American Telecom SL PTG012 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

AMERI*CAN TELECOM INC.
Technical Document



SL PTG012 Telephone and Charging
Station
Installation Instructions


The Ameri*Can Telecom Inc. SL PTG012
Phone and Charging Station is a wall
mount or desktop enclosure designed for
SpectraLink pocket phones and battery
changers. It includes a hinged dust cover

with a key lock and holds up to 12
SpectraLink Phones and 12 battery
chargers. SL PTG012



Inventory

Verify that all items listed on the Ameri*Can packin

ملخص المحتوى في الصفحة رقم 2

AMERI*CAN TELECOM INC. Technical Document Charger Installation The SL PTG012 SpectraLink Phone and Charging station is shipped with its power supply and charger regulator boards installed, and with their distribution jacks routed and configured, as illustrated here: SL PTG012, Rear View At the front of the unit: 1. Lift open the front door of the enclosure. 2. Locate the pre-drilled hole-pairs, and identify the pairs that will be used to mount the individual battery

ملخص المحتوى في الصفحة رقم 3

AMERI*CAN TELECOM INC. Technical Document 3. Attach each PTQ365 charger to the housing using two (2) nylon spacers (p/n 180100-00) under the charger, and two (2) #6-19 screws (p/n 180012-00) per charger. PTQ365 4. Plug a power supply jack into each charger. 5. Plug in the AC power cord to turn power on. Verify that each charger LED is lit solid red. 6. Place a SPECTRALINK battery into each charger position. Verify that each

ملخص المحتوى في الصفحة رقم 4

AMERI*CAN TELECOM INC. Technical Document 2. Position the enclosure on the wall in the location it will be mounted. Ensure that it’s at the appropriate height, and level; mark the position of the four mounting holes, forming a rectangle 26” by 4 3/8”. Refer to the illustration below. Note: If the wall is wallpapered, use a razor to cut the area around the mark before drilling. 3. Use a 1/8” bit to drill the pilot holes for the wall anchors to mount the enclosure. 4. Insert the anc

ملخص المحتوى في الصفحة رقم 5

AMERI*CAN TELECOM INC. Technical Document SL PTG012 Installation Instructions Page 5