Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
INTRODUCTION Thank you for purchasing our product. To ensure that you fully understand the capabilities of this television set, please read this entire manual carefully, and keep it handy for future reference. INSTALLATION Locate the TV set in a room where direct light does not reflect on the screen. Total darkness or a reflection on the picture screen can cause eye strain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the TV set and the
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS 11. GROUNDING OR POLARIZATION All the safety and operating instructions should be read This unit is equipped with a polarized alternating current line plug (plug having one blade wider than the other). This before the unit is operated. plug will fit into the power outlet only one way. This is a 2. RETAIN INSTRUCTIONS safety feature. If you are unable to insert the plug fully into The safety and operating instructions should be retained the outle
Inhaltszusammenfassung zur Seite Nr. 4
18. SERVICING Do not attempt to service this unit yourself as opening or 21. SAFETY CHECK removing covers may expose you to dangerous voltage or Upon completion of any service or repairs to this unit, ask other hazards. Refer all servicing to qualified service the service technician to perform safety checks to personnel. determine that the unit is in proper operating condition. 19. DAMAGE REQUIRING SERVICE 22. HEAT Unplug this unit from the wall outlet and refer servicing to The prod
Inhaltszusammenfassung zur Seite Nr. 5
LOCATION OF CONTROLS Television Set 1. Side A/V Inputs 9. Power Indicator 2. Speaker 10. Remote Sensor 3. TV/AV Selector 11. Main Power Switch 4. Menu Button 12. Speaker 5. Volume Down Button 13. AC power Cord 6. Volume Up Button 14. Audio/Video-input and output jacks 7. Channel Down Button 15. Antenna terminal (75 ohms) 8. Channel Up Button 16. S-VIDEO
Inhaltszusammenfassung zur Seite Nr. 6
Connection to Other Devices This TV set can be connected to a VCR, DVD player, video camera, game system or any other A/V component. DVD Player Side Jacks Video/Audio equipment can be connected to AUDIO and VIDEO IN jacks located on the back or side panel of the TV set. VCR OUT IN
Inhaltszusammenfassung zur Seite Nr. 7
REMOTE CONTROL
Inhaltszusammenfassung zur Seite Nr. 8
USING THE REMOTE CONTROL Installing batteries Notes: Use only the size and type of batteries specified. Do not mix different types of batteries together or old batteries with fresh ones. Remove the batteries when remote control will not be used for a long period of time. Avoid direct sunlight, incandescent lamp, fluorescent lamp or any other strong light shines on batteries. Do not try to recharge batteries; they are not intended to be recharged. Do not drop, dampen or d
Inhaltszusammenfassung zur Seite Nr. 9
Inhaltszusammenfassung zur Seite Nr. 10
1. Press MENU button repeatedly to display Search menu. 2. Press CH- or CH+ to select Channel menu item. 3. Press V- or V+ to select the unwanted channel. 4. Press CH- or CH+ to select Skip. 5. Press V- or V+ to select Skip ON. Thus, after exiting the menu, the channel will then be skipped when you select programs with the Channel up/down button. If you want to skip other unwanted channels, repeat steps above to change the channel number. Notes: You can select the skipped channel by pre
Inhaltszusammenfassung zur Seite Nr. 11
Use DSP button to know the current channel number Press DSP button to display the current TV state. If in TV program 12 ST SAP viewing, then it will display the current channel number, sound mode and remaining sleep time (if set). To scan programs Press SCAN button, the TV set will scan the channels from current channel to higher channels one by one, every program will be displayed for about one second and then go on scanning. Press SCAN button again, the screen will settle at the current
Inhaltszusammenfassung zur Seite Nr. 12
SOUND CONTROLS Adjusting Volume 1. Use Volume up/down button 2. Press V- button, the volume decreases; Press V+ button, the volume increases. 3. Make use of Sound menu to adjust volume 4. Press MENU twice to display Sound menu, then make use of V+/-button to adjust the level. Use MUTE button Press MUTE button on the remote control to cut off the sound from TV. To resume the sound, press this button again. TIMER SETTING Setting clock time Making use of this function can set the c
Inhaltszusammenfassung zur Seite Nr. 13
preset time. For example, if you would like the TV to auto turn off in 60 minutes, you can press button repeatedly until the screen displays the desired amount of time. If you want to cancel the sleep timer, you can press button repeatedly until 0 displays on the screen. SYSTEM SETTINGS To select OSD language There are multi OSD languages in this TV set provided for you to select (OSD: on-screen display) 1. Press MENU repeatedly to display Settings menu. 2. Press CH+/- to select Langu
Inhaltszusammenfassung zur Seite Nr. 14
Audio output: 2 speakers of 3W each Audio output mode: RF-MONO, A/V STEREO Antenna impedance: 75 ohm terminal Output terminal: Video input 1vp-p/75 Ohm, audio input 400mV Closed caption: NTSC/M receiving time (cc1-cc4/tt1-tt4) OSD Language: English/French Power: AC 90-130V, 50/60 Hz Measurements 20" – 600 x 482 x 445 (mm) (Length Width Height): 24" – 710 x 485 x 515 (mm) 27" – 777 x 500 x 577 (mm) Net Weight: 20" – 21 kg, 24" – 28 kg and 27" – 35 kg Accessories: one remote control on
