Dakota Digital LED Tail Lights LAT-NR362 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS
LAT-NR362
LED Tail Lights for 1967-1968 Mustang

MAN#650205

Kit Includes:

Installation:

1. Remove light bulb socket from the back of the tail light housing.
2. Remove the light bulb from socket.
3. Remove 6 nuts from the trim studs that secure the tail light housing.
4. Pull the trim pieces out of tail light housing from the rear of vehicle.
5. Remove tail light housing from vehicle.
6. Pull the body seal out of the tail light housing up over the le

ملخص المحتوى في الصفحة رقم 2

11. Push the bulb base plug and wire from the LED assembly through the light bulb hole in the back of the tail light housing. 12. While working the wire harness through the light bulb opening, place the LED assembly into the housing. The mounting plate is marked with up arrows that should point to the top of the tail light housing when the LED assembly is installed correctly. 13. Place the lens seal over the LED assembly, making sure the holes in the seal line up with the holes in the