ملخص المحتوى في الصفحة رقم 1
Owner's
Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS Page Page Safety Instructions 2 Maintenance 10 Before You Begin 4 Storage 11 Hardware Illustrations 5 Product Parts Drawing 12 Assembly Instructions 6 Parts List 13 Using The Electronics Meter 8 Warranty 14 Treadmill Adjustments 9 Fax/Mail Ordering Form 15 SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following Safety Instructions before TM using the InMotion II Treadmill. TM 1. Read all warnings posted on the InMotion II Treadmill. TM
ملخص المحتوى في الصفحة رقم 3
CALL US FIRST THANK YOU FOR PURCHASING THE TM InMotion II Treadmill To help you get started, we have pre-assembled most of your TM InMotion II Treadmill at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. Within a few minutes you will be getting your body into shape and on your way to achieving a happier and healthier lifestyle. Should you have any questions, please call our Customer Se
ملخص المحتوى في الصفحة رقم 4
BEFORE YOU BEGIN TM Although Stamina tries to manufacture its products Thank you for choosing the InMotion II with the finest materials and uses the highest Treadmill. We take great pride in producing this standards of manufacturing, occasionally a part that quality product and hope it will provide many hours does not fit, is the incorrect size, or is otherwise of quality exercise to make you feel better, look better inappropriate is found. Even with the highest and enjoy life to its ful
ملخص المحتوى في الصفحة رقم 5
HARDWARE IDENTIFICATION CHAT This chart is provided to help identify the hardware used in the assembly process. After unpacking the unit, open the hardware bag and make sure that you have the following items: 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 02 1/2 1 1/2 1/2 3 1/2 4 1/2 5 1/2 6 in. mm. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 MILLIMETERS length 6 8 10 12 Place washers, the end of bolts or screws on the circles to check for the correct size. Use the small scale to check the sizes of
ملخص المحتوى في الصفحة رقم 6
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com Sensor Wire STEP 1 NOTE: The LEFT UPRIGHT(2) is the o
ملخص المحتوى في الصفحة رقم 7
ASSEMBLY INSTRUCTIONS STEP 3: Place the BASE FRAME(1) between the LEFT and RIGHT UPRIGHTS(2, 3) and secure with HEX BOLTS(M12 x 70mm)(39) and WASHERS(M12)(48). DO NOT TIGHTEN COMPLETELY. STEP 4: Secure the U-SHAPED HANDRAIL(5) onto the LEFT and RIGHT UPRIGHTS(2, 3) with BUTTON HEAD BOLTS(6mm x 15mm)(40) and ARC WASHERS(M6)(44). Connect the UPPER EXTENSION WIRE(28) to the LOWER EXTENSION WIRE(29). STEP 5: Go back and tighten HEX BOLTS(M12 x 70mm)(39) in STEP 2. Connect the LOWER EXTENSION W
ملخص المحتوى في الصفحة رقم 8
USING THE ELECTRONIC METER POWER ON : Walking Belt movement or push the button. POWER OFF : Automatic shut off after 4 minutes of inactivity. MODE / CLEAR BUTTON: Press and release to select functions. Press and hold for three seconds to reset all functions to zero. FUNCTIONS: SCAN: Automatically scans TIME, SPEED, DISTANCE, and CALORIES in sequence with a change every four seconds. Press and release the button until " " appears on the display and points to SCAN. TIME: Displays the time, from
ملخص المحتوى في الصفحة رقم 9
TREADMILL ADJUSTMENTS The basic idea behind the manual treadmill is to have the belt running on a treadmill board and between two rollers so that the belt will move without much effort. In order for the belt to run smoothly, there are a few points that need to be noted. BELT ALIGNMENT The belt must be in the center of the treadmill to prevent it from rubbing against the flywheels. If the belt rubs a flywheel, it will be difficult to keep the belt moving and eventually damage the edge of the be
ملخص المحتوى في الصفحة رقم 10
TREADMILL ADJUSTMENTS WALKING RESISTANCE The walking resistance or effort needed to push the treadmill belt can be adjusted by changing the incline angle. This treadmill has two adjustment positions. Highest Resistance Lowest Resistance The BUMPER STANDS(22) are attached to Remove (unscrew) the BUMPER STANDS(22) the bottom of the treadmill. from the bottom of the treadmill and store them in the end of the treadmill. NOTE: 1. Since this is a new machine, you may need some time to get used to walk
ملخص المحتوى في الصفحة رقم 11
STORAGE TM 1. To store the InMotion II Treadmill simply keep it in a clean dry place. TM 2. To avoid damage to the electronics meter, remove the batteries before storing the InMotion II Treadmill for one year or more. TM 3. Follow the following process to fold The InMotion II Treadmill as illustrated for easy storage. a. Remove the PULL PIN(9) to unlock the BASE FRAME ASSEMBLY(1). b. Fold up the BASE FRAME ASSEMBLY(1). Pull out the BALL KNOB(8) on the spring pin and release to lock the BASE FRA
ملخص المحتوى في الصفحة رقم 12
PRODUCT PARTS DRAWING FRONT Belt Guides BACK 12
ملخص المحتوى في الصفحة رقم 13
PARTS LIST DIAGRAM# PART NAME QTY 1 Base Frame 1 2 Left Upright 1 3 Right Upright 1 4 Upright Support 1 5 U-Shaped Handrail 1 6 Spring Pin 1 7 Spring 1 8 Ball Knob 1 9 Pull Pin 1 10 Front Roller /w Flywheels 1 11 Front Shaft 1 12 Bearing (6000zz) 4 13 Plastic Washer (M10) 4 14 Rear Roller 1 15 Rear Shaft 1 16 Adjustment Bracket 2 17 Walking Belt 1 18 Board 1 19 Left Side Molding 1 20 Right Side Molding 1 21 Round Cap (38mm)
ملخص المحتوى في الصفحة رقم 14
LIMITED WARRANTY MODEL 45-1002 WARRANTY Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship under normal use, service and proper operation for a period of 90 days on the parts and one year on the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAI
ملخص المحتوى في الصفحة رقم 15
FAX/MAIL ORDERING FORM Please do not return the product. For your convenience, Stamina has a Customer Service Department with a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520 (in the U.S.) between 8:00 A.M. and 5:00 P.M. Central Time, Monday through Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064. Our Customer Service Department will be able to assist you with your problem and the part will be mailed directl
