Addonics Technologies CRTM4HES دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ADDONICS TECHNOLOGIES
Model: CRTM4HES


II. Connecting the power cable and Cipher Tower to the
IMPORTANT
computer
There is no back door for the Cipher tower encrypted hard

drives if the Cipher keys are lost or stolen.
a. Connect the power cord provided from the wall outlet to the

back of the Cipher Tower.
Cipher key
b. A power switch is located on the front of the tower. Make
Check to make sure you have the
sure the power is off on the switch (power LED light should
correc

ملخص المحتوى في الصفحة رقم 2

ADDONICS TECHNOLOGIES Model: CRTM4HES III. Initial RAID setup of the Cipher tower: VI. Verify RAID Setting on the Cipher tower Note: Disconnect the Cipher tower from computer when verifying a. Insert the AES 256-bit cipher key into cipher keyhole located the RAID setting. at the back of the Cipher tower. b. Set the Rotary switch to the RAID configuration required. It is assumed that you have already connected the SATA drives c. Push the RAID Setting button with a ballpoint pen ti