Addonics Technologies RUBY CIPHER AES 256-BIT MOBILE RACK RCMR256I دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Enclosure and Drive Cradle Overview



The drive enclosure is the enclosure where a SATA hard drive is mounted and

secured by 4 screws.



Drive cradle, also known as fixed tray, is the frame that mounts inside the drive

bay of a desktop, server or any computing equipment. The drive cradle provides
both power and data connection between the computer and the drive enclosure.

The Ruby cipher mobile rack fits into any standard 3 1/4” drive bay and can
Addonics
connect to the

ملخص المحتوى في الصفحة رقم 2

top cover IMPORTANT There is no back door for the Ruby Cipher encrypted hard drive if the key is lost or stolen. To ensure there is a spare key, your Ruby Cipher bundled kit comes with one pair of Ruby Cipher keys. These 2 keys have identical encryption code. One of these keys should be kept in a safe and secure location and can be sent back to Addonics for duplicating additional keys. If you are down to the last key, be sure shock to make a back up of all the data store

ملخص المحتوى في الصفحة رقم 3

Step 5 Mount the board to the bottom cover. Step 2: Connect a 4-pin floppy power cable from your system’s power supply to the 4-pin floppy power connector on the IDE bridge attached at the back of the Ruby Cipher drive cradle. This power connection provides power to the ruby cipher mobile rack. Step 3: Slide the Ruby enclosure inside the cradle. Insert the Cipher key. To turn ON the drive enclosure, place switch on INT position. Observe that the green LED on the front of the

ملخص المحتوى في الصفحة رقم 4

Step 3: Slide the Ruby enclosure inside the cradle. Insert the Cipher key. To turn ON the drive enclosure, place switch on INT position. Observe that the green LED on the front of the enclosure lights up. Note: If the LED on the front of the Ruby Cipher enclosure lights up as red color, turn of the system and reseat the cipher key. The LED must turn on as green color indicating it is setup correctly. Be sure the Ruby cipher key is inserted into the drive enclosure prio