Inhaltszusammenfassung zur Seite Nr. 1
UDIOVOX PECIALIZED PPLICATIONS, L.L.C.
19” COLOR TELEVISION
AVT-1940
The serial number is located on the rear of the set.
For future reference, please copy the number here.
Serial No.________________________________
INSTRUCTION MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the product. To prevent fire or shock hazard,
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Important Safeguards………………………………………………………………2 Your TV’s Front Panel……………………………………………………….4 Your TV’s Back Panel……………………………………………………….4 Your Remote Control Installing your remote control batteries……………………………...6 Notes……………………………………………………………………6 Chapter 2: Connecting an Antenna or Cable to your TV…………………….7 Connecting an Antenna……………………………………………………...7 Connecting Safety Note…………………………………………………………………….9 Chapter 3: Operating Your TV…………………………………………………….10 Turning
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
c) f) service. Important Safeguards- 3 performance this indicates a need for exhibits a distinct change in When the television equipment damaged. dropped or the cabinet has been If the television equipment has been e) to its normal operation. technician to restore the TV receiver extensive work by a qualified result in damage and will often require adjustment of other controls may operating instructions as an improper those controls that are covered by the operating inst
Inhaltszusammenfassung zur Seite Nr. 6
Inhaltszusammenfassung zur Seite Nr. 7
Your Remote Control 1. Use this button to turn your TV on or off. 2. MUTE Use this to turn the TV’s sound on and off 3. ùù üü Use these buttons to change channels on your TV, or to select 4. ÿÿ ÷÷ Use these buttons to change your TV’s volume, to activate selections in the menu system, or to change audio and video settings. 5. Use this button to turn the TV’s menu system on and off. 6. Use this button to display the channel number and status. 7. INPUT Use this button to select the TV’s signal
Inhaltszusammenfassung zur Seite Nr. 8
Installing your Remote Control Batteries 1. Open the battery compartment on the back of the remote control. 2. Install the two AAA- size batteries (not included) as shown. Make sure the “+” and “-“ terminals are oriented correctly. 3. Replace the cover. Do not mix different types of batteries, or mix an old and a new battery. Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries properly: never throw them into a fire. Point your remote at
Inhaltszusammenfassung zur Seite Nr. 9
2 Connecting an Antenna or cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below to make this connection. Please note that you will All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a silver metal post partially surrounded by two plastic tabs. For help in locating the antenna terminal, see “Your TV’s Back Panel” on page 4. Connecting an Antenn
Inhaltszusammenfassung zur Seite Nr. 10
Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one for UHF signals. If your antenna system has both a coaxial lead and twin 300 Ω Ω combiner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the the combiner onto the antenna terminal on the back of your TV. If your antenna system has two sets of twin 300 Ω
Inhaltszusammenfassung zur Seite Nr. 11
If your cable system requires you to use a converter box for all channels cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on your TV. You will need to keep your TV tuned to If your cable system only requires you to use a converter box for some channels (i.e. pay-TV follow these steps: find the primary incoming coaxial cable. Plug this cable into a splitter (available at your local electronics store).
Inhaltszusammenfassung zur Seite Nr. 12
Inhaltszusammenfassung zur Seite Nr. 13
Changing Channels You can change channels in three ways: 1. The ù CH ü buttons will take you through all memorized channels, one by one. The ù CH ü buttons will not access channels that Your TV's Channel Memory" on the previous page. 2. The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel enter it’s number: the TV will tune to the new channel when you enter the second digit of the channel. 3. The PREVIOUS button will take you instantly
Inhaltszusammenfassung zur Seite Nr. 14
Changing the TV’s Channel Memory Your TV’s channel determines the channels that are available using the ù CH ü you can tune to it with the ù CH ü buttons. If there is just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if there are two or more channels memorized, then the Add/Delete Channels function will search the memorized channels only. 1. Use the number buttons to tune to the channel. 2. Press the MENU button twice, then “Set Up” menu will
Inhaltszusammenfassung zur Seite Nr. 15
Adjusting Video Settings You may wish to adjust the video settings (e.g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1. With the TV on, press the MENU button, then the “video” menu will appear. 2. The “settings” item will be selected. Use the ÿ VOL ÷ 3. Use the ù CH ü settings are on the next page. 4. Use the ÿ VOL ÷ buttons to adjust the video setting to the level you prefer. 5. Use the ù CH ü 6. When you are finished, press the MENU button until
Inhaltszusammenfassung zur Seite Nr. 16
Returning to the Factory Settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps: 1. With the TV on, press the MENU button, then “Video” menu will appear. 2. Press the ÿ ÷ buttons to set the “Settings” to “Preset”. The TV will remember the “Custom” settings you had previously chosen. When you set “Settings” to “Custom” again, your previous custom settings will be restored. Descriptions of Video settings The contrast setting
Inhaltszusammenfassung zur Seite Nr. 17
4 Your TV has a built-in clock, and you can set the TV to turn on and off at times that you select. You Setting the Clock 1. With the TV turned on, press the MENU button until “Time” menu is displayed. 2. The “Set Clock” item will be selected. Press the ÿ VOL ÷ down either ÿ ÷ button, the corresponding numbers will change more quickly. 3. When the clock is set correctly, use the ù CH ü the MENU button until menu OSD will disappear. Setting the Wake-Up timer Follow these instructions to set the
Inhaltszusammenfassung zur Seite Nr. 18
Setting the Off Timer these instructions to set the “Off time”. 1. With the TV turned on, press the MENU button until “Time” menu is displayed. 2. Use the ù CH ü 3. If you hold down either ÿ ÷ quickly. 4. When the setting is correct, use the ù CH ü MENU button until menu OSD is displayed. Canceling the Wake-up Timer or Off Timer If you would like to cancel the wake-up timer or the Off timer, Press the ÿ VOL ÷ timer settings return to “--:--“. The wake-up Timer and Off Timer will not function cor
Inhaltszusammenfassung zur Seite Nr. 19
Setting the Sleep Timer The sleep timer allows you to set the amount of time from 15 minutes to 120 minutes. TV will count down the amount of time you set, then turn itself off. To set the sleep timer: 1. With the TV turned on, press the MENU button until “Time” menu is displayed. 2. Use the ù CH ü 3. Use the ÿ VOL ÷ buttons to set the sleep time. Each time you press VOL, you step between the available sleep times: 15 min., 30 min., 45 min., 90 min., or 120 min. 4. When the setting is correct,
Inhaltszusammenfassung zur Seite Nr. 20
5 This section contains descriptions of the more advanced features of your TV. Changing the language of the On-screen Menus You can choose to display the on-screen menus in English, Spanish, or French. To choose the on-screen language: 1. With the TV on, press the MENU button twice, then “Set-Up” menu will appear. 2. The “Language” item will be selected. Press the ÿ VOL ÷ you want to use: English, Spanish or French. 3. To return to normal TV viewing, press the MENU button
