Addonics Technologies ADSA3GPX8-4E دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

User Guide
4 Port eSATA RAID5/JBOD
T E C H N O L O G I E S
PCI-E 8x Controller
(ADSA3GPX8-4E)
BIOS Jumper (J4)
Hard Drive Activity LED
Jumper Connections
Fan
eSATA Ports
BIOS Jumper (J4)
Enable BIOS (1-2) – RAID firmware is active
Disable BIOS (2-3) – Base firmware is active
By default, the BIOS jumper is set to enable BIOS (1-2) for the ADSA3GPX8-4E. This means that when
you boot into a system, after POST, the RAID BIOS of the controller card with the attach devices shows
up. The RAID driver

ملخص المحتوى في الصفحة رقم 2

Software Installation for RAID: Note: Install the SATA Utilities from the CD that came with your package first before installing the Host Controller. A. From the CD start-up menu select SATA RAID Utilities. Select Model #ADSA3GPX8-4E. B. Unzip the file on your drive. C. Click on the folder that matches your OS. Run the 3124-W-I32-R_version.msi. Hardware Installations: 1. Power OFF PC and remove its cover. 2. Select an empty PCI-E 8x slot and insert the SATA Controller. 3. Makes su