ملخص المحتوى في الصفحة رقم 1
BiPAC 7300VP/ 7300VGP
VoIP/(802.11g) ADSL2+ Router
Quick Start Guide
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Billion BiPAC 7300VGP Series ADSL2+ Router For more detailed instructions on configuring and using the VoIP/802.11g ADSL2+ Router, please refer to the on-line manual. Package Contents VoIP/(802.11g) ADSL2+ Router CD-ROM containing the on-line manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable AC-DC power adapter (12VDC, 1.2A) This Quick Start Guide Do not use the BiPAC 7300VGP Series in high humidity or high
ملخص المحتوى في الصفحة رقم 4
Quick Start Guide The Front LEDs LED Description 1 PWR : Lights when the power is ON. 2 SYS : Lights when the system is ready. Steady glow when connected to an Ethernet device. LAN Port 3-6 Glows green for 100Mbps; Orange for 10Mbps. 1-4 : Blinking light when data is Transmitted / Received. WLAN : Lit green when the wireless connection is established. 7 (7300VGP Flashes when sending/receiving data. only) 8-9 Phone : Lit green when the phone is off-hook. Lit
ملخص المحتوى في الصفحة رقم 5
Billion BiPAC 7300VGP Series ADSL2+ Router The Rear Ports 8 7 6 5 4 2 1 3 Port Description Power 1 Power ON/OFF switch. Switch 2 PWR Connect the supplied power adapter to this jack. After the router is powered on, press this recessed button using the end of paper clip or other small pointed object to reset the router or to restore it to factory default settings. 3 RESET 1. Recovery procedures for non-working routers (e.g. af
ملخص المحتوى في الصفحة رقم 6
Quick Start Guide Connecting BiPAC 7300VGP series 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit. 4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set. 5. Connect an RJ11 cable to LINE port when connecting to the telephone wall jack 4
ملخص المحتوى في الصفحة رقم 7
Billion BiPAC 7300VGP Series ADSL2+ Router Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically
ملخص المحتوى في الصفحة رقم 8
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
ملخص المحتوى في الصفحة رقم 9
Billion BiPAC 7300VGP Series ADSL2+ Router Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button an
ملخص المحتوى في الصفحة رقم 10
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. 8
ملخص المحتوى في الصفحة رقم 11
Billion BiPAC 7300VGP Series ADSL2+ Router Configuring Your (802.11g)/VoIP ADSL2+ Router 1. To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed 2. You may configure the router for Internet access in two ways: Easy Sign On (EZSO) Web Configurator Easy Sign On: User just installs all of cables and uses the browser to surf Internet. At this time, the EZSO WEB GUI will be popped up and reques
ملخص المحتوى في الصفحة رقم 12
Quick Start Guide Web Configuator: 1. Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter. 2. A username and password window will appear. The default username and password are admin and admin. Press OK to proceed. 3. You will get a status report on web page. 10
ملخص المحتوى في الصفحة رقم 13
Billion BiPAC 7300VGP Series ADSL2+ Router Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK. A command prompt window will pop out. If your ping is successful which means your local network is able to reach to the device, then the command prompt window will close up automatically. Con