Addonics Technologies HDMU3 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

T E C H N O L O G I E S
User Guide
Mini HDD Duplicator Station
(HDMU3)
www.addonics.com
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/

ملخص المحتوى في الصفحة رقم 2

Unpacking and Overview Disk 2 Disk 1 Drive Slot Drive Slot Clone Button Back-up button Eject Buttons Progress LEDs Disk 1 LED Disk 2 LED Power LED USB 3.0 Power Connector Switch Power Supply Connector Power Cable USB 3.0 Cable Drive slots: Insert hard drive with SATA connector facing down and on the left side. For 2.5” drives and smaller media installed in adapters, insert the drive thorough the slot in the top of the unit. For 3.5” drives, insert the drive by pressing it through the door on

ملخص المحتوى في الصفحة رقم 3

Eject buttons: Press down firmly to unseat the drive from the SATA connector inside the unit. Power LED: Glows to indicate the unit is powered up. Disk LED (Disk1 and Disk2): Glows to indicate a drive is connected and powered up, blinks to indicate activity. Duplication Progress LEDs: When connected to a USB host, these blink in unison to indicate I/O activity. With no host connected, they will remain dark until a copy operation is started. Clone Button: Press and hold for three seconds to s

ملخص المحتوى في الصفحة رقم 4

CONTACT US www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/