Sears 53DS900077 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Instructions
GENERAL
Follow all safety codes. Wear safety glasses and work gloves. Use
quenching cloth for brazing operations. Have fire extinguisher
These instructions cover the installation of the accessory wall
available. Read these instructions thoroughly and follow all
mounting kit. The kit is provided for mounting cooling only,
warnings or cautions attached to the unit. Consult local building
multi-split, and heat pump units to a wall due to space
codes and National Electrical

ملخص المحتوى في الصفحة رقم 2

4.Drill6 mounting holes inmarked-off locations onthe NOTE: For38BN units only, arubber spacer isprovided tofill wall.Forwood wallmounting, drill5/16-in. diameter space inthewallbracket channel underneath themounting feet. holes. Formasonry wallmounting, drill5/8-in. diameter See Fig. 3. holes and insert 3/8-in. steel shields (anchors). 5.Assemble thebracket sections asshown inFig.2,using bracket assembly bolts, lockwashers and bracket assembly locknuts. Donottighten thebracket assembly bolts unt

ملخص المحتوى في الصفحة رقم 3

HOLE FOR HOLE FOR BOLT HEAD MOUNTING ON DIAGONAL BRACE FOOT INSTALL RUBBER PAD (SHIPPED WITH 38BN UNIT) SPACER IN WALL BRACKET CHANNEL. (_1" LONG BOLT D06008 Fig. 3 - 38BN Units Only

ملخص المحتوى في الصفحة رقم 4

Copyright 2006 CAC / BDP * 7310 W. Morris St. * indianapolis, IN 46231 Printed in USA. Edition Date: 05/06 Catalol_ No: IIK-53DS900-3 Replaces: 38-56Sl Manufacturer reserves the right to change_ at any time_ specifications and designs without notice and without obligations.