Our goal is to provide you with a quick access to the content of the user manual for American Telecom SL PTG012. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with American Telecom SL PTG012.
If looking through the American Telecom SL PTG012 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual American Telecom SL PTG012 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to American Telecom SL PTG012. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
AMERI*CAN TELECOM INC.
SL PTG012 Telephone and Charging
The Ameri*Can Telecom Inc. SL PTG012
Phone and Charging Station is a wall
mount or desktop enclosure designed for
SpectraLink pocket phones and battery
changers. It includes a hinged dust cover
with a key lock and holds up to 12
SpectraLink Phones and 12 battery
chargers. SL PTG012
Verify that all items listed on the Ameri*Can packin
AMERI*CAN TELECOM INC. Technical Document Charger Installation The SL PTG012 SpectraLink Phone and Charging station is shipped with its power supply and charger regulator boards installed, and with their distribution jacks routed and configured, as illustrated here: SL PTG012, Rear View At the front of the unit: 1. Lift open the front door of the enclosure. 2. Locate the pre-drilled hole-pairs, and identify the pairs that will be used to mount the individual battery
AMERI*CAN TELECOM INC. Technical Document 3. Attach each PTQ365 charger to the housing using two (2) nylon spacers (p/n 180100-00) under the charger, and two (2) #6-19 screws (p/n 180012-00) per charger. PTQ365 4. Plug a power supply jack into each charger. 5. Plug in the AC power cord to turn power on. Verify that each charger LED is lit solid red. 6. Place a SPECTRALINK battery into each charger position. Verify that each
AMERI*CAN TELECOM INC. Technical Document 2. Position the enclosure on the wall in the location it will be mounted. Ensure that it’s at the appropriate height, and level; mark the position of the four mounting holes, forming a rectangle 26” by 4 3/8”. Refer to the illustration below. Note: If the wall is wallpapered, use a razor to cut the area around the mark before drilling. 3. Use a 1/8” bit to drill the pilot holes for the wall anchors to mount the enclosure. 4. Insert the anc
AMERI*CAN TELECOM INC. Technical Document SL PTG012 Installation Instructions Page 5
|1||Sony 1261-4434||Cell Phone||10|
|2||Sony 1261-4174||Cell Phone||39|
|3||Sony 1264-0776||Cell Phone||22|
|4||Sony 1264-0770||Cell Phone||16|
|5||Sony 1261-4451||Cell Phone||21|