Bernard SGA-2 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Available Necks
1.0
1.4 Spool Gun & Push-Pull Gun Conversion Kits
26.0 1.6
35.5
41.5
2.5 QT3-30
QT2-30 3.0
63.1
(30 Deg Bend)
QT2-45
QT2-60
76.6
(30 Deg Bend)
QT2-80
(45 Deg Bend)
(60 Deg Bend)
(80 Deg Bend)
5.1 Issued Mar. 2008 • Index No. SPEC SGA-1.1
3.6
130.4
3.4
92.3
86.3 4.3
110.1
3.6
91.8 Mig Welding Accessory
The Right Tool For The Job.
2.1 2.0
2.6 51.2
52.9
QT3-45 65.4 QT5-30
QT3-60 To improve comfort and minimize
(45 Deg Bend)
(30 Deg Bend)
(60 Deg Bend) 4.3
110.1
downtime, these co

ملخص المحتوى في الصفحة رقم 2

Available Parts Installation Instructions 1 1. Remove existing barrel assembly per gun manufacturers directions 2. Install plastic liner from kit into neck/adapter assembly as shown below. 2a. (Optional) Trim plastic liner flush with end of adapter to use standard Bernard Jump Liner in neck. See Jump Liner spec sheet for additional options. 3. Connect Bernard neck to brass adapter. See back page for available neck options. 2 1 4. Install neck/adapter assembly into gun. Secure per gun manuf

ملخص المحتوى في الصفحة رقم 3

Available Parts Installation Instructions 1 1. Remove existing barrel assembly per gun manufacturers directions 2. Install plastic liner from kit into neck/adapter assembly as shown below. 2a. (Optional) Trim plastic liner flush with end of adapter to use standard Bernard Jump Liner in neck. See Jump Liner spec sheet for additional options. 3. Connect Bernard neck to brass adapter. See back page for available neck options. 2 1 4. Install neck/adapter assembly into gun. Secure per gun manuf

ملخص المحتوى في الصفحة رقم 4

Available Necks 1.0 1.4 Spool Gun & Push-Pull Gun Conversion Kits 26.0 1.6 35.5 41.5 2.5 QT3-30 QT2-30 3.0 63.1 (30 Deg Bend) QT2-45 QT2-60 76.6 (30 Deg Bend) QT2-80 (45 Deg Bend) (60 Deg Bend) (80 Deg Bend) 5.1 Issued Mar. 2008 • Index No. SPEC SGA-1.1 3.6 130.4 3.4 92.3 86.3 4.3 110.1 3.6 91.8 Mig Welding Accessory The Right Tool For The Job. 2.1 2.0 2.6 51.2 52.9 QT3-45 65.4 QT5-30 QT3-60 To improve comfort and minimize (45 Deg Bend) (30 Deg Bend) (60 Deg Bend) 4.3 110.1 downtime, these co