Havis-Shields 1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS C-TM-CV
1995-2007 FORD CROWN VICTORIA TRAK-MOUNT KIT

TOOLS REQUIRED:
Ratcheting Wrench Standard Socket Set
Metric Socket Set Tape Measure

HARDWARE:
QTY DESCRIPTION PART#
10 ¼” x ¾” Hex head bolt GSM33001
6 ¼” Serrated nut GSM30023
4 ¼” Flat washer GSM31005
4 ¼” Split lock washer GSM31026

SUB ASSEMBLY:
1. MOUNT TRAK TO HUMP BRACKETS.
• Determine location that Trak will land on transmission hump for the specific
application.
• With Trak in necessa

ملخص المحتوى في الصفحة رقم 2

• Attach trak to rear hump bracket using (2) ¼-20 x ¾” Hex head bolts and serrated nuts. Note: There is a driver and passenger side bracket to the Rear Hump Bracket. Top of brackets will be parallel to the transmission hump. INSTALLATION: 1. REMOVE SEATS: • Remove rear seat base nuts (18mm). • Slide seat to rear most position. • Remove front seat base bolts (13mm). • Seats do not have to come out of vehicle, they will just need to be tilted out of way to place Trak-Mount asse