Inhaltszusammenfassung zur Seite Nr. 1
MULTIMEDIA PROJECTOR
MODEL LC-SM2
OWNERS MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
LC-SM2 TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, rea
Inhaltszusammenfassung zur Seite Nr. 3
LC-SM2 SAFETY INSTRUCTIONS All the safety and operating instructions should be read Never push objects of any kind into this projector through before the product is operated. cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric Read all of the instructions given here and retain them shock. Never spill liquid of any kind on the projector. for later use. Unplug this projector from AC power supply This projector should be oper
Inhaltszusammenfassung zur Seite Nr. 4
LC-SM2 Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
Inhaltszusammenfassung zur Seite Nr. 5
LC-SM2 TABLE OF CONTENTS FEATURES AND DESIGN 6 COMPUTER MODE 22 SELECTING COMPUTER MODE 22 SELECTING COMPUTER SYSTEM 22 COMPATIBLE COMPUTER SPECIFICATIONS 23 PREPARATION 7 PC ADJUSTMENT 24 PICTURE IMAGE ADJUSTMENT 26 NAME OF EACH PART OF THE PROJECTOR7 ADJUST PICTURE IMAGE MANUALLY 26 SETTING-UP THE PROJECTOR 8 CONNECTING THE AC POWER CORD 8 NORMAL FUNCTION 26 POSITIONING THE PROJECTOR 9 AUTO IMAGE FUNCTION 27 PICTURE POSITION ADJUSTMENT 27 ADJUSTABLE FEET 9 MOVIN
Inhaltszusammenfassung zur Seite Nr. 6
LC-SM2 FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design Multi-Scan System This projector is extremely compact in size and This projector has Multi-Scan System to conform to weight. It is designed to carry and work anywhere almost all co
Inhaltszusammenfassung zur Seite Nr. 7
LC-SM2 PREPARATION 7
Inhaltszusammenfassung zur Seite Nr. 8
LC-SM2 PREPARATION CONNECTING THE AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200- 240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use.
Inhaltszusammenfassung zur Seite Nr. 9
LC-SM2 PREPARATION POSITIONING THE PROJECTOR This projector is designed to project on a flat ROOM LIGHT projection surface. The brightness in the room has a great The projector can be focused from 4.6 (1.4m) 26.3 influence on the picture quality. It is (8.Om). recommended to limit ambient lighting in Refer to the figure below to adjust the screen slze. order to provide the best image. ADJUSTABLE FEET Picture tilt and projection ang
Inhaltszusammenfassung zur Seite Nr. 10
LC-SM2 PREPERATION MOVING THE PROJECTOR When moving the projector, replace the lens cover and retract the feet to prevent damage to the lens and cabinet. When this projector is not in use for an extended period, put it into the case (carrying bag) supplied with this projector. The Carrying Bag (supplied) is intended for protection from dust and scratches on the surface of the cabinet, and it is not designed to protect the LCD projector from ex
Inhaltszusammenfassung zur Seite Nr. 11
CONNECTING THE PROJECTOR Connect the composite video output from the video equipment to the to the Connect the S-VIDEO output from Y/VIDEO or connect the the video equipment to this component video outputs. terminal. (Refer to P12.) , Pb/Cb and Pr/Cr jacks (Refer to P12.) Connect the audio output from the video equipment to this terminal. This projector uses a micro (Refer to P12.) processor to control the unit. Occasionally, the micro processor may malfuncti
Inhaltszusammenfassung zur Seite Nr. 12
CONNECTING THE PROJECTOR Cables used for connection (* = Cables are not supplied with this projector.) Video Cable (RCA x 1 or RCA x 3) * S-VIDEO Cable * Audio Cable (RCA x 2- Mini Plug x 1 (stereo) or Mini Plug (stereo)) * 12
Inhaltszusammenfassung zur Seite Nr. 13
CONNECTING THE PROJECTOR Cables used for connection (* = Cables are not supplied with this projector.) VGA CABLE (HDB 15 pin) CONTROL CABLE FOR PS/2 PORT CONTROL CABLE FOR SERIAL PORT, or ADB PORT * AUDIO CABLE (Mini Plug (stereo)) * MAC ADAPTER (When connecting to Macintosh computer) * 13
Inhaltszusammenfassung zur Seite Nr. 14
BEFORE OPERATION Operating Range Point the remote control toward the projector (the Remote Receiver) whenever pressing the buttons. Maximum operating range for the remote control is about 16.4 (5m) and 60° in front of the projector. 14
Inhaltszusammenfassung zur Seite Nr. 15
BEFORE OPERATION Remote Control Batteries Installation To insure safe operation, please observe the following precautions: Use (2) AA, UM3 or R06 type alkaline batteries. Replace two batteries at the same time. Do not use a new battery with a used battery. Avoid contact with water or liquid. Do not expose the Remote Control Unit to moisture,
Inhaltszusammenfassung zur Seite Nr. 16
BEFORE OPERATION 16
Inhaltszusammenfassung zur Seite Nr. 17
HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through the ON- SCREEN MENU. Refer to the following pages to operate each adjustment in the ON-SCREEN MENU. Move the pointer (see the NOTE below) by pressing POINT button(s) on the TOP CONTROL or the REMOTE CONTROL. Select the item by pressing SELECT button. NOTE: Pointer is the icon on the ON-SCREEN Menu to select the item. See the figures on the section FLOW OF ON-SCRE
Inhaltszusammenfassung zur Seite Nr. 18
BEFORE OPERATION Press MENU BUTTON while in Computer mode. 18
Inhaltszusammenfassung zur Seite Nr. 19
BASIC OPERATION TURNING ON THE PROJECTOR 1 Complete the peripheral connections (with Computer, VCR, etc.) before turning on the projector. (Refer to CONNECTING TO THE PROJECTOR on Pages 11~-13 for connecting that equipment.) 2 Connect the projectors AC Power Cord into a wall outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. 3 Press the power ON-OFF button on the Remote Control Unit or on the
Inhaltszusammenfassung zur Seite Nr. 20
BASIC OPERATION ZOOM ADJUSTMENT Turn the ZOOM RING to adjust the projected picture size. Turn the ring to WIDE direction to make the image larger, and turn to TELE direction to make the image smaller. FOCUS ADJUSTMENT Turn the FOCUS RING to adjust the projected picture focus. KEYSTONE ADJUSTMENT If the picture has keystone distortion, correct image with KEYSTONE adjustment. 1 Press the KEYSTONE !!!!/"""" button on the Remo
