Summary of the content on the page No. 1
Commercial Treadmill Owner’s Manual
C934
COMMERCIAL PRODUCTS DIVISION
Summary of the content on the page No. 2
COMMERCIAL PRODUCTS DIVISION IMPOR IMPOR IMPORT T TANT SAFETY INSTRUCTIONS ANT SAFETY INSTRUCTIONS ANT SAFETY INSTRUCTIONS IMPOR IMPORT TANT SAFETY INSTRUCTIONS ANT SAFETY INSTRUCTIONS When using the C934 treadmill, always follow basic precautions, including the following: To ensure your safety and to protect the unit, read all the instructions before as- sembling and using the treadmill. To ensure the proper use and safety of the treadmill, make sure that all users read this manual. Please
Summary of the content on the page No. 3
COMMERCIAL PRODUCTS DIVISION IMPOR IMPOR IMPORT T TANT SAFETY INSTRUCTIONS ANT SAFETY INSTRUCTIONS ANT SAFETY INSTRUCTIONS IMPOR IMPORT TANT SAFETY INSTRUCTIONS ANT SAFETY INSTRUCTIONS Never step off the treadmill while the running belt is moving. Keep your body and head facing forward. Never attempt to turn around on the treadmill. Never turn ON the treadmill when someone is standing on the machine. Never block the air openings on the hood while operating the treadmill. Keep the air openi
Summary of the content on the page No. 4
COMMERCIAL PRODUCTS DIVISION Table of Contents Important Safety Instructions .........................................2 Safety Approval...................................................................... 3 Grounding Instructions........................................................... 3 Radio Frequency Interference (RFI)....................................... 6 European Applications ........................................................... 6 Obtaining Service ..............................
Summary of the content on the page No. 5
COMMERCIAL PRODUCTS DIVISION Table of Contents Exercising on the Treadmill ...........................................36 Using the Security Clip .......................................................... 36 Using the Handrails ............................................................... 36 Using the Heart Rate “Touch” Capability ................................ 36 Keypad Tips ........................................................................... 37 Workout Tips ..........................
Summary of the content on the page No. 6
COMMERCIAL PRODUCTS DIVISION RADIO FREQUENCY INTERFERENCE (RFI) Federal Communications Commission Part 15 The treadmill has been tested and found to comply with: The IEC EMC Directive (international electromagnetic compatibility certification) The limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. The treadmill generates, uses, and can radiate radio fr
Summary of the content on the page No. 7
COMMERCIAL PRODUCTS DIVISION OBTAINING SERVICE Do not attempt to service the treadmill yourself except for the maintenance tasks described in this manual. The treadmill does not contain any user-serviceable parts. For information about product operation or service, visit the Precor Web Site at www.precor.com or contact an authorized Precor Commercial Products Customer Support Representative at 1-888-665-4404. To help customer support personnel expedite your call, have your serial number availabl
Summary of the content on the page No. 8
COMMERCIAL PRODUCTS DIVISION Notes: page 8
Summary of the content on the page No. 9
COMMERCIAL PRODUCTS DIVISION Unpacking the Treadmill Thank you for purchasing the Precor C934 treadmill. Built to the exacting stan- dards of the health club environment, the treadmill is intended for commercial use and can withstand the rigors of daily club use with little maintenance. Important: Before using the treadmill, we urge you to familiarize yourself and your staff with the entire Owner’s Manual. Understanding this manual will help you and your customers use the treadmill safely and su
Summary of the content on the page No. 10
COMMERCIAL PRODUCTS DIVISION HARDWARE KIT After unpacking the treadmill, open the hardware kit (refer to Diagram 2) and make sure that you have the following items: ❑ (A) four 2-inch long socket head screws — mount upright supports to base ❑ (B) four barrel spacers — place on 2-inch screws ❑ (C) ten ¾-inch long socket head screws ❑ (D) sixteen flat washers ❑ (E) two 1½-inch socket head screws — handrail clamp assembly ❑ (F) four large diameter washers — place on handrail end cap screws ❑ (G) fou
Summary of the content on the page No. 11
COMMERCIAL PRODUCTS DIVISION Setting Up the Treadmill You do not need any special knowledge or experience to set up the treadmill. However, because of the size and weight of the treadmill, you will need to obtain assistance. INSTALLATION REQUIREMENTS Follow these installation requirements when installing the treadmill. If you do not install the treadmill according to the following guidelines, you could void the Precor limited warranty. Set up the treadmill on a solid, flat surface. Unpack and
Summary of the content on the page No. 12
COMMERCIAL PRODUCTS DIVISION Diagram 3 Lift the rear of the unit and roll it to its assembly location. Rear cover of unit Lift the unit by placing hands on opposite sides of the rear cross brace found under treadmill’s running belt. 3. Move the treadmill. Diagram 3. To properly lift the rear end and roll it on its front wheels, review Diagram 3. To avoid injury to yourself or damage to the unit, ask for help in placing the treadmill where you plan to use it. Diagram 4 Remove the shipping fasten
Summary of the content on the page No. 13
COMMERCIAL PRODUCTS DIVISION Diagram 5 Route the cable. Display cable Right side mounting bracket Route cable through hole. Right side upright support 6. Route the display cable. Diagram 5. Unwrap the cable and remove any kinks. Have an assistant hold the right upright support close to the base while you route the cable through it. Note: Attaching a string to the cable with a washer tied to the opposite end of the string may help you route the cable through the upright support. Diagram 6 Attach
Summary of the content on the page No. 14
COMMERCIAL PRODUCTS DIVISION 8. Attach the left side upright support to the base assembly. Refer to Diagram 6. Align the upright support with the base assembly mounting bracket and secure it by following steps 7a and 7b. Diagram 7 Install the display console. Display console Display console mounting brackets Upright support 9. Secure the display console to the upright supports. Diagram 7. a. Make sure that the cable is routed through the top of the upright support. Have an assistant hold onto th
Summary of the content on the page No. 15
COMMERCIAL PRODUCTS DIVISION Diagram 9 Raise the incline. Side rail Incline lift TM QUICKSTART key Important: With the handrails attached, the width of the treadmill is 33½ inches (85 cm). It will not fit through a standard 32-inch doorway. 10. Prepare the unit for handrail installation. Diagram 9. For an easier installation, raise the incline to its maximum height by taking the following steps: a. Plug the treadmill into a power outlet and turn the unit ON. b. Stand to the side of the treadmill
Summary of the content on the page No. 16
COMMERCIAL PRODUCTS DIVISION Secure the handrails. Diagram 11 2 ¾-inch screw (C) with washer (F) Side bracket Handrail clamp Slide handrail into position. 1 Lower portion of handrail 3 ¾-inch screws (C) with washers (D) 12. Attach handrails to the side and base brackets. Diagram 11. Important: Attach one handrail at a time. Take the following steps on one side of the treadmill and then, attach the opposite handrail. a. Slide the end of the handrail toward the handrail clamp. Ask your assistant t
Summary of the content on the page No. 17
COMMERCIAL PRODUCTS DIVISION Diagram 12 Connect the 1 heart rate cables. Display console Left handrail Heart rate cable connections (male connector, female receptacle and vice versa for the opposite cable) 2 Security clip 13. Connect the heart rate cables. Diagram 12. Cables protrude from the ends of both handrails and connect the metal strips on the handrails to the receiver inside the display. Once the cables are properly connected, a user’s heart rate appears when the user grasps both touch-s
Summary of the content on the page No. 18
COMMERCIAL PRODUCTS DIVISION c. Place your left hand on the left handrail’s heart rate grip and place your right hand on the right handrail grip. The letters “Hr” begin to blink in the upper right display indicating that a signal is being transmitted. Within about 15 seconds a heart rate appears. Note: If the blinking “Hr” does not appear, turn the unit OFF. Recheck the cable connections and ask someone else to try the test (steps a through c). d. When the test is satisfactorily completed, turn
Summary of the content on the page No. 19
COMMERCIAL PRODUCTS DIVISION Diagram 15 Secure the fasteners. Second: Alternately tighten four side 2 upright screws. First: Alternately tighten four front panel screws. 3 Third: Alternately tighten the four screws that secure the 1 console to the uprights. 17. Tighten all mounting screws with the hex key (H) provided. Diagram 15. Start at the front of the treadmill with the four screws that attach the upright supports to the front panel. See Diagram 15, #1. Tightening these screws first helps p
Summary of the content on the page No. 20
COMMERCIAL PRODUCTS DIVISION Diagram 17 Level the unit. 1 2 19. Lower the treadmill incline. Make the treadmill’s running bed level by returning the incline to zero. To do this, you need to take the following steps: a. Turn the unit ON. b. Stand to the side of the unit and press QUICKSTART. After a few seconds, the running belt begins moving. c. When the lift stops moving, press the red Stop button and turn the power switch OFF. 20. Level the unit. Diagram 17. The C934 has adjustable rear feet.
