Inhaltszusammenfassung zur Seite Nr. 1
COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
AV-21M335
Remote control buttons and basic functions .............................. 4
AV-21M315
TV buttons and functions ........................................................... 6
AV-21V315
Setting up your TV ..................................................................... 7
Basic setting for picture................................
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 7 If you are not going to use this TV for a long period of time, be sure to EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. disconnect the AC plug from the AC socket. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE 8 The apparatus shall not be exposed to dripping or splashing and that FOLLOWING RULES
Inhaltszusammenfassung zur Seite Nr. 3
Knowing your TV’s features Main features DVD FUNCTION Just connect DVD player to the television. The television will detect DVD signal and display picture on the screen automatically and you can adjust pictures and sound while you are watching DVD as your desire. FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press. EXIT AI ECO TV detects the brightness of your room and automatically adjust the picture brightness to a suitable level for a better eye
Inhaltszusammenfassung zur Seite Nr. 4
Remote control buttons and basic functions No. Press To 1 POWER Turn on or off the TV from standby mode. 1 2 MENU/OK Display menu and confirm selected function. " 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 8 6 EXIT 5 VOLUME -/+ Adjust the volume level. 3 6 TV/VIDEO Select TV or video terminal input. 2 7 EXIT On the other hand, you can use this button to EXIT from the menu. 7 MUTING Turn off the volume. Press this button again to resume the v
Inhaltszusammenfassung zur Seite Nr. 5
Remote control buttons and basic functions (continued) How to operate menus and menus locations Top menu 2nd menu Location 3rd menu Location To Operation Note MENU PICTURE PICTURE MODE P.9 – – PICTURE SETTING P.10 CONTRAST P.10 Display the MENU Press the MENU/OK button 2. To exit the MENU, press the DISPLAY/ BRIGHT P.10 BACK button 8 or SHARP P.10 choose EXIT menu COLOUR P.10 or TV/VIDEO/EXIT TINT P.10 button 6. WHITE BALANCE P.10 – – Display the top Press 5/∞ buttons 3 to choose a Press ∞ butto
Inhaltszusammenfassung zur Seite Nr. 6
V N I V E 3 I 3 L / MONO R CHAN EL VOLUME N ( ID O- ) V L / MONO R IN (V DEO- ) TV buttons and functions The illustrations shown below is for AV-25V315 and AV-21M335 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. No. Button/terminal Description Page Front of the TV 1 L (main power) Press to turn on or turn off the TV’s main power. – 2 POWER lamp Indicate the TV is being turned on or off. – AV-25V315 No colour : TV’s main power is being turned
Inhaltszusammenfassung zur Seite Nr. 7
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial cable. 2 Connecting the compatible main plug to the AC outlet. (1) VHF/UHF outdoor aerial Matching aerial adapter (supplied) (2) (3) 75-ohm coaxial cable (not supplied) 3 Inserting batteries into the remote control. Insert two batteries by following the + and - polarities and inserting the - end first. If you connect a VCR, connect the aerial output jack of your VCR CAUTION: and the ae
Inhaltszusammenfassung zur Seite Nr. 8
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: LANGUAGE AUTO PROGRAM EDIT AUTO PROGRAM ENGLISH PR CH/CC AV Vieät CC 12 1 CH 04 22% SETUP TOUR RESTART? 2 CH 76 3 CH 78 4 CH 05 5 CH 28 3 MENU : OK MENU : OK 6 CH 10 DISPLAY : BACK TV/VIDEO : EXIT MENU : OK INSERT :
Inhaltszusammenfassung zur Seite Nr. 9
Basic setting for picture COLOUR SYSTEM PICTURE MODE You can select the appropriate colour system when the picture is You can choose the desired picture setting with one-touch. not clear or no colour appears. Press the PICTURE MODE button to select a setting. Press the COLOUR SYSTEM button to select a setting. SOFT Softens contrast and sharpness. BRIGHT Heightens contrast and sharpness. AUTO PAL SECAM NTSC3.58 STANDARD Standard picture setting. USER You can change this picture
Inhaltszusammenfassung zur Seite Nr. 10
Basic setting for picture (continued) PICTURE SETTING WHITE BALANCE You can adjust the desired picture setting when selecting USER You can change the white balance of the picture to better match in PICTURE MODE. the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose 1 Select the USER in PICTURE MODE under PICTURE menu. ❇ the desired setting. PICTURE menu MENU PICTURE MODE ❇ USER MENU PICTURE menu WHITE BALANCE 2 Select the PICTURE SETTING in PICTURE menu, then
Inhaltszusammenfassung zur Seite Nr. 11
Advanced setting for picture AI ECO SENSOR (ECO) BLUE BACK You can adjust TV screen contrast according to the brightness of You can set the TV to automatically change to a blue screen and your room. mute the sound if the signal is weak or absent, or when there is Press the ECO button to select the desired mode. no input from an antenna. OFF Cancel the function. Select the BLUE BACK in the INSTALL menu, then choose ON or MODE-1 Mild contrast (recommended). OFF. MODE-2 Even contrast. ❇ MENU INSTAL
Inhaltszusammenfassung zur Seite Nr. 12
Basic setting for sound SOUND SYSTEM SOUND MODE You can select an appropriate sound system when abnormal You can choose the desired sound setting. sound occurs even when the picture appears normally. Select the SOUND MODE in SOUND menu, then choose the Press the SOUND SYSTEM button to select a setting. setting. ❇ MENU SOUND menu SOUND MODE B/G I D/K M USER You can change this sound setting as you like. This function is not available in video mode. Select USER and adjust the fre
Inhaltszusammenfassung zur Seite Nr. 13
Advanced setting for sound CINEMA SURROUND EQUALIZER You can enjoy an enhanced sound for wider audience. You can adjust the sound level of each frequencies when selecting Press the CINEMA SURROUND button to select a setting. USER mode in SOUND MODE. OFF Cancel the function. 1 Select the USER in SOUND MODE under SOUND menu. ❇ ON Listen to sound with wider audience effect. MENU SOUND menu SOUND MODE USER This function is not available when the SOUND MODE is set to 2 Select the EQUALIZER in SOUND m
Inhaltszusammenfassung zur Seite Nr. 14
DVD function AUTO SIGNAL DETECT WHITE BALANCE You can change the white balance of the DVD picture. When the DVD input signal is detected. The input mode will be Select the WHITE BALANCE in DVD MENU under FEATURES menu, changed to VIDEO-2 automatically. then choose the desired setting. For The DVD player, press the “POWER ON” button of the ❇ FEATURES menu DVD MENU MENU machine so that the signal can be detected. WHITE BALANCE For the VCR, press the “POWER ON” button of the machine, and then press
Inhaltszusammenfassung zur Seite Nr. 15
Customized setting OFF TIMER VNR You can set the TV to turn off automatically to standby mode after You can reduce the picture noise. a set time. Select the VNR in the PICTURE menu, then choose a setting of Press the OFF TIMER button to select a desired period of time. VNR function. OFF TIMER ❇ MENU PICTURE menu VNR 0 120 You can set the period of time OFF VNR is turned off. 20 to a maximum of 120 minutes AUTO Effect of VNR is automatically controlled. in 10 minutes step. MIN Effect of VNR becom
Inhaltszusammenfassung zur Seite Nr. 16
Customized setting (continued) DISPLAY VIDEO-2 SETTING You can display the programme number, video terminal number You can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 and PR list on the screen. terminal. Press the DISPLAY button to select the desired mode: Select the VIDEO-2 SETTING in INSTALL menu, then choose a ON OFF PR LIST setting (Factory setting is COMPONENT). ❇ Choose a TV channel or a VIDEO terminal. ME
Inhaltszusammenfassung zur Seite Nr. 17
TV channel presetting 2 Choose EDIT/MANUAL, then press the MENU/OK button. To register the TV channels automatically EDIT menu appears. (AUTO PROGRAM) EDIT You can register the TV channels into the TV’s channel list PR CH/CC automatically. AV 1 CH 04 2 CH 76 1 Display the INSTALL menu. 3 CH 78 4 CH 05 ❇ MENU INSTALL menu 5 CH 28 3 6 CH 10 2 Choose AUTO PROGRAM, then press the MENU/OK button. MENU : OK I
Inhaltszusammenfassung zur Seite Nr. 18
TV channel presetting (continued) To edit the channel list (PR LIST) To add in the new channel (MOVE and DELETE in the EDIT menu) (INSERT in the EDIT menu) You can edit the TV channel list as you like. You can add in the new channel in the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be You need to find the “CH/CC” number for the TV channel. Find the changed. “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “
Inhaltszusammenfassung zur Seite Nr. 19
TV channel presetting (continued) CH US CCIR OIRT AUSTRALIA CC US CCIR OIRT AUSTRALIA CH/CC number CH 33 US-33, W+48 E33 AU-34 CC 18 E S-18 CH 34 US-34, W+49 E34 AU-35 CC 19 F S-19 When you want to use the INSERT CH 35 US-35, W+50 E35 AU-36 CC 20 G S-20 CH 36 US-36, W+51 E36 AU-37 CC 21 H S-21 function on page 18, find the CH/CC CH 37 US-37, W+52 E37 AU-38 CC 22 I S-22 CH 38 US-38, W+53 E38 AU-39/AU-40 CC 23 J S-23 number corresponding to the channel CH 39 US-39, W+54 E39 AU-41 CC 24 K S-24 CH 4
Inhaltszusammenfassung zur Seite Nr. 20
V L / MONO R IN (VIDEO-3) V L / MONO R IN (VIDEO-3) Additional preparation The illustrations shown in this section are for AV-25V315 and Connecting to rear component/video input AV-21M335 only, which are used for explanation purpose. Your terminal and output terminal TV may not look exactly the same as illustrated. Rear of TV Before connecting AV-25V315 • Read the manuals provided with the devices for the proper VCR (for playing) COMPONENT VIDEO-1 (VIDEO-2) OUTPUT DVD player (composite signals
