Dakota Digital LED Tail Lights for 1969 Mustang LAT-NR372 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS
LAT-NR372
LED Tail Lights for 1969 Mustang

MAN#650206

Kit Includes:

Installation: 69 Mustang

1. Remove light bulb socket from the back of the tail light housing.
2. Remove the light bulb from socket.
3. Remove tail light housing from vehicle.
4. Pull the tail light/body seal off the housing carefully working it around the trim ring and over the
lens.

5. Remove the 6 screws that hold the lens and lens trim.
6. Remove the lens and trim from the

ملخص المحتوى في الصفحة رقم 2

9. Push the bulb base plug and wire from the LED assembly through the light bulb hole in the back of the tail light housing. 10. While working the wire harness through the light bulb opening, place the LED assembly into the housing. 11. Check that all six holes in the LED assembly line up with the six mounting holes for the lens. If they do not, remove the LED assembly, turn it ½ turn, and put assembly back into housing. 12. Place the lens seal over the LED assembly, making sure the