Inhaltszusammenfassung zur Seite Nr. 1
4-205-420-62
R
420542062
Trinitron Colour
Television
GB
Instruction Manual
GB
GB
KV-28FS20U
This Instruction Manual has been produced using
© 2000 by Sony Corporation Printed in UK
Totally chlorine free (TCF) 100% Re-cycled paper
to comply with our commitment to the use of
environmentally friendly materials in our products.
Inhaltszusammenfassung zur Seite Nr. 2
NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA ASA or BSI to BS 1362 (i.e. marked with T or ) must be used. When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment ha
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Table of Contents Getting Started Checking the accessories supplied 2 Inserting batteries into the remote control 2 Connecting the speakers 3 Connecting the aerial 5 Switching on the TV 5 Automatically tuning the TV 6 Overview Overview of the TV set buttons 7 Overview of the remote control buttons 8 Additional TV Features Choosing a language for the TV menu screens 9 Automatically tuning the TV 10 Re-arranging the TV channels 11 Adjusting the picture 12 Changing picture and sou
Inhaltszusammenfassung zur Seite Nr. 4
Getting Started Follow steps 1-6 to: Check the accessories supplied Insert batteries into your remote control Connect the speakers Connect the aerial to your TV Plug in and switch on the TV View programmes on your TV 1. Checking the accessories supplied Surround speakers Centre speaker Batteries Remote control 2. Inserting batteries into the remote control Always remember to dispose of used batteries in an environmentally friendly way. 2
Inhaltszusammenfassung zur Seite Nr. 5
S S C R/D/ L/G/ D/D S/I Getting Started 3.1. Connecting the speakers Before switching on the TV, please connect the speakers to the TV using the leads provided. Connect the striped lead to the red terminals and the black lead to the black terminals. Dolby* ProLogic Surround normally requires 5 speakers: Centre Speaker - to anchor the fixed sounds, like dialogues, to the screen. Left and Right Front Speakers (incorporated in the TV) - for the normal two channel stereo or bilingual broadcasts. Su
Inhaltszusammenfassung zur Seite Nr. 6
S S C R/D/ L/G/ D/D S/I Getting Started 3.2. Connecting the speakers To connect your own speakers (when using your own speakers, make sure they are at least 4 ohms impedance and magnetically shielded) Connect black leads to black terminals R/D/ L/G/ S S C D/D S/I Connect striped leads to red terminals Striped Black lead lead Right speaker Left speaker Centre speaker Surround speakers Note: When you connect your own external left and right speakers you must mute the internal speakers by pressi
Inhaltszusammenfassung zur Seite Nr. 7
Getting Started 4. Connecting the aerial Connect your existing aerial to the socket marked on the rear of the TV. 5. Switching on the TV Connect the TV plug to the mains socket (220-240V AC, 50Hz) and switch socket on. Push in the on/off switch on the front of the TV. 5
Inhaltszusammenfassung zur Seite Nr. 8
Getting Started 6. Automatically tuning the TV When you first switch on the TV, the following sequence of menu screens appear on the TV enabling you to 1) choose a language for the TV menu screens, 2) tune channels to the TV, 3) arrange the channels. 1. When switching on the TV for the first time, the ‘LANGUAGE’ menu appears automatically on the TV screen enabling you to select in which language you wish to read the TV menu screens. Press the V or v buttons on the remote control to select y
Inhaltszusammenfassung zur Seite Nr. 9
Overview Overview of the TV set buttons On/Off switch. Press to switch TV on and off. Auto tune button. Video input button. Press to select the automatic Press to select the input tuning function. signals from VCR etc. Volume control buttons. Programme Up or Down buttons. Press to increase(+)/decrease(-) volume. Press to increase(+)/decrease(-) channels. 7
Inhaltszusammenfassung zur Seite Nr. 10
Overview Overview of the remote control buttons To mute sound To temporarily switch off TV Press to mute TV sound. Press again to Press to temporarily switch off TV. Press again to restore the sound. switch on from standby mode. To save energy, we recommend switching off completely when TV is not in use. To reveal on screen information NOTE: After 15-30 minutes without a TV signal and Press to reveal all on-screen indications. without any button being pressed, the TV switches Press again to
Inhaltszusammenfassung zur Seite Nr. 11
Additional TV Features Choosing a language for the TV menu screens The TV consists of a menu system which can appear on screen in a variety of languages. Use the following feature to select the language that best suits you. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the V or v buttons to select the symbol on the menu screen then press the b button to enter the ‘PRESET’ menu. 3. Press the V or v buttons to select ‘Language’ on the menu scree
Inhaltszusammenfassung zur Seite Nr. 12
Additional TV Features Automatically tuning the TV You have already tuned in all available channels using the ‘Automatically tuning the TV’ section at the start of this manual. If you need to repeat the tuning procedure however, follow the instructions below and the TV automatically searches and stores all available channels for you. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the V or v buttons to select the symbol on the menu screen then pre
Inhaltszusammenfassung zur Seite Nr. 13
Additional TV Features Re-arranging the TV channels After tuning the TV, you can use this feature to change the channel order. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the V or v buttons to select the symbol on the menu screen then press the b button to enter the ‘PRESET’ menu. 3. Press the v button to select ‘Programme Sorting’ then press the b button to enter the ‘PROGRAMME SORTING’ menu. OK 4. Press the V or v buttons to select th
Inhaltszusammenfassung zur Seite Nr. 14
Additional TV Features Adjusting the picture Although the picture is adjusted at the factory, you can modify it to suit your own taste. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the V or v buttons on the remote control to select the symbol on the menu screen then press the b button to enter the ‘PICTURE CONTROL’ menu. 3. Press the V or v buttons to select the item on the screen you wish to adjust then press the b button to confirm. For a
Inhaltszusammenfassung zur Seite Nr. 15
Additional TV Features Adjusting the sound Although the sound is adjusted at the factory, you can modify it to suit your own taste. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the V or v buttons on the remote control to select the symbol on the menu screen then press the b button to enter the ‘SOUND CONTROL’ menu. 3. Press the V or v buttons to select the item on the screen you wish to adjust then press the b button to confirm. For a descri
Inhaltszusammenfassung zur Seite Nr. 16
Additional TV Features Setting up Dolby Pro Logic Before listening to Dolby Pro Logic encoded programmes, you can adapt the Dolby features to suit your own taste. Normally this is only required when you install the TV and the speakers, or when changing the speaker positions. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the V or v buttons to select the symbol on the menu screen then press the b button to enter the ‘PRESET’ menu. 3. Press the V
Inhaltszusammenfassung zur Seite Nr. 17
Additional TV Features Changing the screen mode Using this Screen Mode feature you can change the aspect ratio of the screen. 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the V or v buttons on the remote control to select the symbol on the menu screen then press the b button to enter the ‘PICTURE CONTROL’ menu. 3. Press the V or v buttons to select ‘Format’ on the menu FORMAT screen then press the b button to enter the ‘FORMAT’ menu. Format
Inhaltszusammenfassung zur Seite Nr. 18
Additional TV Features Using the further programme preset feature With this feature you can a) manually fine-tune the TV to obtain a better picture reception if the picture is distorted or b) preset the AV output to the programme positions of channels with scrambled signals (e.g. from a pay TV decoder). In this way a connected VCR records the unscrambled signal. PICTURE CONTROL 1. Press the MENU button on the remote control to display Picture Mode Personal . . . . . . . . . PICTURE CONTROL Cont
Inhaltszusammenfassung zur Seite Nr. 19
Additional TV Features Adjusting the picture rotation If, due to the earth’s magnetic field, the picture slants, you can use this feature to readjust the picture. PICTURE CONTROL 1. Press the MENU button on the remote control to display the menu on Picture Mode Personal . . . . . . . . . PICTURE CONTROL Contrast Picture Mode Personal . . . . . . . . . Contrast Reset Reset FormatFormat Wide FormatFormat Wide the TV screen. 2. Press the V or v buttons to select the symbol on the menu screen t
Inhaltszusammenfassung zur Seite Nr. 20
Additional TV Features Using the sleep timer The TV can be set to switch automatically to standby mode after a length of time chosen by you. You may set the time in 30 minute steps up to 4 hours. PICTURE CONTROL 1. Press the MENU button on the remote control to display Picture Mode Personal . . . . . . . . . PICTURE CONTROL Contrast Picture Mode Personal . . . . . . . . . Contrast Reset Reset FormatFormat Wide FormatFormat Wide the menu on the TV screen. / TIMER 2. Press the V or v buttons on
