Bedienungsanleitung Daewoo DTQ 27S2FCV, DTQ 25S2FCV

Bedienungsanleitung für das Gerät Daewoo DTQ 27S2FCV, DTQ 25S2FCV

Gerät: Daewoo DTQ 27S2FCV, DTQ 25S2FCV
Kategorie: CRT-Fernseher
Produzent: Daewoo
Größe: 0.96 MB
Datum des Hinzufügens: 4/6/2013
Seitenanzahl: 32
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Daewoo DTQ 27S2FCV, DTQ 25S2FCV zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Daewoo DTQ 27S2FCV, DTQ 25S2FCV finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Daewoo DTQ 27S2FCV, DTQ 25S2FCV auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Daewoo DTQ 27S2FCV, DTQ 25S2FCV im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Daewoo DTQ 27S2FCV, DTQ 25S2FCV auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Daewoo DTQ 27S2FCV, DTQ 25S2FCV Handbuch - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Daewoo DTQ 27S2FCV, DTQ 25S2FCV Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Daewoo DTQ 27S2FCV, DTQ 25S2FCV befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

INSTRUCTION MANUAL
Color Television
yyy yyy
yyy yyy
DTQ 25S2FCV
DTQ 27S2FCV

Inhaltszusammenfassung zur Seite Nr. 2

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equil

Inhaltszusammenfassung zur Seite Nr. 3

Daewoo Electronics Corporation of America 120 Chubb Avenue, Lyndhurst, NJ 07071 1-800-DAEWOO8 (1-800-323-9668) Fax:201-935-5284 Dear Customer : Daewoo Electronics Corporation of America would like to thank you for choosing this color television receiver. It incorporates a host of features designed to give you excellent perfor- mance for many years to come. We realize that you’re eager to turn it on and begin enjoying the high-quality pictures it delivers just as quickly as possible, but we ask

Inhaltszusammenfassung zur Seite Nr. 4

CONTENTS Table of Contents Important Safeguards 2 Chapter 1: Overview of Your Equipment 4 Your TV's Front Panel 4 Your TV's Back Panel 4 Your Remote Control 5 Installing your remote control batteries 6 Notes 6 Chapter 2: Connecting an Antenna or Cable to Your TV 7 Connecting an Antenna 7 Connecting a Cable System 8 Connecting Other Pieces of Equipment 9 Safety Note 9 Chapter 3: Operating Your TV 10 Turning your TV On 10 Programming Your TV's Channel Memory 10 Changing Channels 11 Changing the Vo

Inhaltszusammenfassung zur Seite Nr. 5

SAFETY IMPORTANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIP- MENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 7 Slots and openings in the cabinet and the back or bottom are provided for ventilation 2 Save these instructions for later use. and to ensure reliable operation of the television equipment; and to protect it 3 Unplug this television equipment from the from overheatin

Inhaltszusammenfassung zur Seite Nr. 6

13 An outside antenna system should not be (f) When the television equipment exhibits located in the vicinity of overhead power a distinct change in performance - this lines or other electric light or power indicates a need for service. circuits, or where it can fall into such 18 When replacement parts are required, be power lines or circuits. When installing an sure the service technician has used outside antenna system, extreme care replacement parts specified by the should be taken to keep fr

Inhaltszusammenfassung zur Seite Nr. 7

CHAPTER 1 Overview of Your Equipment Your TV comes with a remote control. The section below summarizes the buttons, con- trols, and terminals that you will use with your TV. Your TV's Front Panel 1 POWER Use this button to turn your TV on or off. 2 VCHW Use these buttons to change channels on your TV, or to select items in the menu system. 3 CVOLB Use these buttons to change your TV's volume, to activate selections in the menu system, or to change audio and video settings. 4 MENU Use this butt

Inhaltszusammenfassung zur Seite Nr. 8

Your Remote Control 1 POWER Use this button to turn your TV on or off. 2 VCHW Use these buttons to change channels on your TV, or select items in the menu system. 3 CVOLB Use these buttons to change your TV's volume, 1 to activate selections in the menu system, or to change audio and video settings. 4 MENU 2 Use this button to turn the TV's menu system on and off. 3 3 5 RECALL 4 Press this button to display the channel number. 6 ADD/ERA 2 Use this button to add a channel to the TV's memory or er

Inhaltszusammenfassung zur Seite Nr. 9

Installing your remote control batteries 1 Open the battery compartment on the back of the remote control. 2 Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. 1 2 3 Notes Do not mix different types of batteries, or mix an old and a new battery. Remove and replace weak batteries. Weak batteries can leak and damage your con- troller. Dispose of batteries properly; never throw them into a fire. Point your remote

Inhaltszusammenfassung zur Seite Nr. 10

CHAPTER 2 Connecting an Antenna or Cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown below, not all of them. All connections will be made to the antenna terminal on the back of your TV. The anten- na terminal is a silver metal post partially surrounded by two plastic tabs. For help in locati

Inhaltszusammenfassung zur Seite Nr. 11

Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads, you must obtain a combiner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from combiner onto the antenna t

Inhaltszusammenfassung zur Seite Nr. 12

If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4 and change channels using the converter box. If your cable system only requires you to use a converter box for some channels (i. e. pay-TV channels), follow these steps: Find the primary incoming coa

Inhaltszusammenfassung zur Seite Nr. 13

CHAPTER 3 Operating Your TV Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the remote, you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of the available channels. Turning Your TV On 1 To turn your TV on, press the POWER button on the remote 1 control. You can also use the POWER button on the front panel. Make sure your TV is plugged in before you try to turn it on. Programming Your TV's Chann

Inhaltszusammenfassung zur Seite Nr. 14

Changing Channels You can change channels in three ways: 1 The VCHW buttons will take you through all memorized chan- 1 nels, one by one. The VCHW buttons will not access channels that have not been programmed into the TV's memory. For more information about programming channels into memory, see the 2 section “Programming your TV's Channel Memory,” above. 2 The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel, enter its num- ber; the TV

Inhaltszusammenfassung zur Seite Nr. 15

Erasing a channel from memory 1 1 Tune to the channel you want to erase. 2 2 Press the ADD/ERA button on the remote control. The channel will turn from green to magenta to show it has been erased. Changing the TV's channel memory with the menus You can also use the menu system to add or erase channels from memory: 1 Use the number buttons to tune to the channel, then press MENU. 2 Use the VCHW buttons to select SETUP and press CVOLB. 3 Use the VCHW buttons to select EDIT PROGRAM. If the channel

Inhaltszusammenfassung zur Seite Nr. 16

Changing the TV’s Input Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve connected another component to your TV (such as a VCR) using the Audio/Video Inputs, you will want to be able to view the signal from that component. To do this, you will need to switch from the “TV” input to the “Video” input, as follows; 1 With the TV turned on, Press MENU 2 You will see the Main Menu, Use the VCHW buttons to select SETUP and press CVOLB. 3 Use the VCHW buttons

Inhaltszusammenfassung zur Seite Nr. 17

Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1 With the TV on, press the MENU button. 2 Use the VCHW buttons to select PICTURE. 3 Press the CVOLB buttons. The picture menu will appear. 4 The AUTO feature will be selected. Use the CVOLB button to turn AUTO to OFF. This will allow you to manually adjust the video settings. 1 2 3 4 5 Use the VCHW buttons to select the video setti

Inhaltszusammenfassung zur Seite Nr. 18

Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps : 1 Complete steps 1-3 in the “Adjusting Video Settings” section, on the previous page. 2 Press the CVOLB buttons to set the AUTO setting to ON. This will return all video settings to their default levels, as set at the factory. 3 You can also return to the factory settings during normal TV viewing by pressing the AUTO.PICT button on the remote

Inhaltszusammenfassung zur Seite Nr. 19

CHAPTER 4 Setting the Sound Your TV set is capable of decoding a STEREO signal. Changing The Sound Mode 1 With TV turned on, press the MENU button. 2 Use the VCHW buttons to select sound. 3 Press the CVOLB buttons. The SOUND menu will be displayed. 4 Use the VCHW buttons to change the STEREO or MONO setting. 5 Wait 7 seconds, or press MENU twice to exit. 1 2 3 4 02 16 Chapter 4 : Setting the Sound

Inhaltszusammenfassung zur Seite Nr. 20

CHAPTER 5 Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Accessing the Timer Menu 1 With the TV turned on, press the MENU button. 2 Use the VCHW buttons to select TIMER. 3 Press the CVOLB buttons. The TIMER menu will be displayed. 1 2 3 Setting the Clock 1 Follow steps 1-3 in “Accessing the Timer Menu,” above. 2 Press VCHW buttons to select C


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Daewoo 14Q2 Handbuch CRT-Fernseher 30
2 Daewoo 20T1 Handbuch CRT-Fernseher 29
3 Daewoo 20Q2 Handbuch CRT-Fernseher 56
4 Daewoo 20T2 Handbuch CRT-Fernseher 37
5 Daewoo 14Q3 Handbuch CRT-Fernseher 26
6 Daewoo 14T2 Handbuch CRT-Fernseher 1
7 Daewoo 20Q3 Handbuch CRT-Fernseher 4
8 Daewoo 14T1 Handbuch CRT-Fernseher 0
9 Daewoo 20Q1 Handbuch CRT-Fernseher 8
10 Daewoo 21Q1 Handbuch CRT-Fernseher 1
11 Daewoo 21Q2 Handbuch CRT-Fernseher 10
12 Daewoo 21Q4 Handbuch CRT-Fernseher 0
13 Daewoo 21T1 Handbuch CRT-Fernseher 10
14 Daewoo 21T2 Handbuch CRT-Fernseher 12
15 Daewoo CP-885F Handbuch CRT-Fernseher 4
16 Sony BRAVIA 32EX308 Handbuch CRT-Fernseher 10
17 Sony E42A10 Handbuch CRT-Fernseher 3
18 Sony FD Trinitron KV-21FX20K Handbuch CRT-Fernseher 58
19 Sony BRAVIA KDL-26T30 Handbuch CRT-Fernseher 7
20 Sony BRAVIA 46HX701 Handbuch CRT-Fernseher 4