Bedienungsanleitung Panasonic CT-32SX31UE

Bedienungsanleitung für das Gerät Panasonic CT-32SX31UE

Gerät: Panasonic CT-32SX31UE
Kategorie: CRT-Fernseher
Produzent: Panasonic
Größe: 4.5 MB
Datum des Hinzufügens: 1/18/2014
Seitenanzahl: 31
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Panasonic CT-32SX31UE zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Panasonic CT-32SX31UE finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Panasonic CT-32SX31UE auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Panasonic CT-32SX31UE im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Panasonic CT-32SX31UE auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Panasonic CT-32SX31UE Handbuch - Online PDF
Advertisement
« Page 1 of 31 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Panasonic CT-32SX31UE Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Panasonic CT-32SX31UE befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

ORDER NO. MTNC010524C1
B5
Service Manual
Color Television
Main Manual
(NA8ML)
Panasonic
Models
Chassis
CT-32SX31E BP371
CT-32SX31UE BP371
CT-32SX31CE BP371
CT-36SX31E BP372
CT-36SX31UE BP372
CT-36SX31CE BP372
This Service manual is issued as a service guide for the models of the NA8ML family listed above. Included in this
manual are a set of schematic, block diagrams, functional descriptions, alignment procedures, disassembly
procedures and a complete parts list.
“WARNING! This Service Manual is

Inhaltszusammenfassung zur Seite Nr. 2

Important Safety Notice Special components are used in this television set which are important for safety. These parts are identified on the schematic diagram by the symbol and printed in BOLD TYPE on the replacement part list. It is essential that these critical parts are replaced with the manufacturer’s specified replacement part to prevent X-ray radiation, shock, fire or other hazards. Do not modify the original design without the manufacturer’s permission. Safety Precautions General Guideli

Inhaltszusammenfassung zur Seite Nr. 3

Important Safety Notice . . . . . . . . . . . . . . . . . . 2 Instructional Flow Chart for Serviceman Mode . . . . . . . . . . . . . . . . . . . 24 Safety Precautions . . . . . . . . . . . . . . . . . 2 Service Adjustments General Guidelines. . . . . . . . . . . . . . . . . 2 (Electronic Controls). . . . . . . . . . . . . . . . . 27 Leakage Current Cold Check . . . . . . . . . 2 X-ray Radiation. . . . . . . . . . . . . . . . . . . . 2 Sub-Contrast Adjustment . . . . . . . . . . . 27 Horizontal O

Inhaltszusammenfassung zur Seite Nr. 4

Service Notes Note: These components are affixed with glue. Be careful not to break or damage any foil under the component or at the pins of the ICs when removing. Usually applying heat to the component for a short time while twisting with tweezers will break the component loose. Leadless Chip Component How to Replace Flat-IC - Required Tools - (surface mount) Chip components must be replaced with identical chips • Soldering iron • De-solder braids due to critical foil track spacing. There are n

Inhaltszusammenfassung zur Seite Nr. 5

Service Notes (Continued) IMPORTANT: To protect against possible damage to Preparation the solid state devices due to arcing or static 1. Connect Receiver to AC 120 Volts. Do not turn ON. discharge, make certain that all ground wires and CTR 2. Connect HIGH VOLTAGE meter to 2nd anode DAG wire are securely connected. (H.V. button). Note: Use cold ground( ) for negative lead. CAUTION: The power supply circuit is above earth 3. Connect the ammeter serial from the flyback anode ground and the chassi

Inhaltszusammenfassung zur Seite Nr. 6

Receiver Feature Table FEATURE\MODEL CT-32SX31E/UE/CE CT-36SX31E/UE/CE Chassis NA8ML Tunning system 96K # of channels 181 Menu language Eng/Span/Fr Closed Caption X V-Chip (USA/CANADA) X 2RF X Remote Model # EUR511500 Picture tube AMEC Comb Filter 3 DIG VM X V/A norm X Color Temp X MTS/SAP/DBX X BASS/BL/TRE Control X AI Sound X Surround X SPATIALIZER/BBE BBE Built-in audio power 10W/CH (10%) # of speakers 2 A/V in (rear/front) 3(2/1) S-VHS Input (rear/front) 1/1 Component Input 1 (Y,Pb,Pr) Audio

Inhaltszusammenfassung zur Seite Nr. 7

Location of Controls (Receiver) Front A/V Jacks VOLUME CHANNEL ACTIO TV N /VIDEO POWER Controls Inside Remote Control Sensor front door 2 3 4 5 1 Figure 3. Location of Controls (Receiver). Quick Reference Control Operation Quick Reference Control Operation 1 Power Button - Press to turn ON or OFF. Volume Buttons - Press to adjust Sound Level, or to adjust Audio Menus, Video 2 Menus, and select operating features when menus are displayed Channel Buttons - Press to select programmed chann

Inhaltszusammenfassung zur Seite Nr. 8

Location of Controls (Remote) MULTI Button POWER Button Programmable button that can Press to turn ON and OFF. operate up to seven (7) functions at MUTE Button once Press to mute sound. TV/VIDEO Button A second press resumes sound. Press to select TV or Video input. Press also to access and delete Closed Caption display. CH (channel) Buttons VCR, DVD, LD/CD, AUX, TV, CBL, Press to select channels. DBS, RCVR Use with volume buttons to navigate in menus. Component function buttons DBS EXIT, DBS

Inhaltszusammenfassung zur Seite Nr. 9

Disassembly for Service To release screen GND cables from L-Board L11 & L12 Back Cover connectors, insert a wire in both sides of connector and Remove all the screws marked with an arrow( ) pull upwards the cable, then remove the wire from the back of the Receiver. (See Fig. 6) Note: Screw configuration, type, and number Insert wire of screws vary depending on the Pull cable upwards model of the Receiver serviced and the application; various models are covered in this Manual. Use same hardwa

Inhaltszusammenfassung zur Seite Nr. 10

Disassembly for Service (Continued) Note: To remove the four brackets holding the degauss coil from the corners of Note: Reuse all the clampers and mounting the CRT, first remove the CRT from brackets from the degaussing coil and the cabinet, then remove the Brackets screen, and when remounting the by pressing the tab on the bracket and degaussing coil assure that is not pull upwards. These Brackets are touching the speakers, this can be included in the Degauss Coil Kit, for done by placing some

Inhaltszusammenfassung zur Seite Nr. 11

Back Cover Removal 4 screws at top edge 1 screw by antenna jacks 1 screw 1 screw 1 screw at lower 1 screw 1 screw at lower right corner left corner 1 screw Figure 8. Back Cover Removal - 11 -

Inhaltszusammenfassung zur Seite Nr. 12

D751 + Chassis Service Adjustment Procedures All service adjustments are factory preset and should not require adjustment unless controls and/or associated components are replaced. Note: Connect the (-) lead of the voltmeter to the appropriate ground. Use heat sink when the HOT ground symbol ( ) is used. Otherwise, use COLD ground ( ) — Tuner shield. L826 Q804 A-BOARD D-BOARD Q002 L824 + - IC001 IC881 IC882 IC883 C840 IC002 L008 T801 IC101 Q801 IC2301 IC1801 T T U U N C3023 IC3001 N E - E R Q55

Inhaltszusammenfassung zur Seite Nr. 13

Purity and Convergence Procedure Adjustment is necessary only if the CRT or the Vertical Raster Shift Adjustment (Only for deflection yoke is replaced or if the setting was Models with Purity/Convergence Assembly with 4 disturbed. The complete procedure consists of: Pairs of Rings). 1. Vertical Raster Shift Adjustment. (Only for Models Apply a green pattern with a horizontal line, adjust the with Purity/Convergence Assembly with 4 Pairs Deflection Yoke so that has no tilt, then secure it. of R

Inhaltszusammenfassung zur Seite Nr. 14

Initial Center Static Convergence Final Convergence Procedure (see Fig.17 Connect a dot/cross hatch generator to the Receiver through Fig. 19): and tune in a signal. Observe misconvergence at Note: Vertical size and focus adjustments must be center of the screen only. completed prior to performing the convergence Adjust the R&B pole magnets; by separating tabs and adjustment. Connect a dot pattern generator to the rotating to converge blue with red. Receiver. The Brightness level should not be h

Inhaltszusammenfassung zur Seite Nr. 15

YH Adjustment (VR2 for Vertical dynamic Permalloy Convergence Corrector Strip convergence) (Part No. 0FMK014ZZ) 1. Apply a crosshatch pattern. 2. Adjust contrast and brightness customer controls This strip is used in some sets to match the yoke and CRT for optimum convergence. If the yoke or CRT is to obtain a correct picture. replaced, the strip may not be required. 3. With a driver Adjust VR2 (located in deflection yoke First converge the set without the strip and observe board Fig. 19) to o

Inhaltszusammenfassung zur Seite Nr. 16

As the yoke is tilted G vertically, the rasters R B produced by the outside guns rotate in opposite directions. Figure 17. Vertical Yoke Movement Raster produced from one of the outside electron beams Raster from the other side electron beam RG B Static convergence magnets are set for center convergence As the yoke is tilted horizontally, one raster gets larger while the other gets smaller Figure 18. Horizontal Yoke Movement For Adjustment 2 Poles(Purity) 2 Poles(VRS Adj) of DY (YHC/YV/XV) Dyn

Inhaltszusammenfassung zur Seite Nr. 17

Serviceman Mode (Electronic Controls) This Receiver has electronic technology using the I²C Bus Concept. It performs as a control function and it replaces many mechanical controls. Instead of adjusting mechanical controls individually, many of the control functions are now performed by using “On Screen Display Menu”. (The Serviceman Adjustment Mode.) Note: It is suggested that the technician reads all the way through and understand the following procedure for Entering/Exiting the Serviceman Adju

Inhaltszusammenfassung zur Seite Nr. 18

Press the Power Button on the Remote Control to select the Serviceman Adjustment . For Adjustments: 1.Press Channel Up/Down on the Note: Write Down the original 2.Press Volume Up/Down on the Remote Control to select one of value set (b in Fig. 20) for Remote Control to adjust the the available Service Adjustments each address before level of the selected Service (a in Fig. 20). modifying anything. It is Adjustment (b in Fig. 20). easy to erroneously adjust the wrong item. Default Sub-Data Adjus

Inhaltszusammenfassung zur Seite Nr. 19

Press the Power Button on the Remote Control to select the Serviceman Adjustment For Adjustments: 1.Press Channel Up/Down on the Note: Write Down the original 2.Press Volume Up/Down on the Remote Control to select one of value set (b in Fig. 20) for Remote Control to adjust the the available Service Adjustments each address before level of the selected Service (a in Fig. 20). modifying anything. It is Adjustment (b in Fig. 20). easy to erroneously adjust the wrong item. Default Geometry Adjust

Inhaltszusammenfassung zur Seite Nr. 20

Press the Power Button on the Remote Control to select the Serviceman Adjustment For Adjustments: 1.Press Channel Up/Down on the Note: Write Down the original 2.Press Volume Up/Down on the Remote Control to select one of value set (b in Fig. 20) for Remote Control to adjust the the available Service Adjustments each address before level of the selected Service (a in Fig. 20). modifying anything. It is Adjustment (b in Fig. 20). easy to erroneously adjust the wrong item. Default PIP Adjustment


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Panasonic BT-LH1700WP Handbuch CRT-Fernseher 5
2 Panasonic CT 13R28W Handbuch CRT-Fernseher 4
3 Panasonic Color Television CT-27G24 Handbuch CRT-Fernseher 8
4 Panasonic CT 13R17B Handbuch CRT-Fernseher 8
5 Panasonic CT 20G7D Handbuch CRT-Fernseher 2
6 Panasonic CT 13R18B Handbuch CRT-Fernseher 0
7 Panasonic CT 20SL13 Handbuch CRT-Fernseher 4
8 Panasonic CT 13R38S Handbuch CRT-Fernseher 4
9 Panasonic CT 20SL15 Handbuch CRT-Fernseher 10
10 Panasonic CT 20SX11 Handbuch CRT-Fernseher 1
11 Panasonic CT 20D12D Handbuch CRT-Fernseher 1
12 Panasonic BT-YAE1700G Handbuch CRT-Fernseher 6
13 Panasonic CT 20SX10 Handbuch CRT-Fernseher 2
14 Panasonic CT 24SX11 Handbuch CRT-Fernseher 1
15 Panasonic CT 25G7 Handbuch CRT-Fernseher 2
16 Sony BRAVIA 32EX308 Handbuch CRT-Fernseher 10
17 Sony E42A10 Handbuch CRT-Fernseher 3
18 Sony FD Trinitron KV-21FX20K Handbuch CRT-Fernseher 58
19 Sony BRAVIA KDL-26T30 Handbuch CRT-Fernseher 7
20 Sony BRAVIA 46HX701 Handbuch CRT-Fernseher 4