ملخص المحتوى في الصفحة رقم 1
VR182
MOBILE AUDIO SYSTEM
Installation and Operation Manual
ملخص المحتوى في الصفحة رقم 2
VR182 SAFETY INFORMATION When Driving Keep the volume level Iow enough to be aware of the road and traffic conditions. Protect from Water Do not expose the product to water, as this can cause electrical shorts, fire or other damage. Protect from High Temperatures Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback. Do not mount radio within close proximity of engine c
ملخص المحتوى في الصفحة رقم 3
VR182 DISC NOTES Depending on the recording status, conditions of the disc, and the equipment used for recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please NOTE: A disc may become scratched (although not enough to make it unusable) depending on how you handle it and other conditions in the usage environment. These adhere to the following recommendations: scratches are not an indication of a problem with the player. • Use CD-RWs with speed 1x to 4x and wri
ملخص المحتوى في الصفحة رقم 4
VR182 INSTALLATION Before You Begin 1. Disconnect Battery Before you begin, always disconnect the battery negative terminal. 2. Remove Transport Screws and discard. MOUNTING SLEEVE Important Notes • Before final installation, test the wiring connections to make sure the unit is connected REMOVAL KEY properly and the system works. • Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. • Consult with your nearest dealer if
ملخص المحتوى في الصفحة رقم 5
VR182 Ford Vehicle Mount 1. Remove the mounting sleeve (see step 1 of “DIN Front Mount” on page 4). The mounting sleeve is not used in this application. 2. Use the supplied mounting screw and the rear installation bracket to secure the unit in place. REMOVAL KEYS REAR INSTALLATION BRACKET MOUNTING SCREW 3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. 4. Follow the wiring diagram carefully and make certain all connections are secu
ملخص المحتوى في الصفحة رقم 6
VR182 WIRING SIRIUSConnector CD Changer Connector Antenna Connection Power Antenna Connect to power antenna or amplifier. If not used, (BLUE WIRE) tape bare end of wire. RED A (YELLOW WIRE) Aux-In RCA Connections WHITE (RED WIRE) A 0.5A FUSE (YELLOW WIRE) RED 15A FUSE (GRAY WIRE) Aux-Out RCA A-A Connections WHITE Chassis Ground (BLACK WIRE) Connect to ground terminal or clean unpainted metal part of chassis. IR Remote Connector (WHITE WIRE) iPOD Connector +12V Battery/Constant Connect to battery
ملخص المحتوى في الصفحة رقم 7
VR182 BASIC OPERATION 2. Rotate the VOLUME control (1) within 5 seconds to adjust the hours. 3. Press the DISP button again and the minutes will flash. 4. Rotate the VOLUME control within 5 seconds to adjust the minutes. 5. Press DISP again to exit time set mode. After 5 seconds, time set mode will exit automatically. NOTE: If the time mode is set to “12 HOUR” in the setup menu, continue turning the VOLUME control to change between AM (A) and PM (P). NOTE: If “P-CLOCK ON” is selected in the
ملخص المحتوى في الصفحة رقم 8
VR182 System Menu 1. Press and hold the MENU/AUDIO button (3) for more than 3 seconds to enter the system menu. 2. Rotate the VOLUME control (1) to highlight the desired item. 3. Press the VOLUME button (1) to select the highlighted item. 4. Rotate the VOLUME control to select a value. 5. Press the VOLUME button to return to menu selection mode. The following feature functions can be adjusted: • BEEP (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons are selected). • P-VOLU
ملخص المحتوى في الصفحة رقم 9
VR182 TUNER OPERATION replace any stations already stored in that band. After stations have been stored, the radio will enter Preset Scan and preview each stored station. Preset Scan Select a band (if needed). Press AS/PS (15) to scan stations stored in the current band. The unit will pause for ten seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached. Weather Band Selection In any mode, press the WB button (17) to access the weather band (NOAA
ملخص المحتوى في الصفحة رقم 10
VR182 CD/MP3/WMA OPERATION Repeat Play Press the RPT button (5) during disc play to repeat play the current track. Press RPT again to stop repeat play Random Play Press the SHUF button (7) on the control panel during disc play to play all tracks on a CD in random, shuffled order. “SHUFFLE” will display in the upper right corner. Press SHUF again to stop random play. Selecting MP3/WMA Tracks The AS/PS button (15) functions as the Digital Audio Mode selection button during MP3/WMA operation.
ملخص المحتوى في الصفحة رقم 11
VR182 SIRIUS RADIO OPERATION tune to that channel. While viewing a category list, press the DISP button to change display information between Channel Name, Artist, or Song Title. Storing Preset Channels The preset buttons (27) can be used to store 6 channels per band (SIR1, SIR2 and SIR3), allowing convenient access to your favorite channels. Programming Channels 1. Select the channel you want to store in memory. 2. Press and hold a preset button (27) until the corresponding preset button num
ملخص المحتوى في الصفحة رقم 12
VR182 IPOD OPERATION Random Play During playback, press the SHUF button (7) to play all songs in the current category in random order. Random play will begin once the current song has finished playing. “Shuffle” will appear on the LCD. Press SHUF again to stop random playback. Selecting Tracks During playback, press the SEEK < / > button (20/19) to play the previous or next track in the current category. Press the SEEK < button (20) once to play the song from the start position or press SEEK
ملخص المحتوى في الصفحة رقم 13
VR182 CD CHANGER OPERATION After an optional CD changer has been installed and properly connected, press the reset button (11) to initialize the installation. Refer to the owner’s manual included with the CD changer for instructions on installing, loading and using the CD magazine. Switching to CDC Mode Press the MODE button (4) until “CDC” appears on the LCD display. Playback begins with the first CD that the CD changer detects. Controlling Disc Playback Pausing Playback Press the >/|| butt
ملخص المحتوى في الصفحة رقم 14
VR182 REMOTE CONTROLLERS Inserting the Battery Steering Wheel Remote (SOLD SEPARATELY) 1. To open the battery compartment cover, push the cover marked “OPEN” on the back of Installing the Steering Wheel Remote the remote control. Use the mounting bracket to attach the remote control to the steering wheel: 2. Insert the new battery (CR2025 3V) into the battery compartment. Make sure the positive 1. Use the screwdriver to remove the two screws on the bottom of the mounting cabinet and and negat
ملخص المحتوى في الصفحة رقم 15
VR182 Credit Card Remote (SOLD SEPARATELY) CARE AND MAINTENANCE • Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain • POWER: Powers on/off. minerals that can corrode the electronic circuits. • MOD: Cycles through all available play POWER VOL MENU • Keep the product away from dust and dirt, which can cause premature wear of parts. modes (Radio, CDP, CDC, SAT, iPod, Aux). MOD AUD • Handle the product gently and carefully. Dropping it can damage circuit bo
ملخص المحتوى في الصفحة رقم 16
VR182 TROUBLESHOOTING SPECIFICATIONS CD Symptom Cause Solution Signal to Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 60dB Channel Separation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .: More than 50 dB No power The vehicle’s ignition is not If the power supply is properly Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .: 40Hz - 18
