section. Each diag
Summary of the content on the page No. 17
DES-1008M User’s Guide Refer to the Indicator Panel section (below) to identify the different status indicators and scales. ♦ Slots 1 to 4 Support the slide-in port modules. Each module provides two switched ports for maximum system configuration of eight switched ports. Depending on the installed modules, port types can vary from ordinary twisted-pair ports to BNC or fiber-optic ports. The base unit does not include any slide-in port modules to provide users the freedom to choose their syst
Summary of the content on the page No. 18
DES-1008M User’s Guide ♦ 100M Indicator This LED lights green when the port is operating at 100Mbps. If the port is operating at 10Mbps, the speed indicator remains dark. ♦ Link/Act Indicator This LED lights green when the port is connected to a powered-on Ethernet/Fast Ethernet station. It blinks off briefly when information is transmitted or received on the port. Please note that when the BNC module is connected, the Link LED is not lit. ♦ FDX/Col Indicator This LED lights green when the
Summary of the content on the page No. 19
DES-1008M User’s Guide Rear Panel AC Power Connector AC LIN E 100-200 VAC I 50-60 H z o 1.0A MAX . USE ONL Y WI TH 2 50 V FUS E Power Switch Fuse System Case Fan ♦ System Fan This fan is used to circulate air inside the Switch and also to dissipate heat. The sides of the system also provide heat vents to serve the same purpose. Do not block these openings, and ensure to leave adequate space at the rear and sides of the Switch for proper ventilation. Be reminded that without proper heat dissipa
Summary of the content on the page No. 20
DES-1008M User’s Guide ♦ Power Switch Turns on and off the Switch. To turn on the system, slide this switch to the “ 1” position; to turn off, slide it to the “ 0” position. 10 Unpacking and Component Identification
