ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
CONTENTS Step 1: Unpacking .................................................. 1 Selecting a Location ......................................... 2 Step 2: Understanding Your Printer ........................... 3 Front View ...................................................... 3 Rear View ....................................................... 3 Understanding the Control Panel ....................... 4 Step 3: Installing the Toner Cartridge ........................ 5 Step 4: Loading Paper ...
ملخص المحتوى في الصفحة رقم 3
English Step 1: Unpacking 1 Remove the Printer and all accessories from the packing carton. Make sure that the printer has been packed with the following items: Toner Cartridge Power Cord USB Cable CD-ROM Setup Guide Notes: • If any items are missing or damaged, notify your dealer immediately. • Components may differ from one country to another. • The CD-ROM contains the printer driver, the User’s Guide, and the Adobe Acrobat Reader program. 2 Carefully remove all of packing
ملخص المحتوى في الصفحة رقم 4
Selecting a Location Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and tray. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. See the image below for clearance space. Do not place the printer close to the edge of your desk or table! Clearance Space •Front: 482.6 mm (enough space so that tray can be removed) •Back: 100 mm (enough space to allow opening of the re
ملخص المحتوى في الصفحة رقم 5
English Step 2: Understanding Your Printer Front View Top output tray (Face down) Output Support Control Panel Front Cover Toner cartridge Power switch Manual Feeder guide Tray Paper level indicator Manual Feeder Rear View Rear output tray (Face up) USB port Power receptacle Parallel port 3
ملخص المحتوى في الصفحة رقم 6
Understanding the Control Panel Button and LEDs Button or LED Description • If the LED lights green, the printer is ready to print. • If the LED lights red, the printer is experiencing an error, such as jammed paper, the open cover or the empty toner cartridge. For detailed information, refer to the User’s Guide of the printer. • In Manual Feed mode, if there is no paper in the Manual Feeder this LED blinks red. • If you press the button while the printer is receiving data, thi
ملخص المحتوى في الصفحة رقم 7
English Step 3: Installing the Toner Cartridge 1 Grasp the front cover and pull it toward you to open. Note: Because the printer is very light, it may be moved when you use it; for example, when opening/closing the tray or installing/ removing the toner cartridge. Be careful not to move the printer. 2 Remove the toner cartridge from its bag and remove the paper covering the cartridge. 3 Gently shake the cartridge from side to side to distribute the toner evenly inside the ca
ملخص المحتوى في الصفحة رقم 8
4 Locate the cartridge slots inside the printer, one on each side. 5 Grasp the handle and insert the cartridge in the printer until it snaps into place. 6 Close the front cover. Make sure that the cover is securely closed. If the cover is not firmly closed, printing errors may occur when you print. Note: When printing text at 5% coverage, you can expect a toner cartridge life of approximately 3,000 pages. 6
ملخص المحتوى في الصفحة رقم 9
English Step 4: Loading Paper You can load approximately 250 sheets of paper in the tray. 1 Pull the tray out of the printer. Note: Because the printer is very light, it may be moved when you use it; for example, when opening/closing the tray or installing/ removing the toner cartridge. Be careful not to move the printer. 2 Push down the pressure plate until it locks in position. 3 Prepare a stack of paper for loading by flexing or fanning them back and forth. Straighten the edg
ملخص المحتوى في الصفحة رقم 10
4 Load paper with the print side facing down. Make sure that all four corners are flat in the tray. 5 Pay attention to the paper limit mark on the left inside wall of the tray. Paper overloading may cause paper jams. Note: If you want to change the paper size in the tray, refer to User’s Guide. 6 Slide the tray back into the printer. 8
ملخص المحتوى في الصفحة رقم 11
English Step 5: Connecting a Printer Cable To print from your computer, you need to connect your printer to your computer with either a parallel interface cable or a Universal Serial Bus (USB) cable. Using a Parallel Cable Note: To connect the printer to the parallel port of the computer requires a certified parallel cable. You will need to buy a IEEE1284 compliant cable. 1 Make sure that both the printer and the computer are turned off. 2 Plug the parallel printer cable in
ملخص المحتوى في الصفحة رقم 12
Using a USB Cable Note: Connecting the printer to the USB port of the computer requires a certified USB cable. 1 Make sure that both the printer and the computer are turned off. 2 Plug the USB printer cable into the connector on the back of the printer. To the USB port on your computer 3 Connect the other end of the cable to the USB port on your computer. See your computer User’s Guide if you need help. Notes: • For using a USB cable, you must be running Windows 98/Me/ 200
ملخص المحتوى في الصفحة رقم 13
English Step 6: Turning the Printer on 1 Plug the power cord into the power receptacle on the back of the printer. 2 Plug the other end into a properly grounded AC outlet, and turn on the power. To the AC outlet Step 7: Printing a Demo Page Print a demo page or a configuration sheet to make sure that the printer is operating correctly. 1 Hold down the button for about 2 seconds to print a demo page. OR Hold down the button for about 6 seconds to print a configuration sheet.
ملخص المحتوى في الصفحة رقم 14
0 3 1 3 r e s a Step 8: Installing Printer software in Windows System Requirements Verify the following: • At least 32 MB (Windows 9x/Me), 64 MB (Windows 2000/NT), 128 MB (Windows XP) or more of RAM is installed on your PC. • There is at least 200 MB of free disk space on your PC. • All applications are closed on your PC before beginning installation. • Windows 95, Windows 98, Windows Me, Windows NT 4.0, Windows 2000 or Windows XP. • At least Internet Explorer 5.0. Installing Printer Softw
ملخص المحتوى في الصفحة رقم 15
English Installing the USB Driver in Windows 98/Me If you want to print using the USB interface in the Windows 98/ Me, you must first install the USB driver to add the USB port. To install the USB driver: 1 Connect the printer to your computer using the USB cable and turn them on. For detailed information, see page 10. 2 The Add New Hardware Wizard window appears. Click Next. 3 Place the CD-ROM in the CD-ROM drive and check Search for the best driver for your device and click Next. 4 Che
ملخص المحتوى في الصفحة رقم 16
Step 9: Viewing the User’s Guide The Xerox Phaser 3130 User’s Guide, which is in the software CD-ROM, is in Adobe Acrobat PDF format. The manual will give you flexibility and convenience when you have to access information. You can view the manuals on-screen in different formats (viewing a single page, continuous single page or continuous facing page, zooming in up to 1600% and out up to 12.5%, scrolling two-up page or article flow). You can also print the manual, if necessary. In Window
ملخص المحتوى في الصفحة رقم 17
English Note: If your ghostscript version is old, you may not see the pdf file. Then, install Acrobat Reader on your system, or try to read the User’s Guide on Windows system. Installing the Adobe Acrobat Reader 1 Click the icon at the bottom of the screen. In the terminal screen appears, type in: [root@local /root]# cd /mnt/cdrom (the CD-ROM directory) [root@local cdrom]# manual/acrobat4/INSTALL 2 After reading the license agreement, type accept . 3 When you are asked of installation dire
ملخص المحتوى في الصفحة رقم 18
NOTE 16
