Inhaltszusammenfassung zur Seite Nr. 13
3.1.2 Day & Time Current date & time ：This displays the current date and time of the device. PC clock ：This displays the date and time of the monitoring PC clock. Date & time format ：Click the pulldown box to select among different time display formats, including yyyy-mm-dd hh:mm:ss (year-month-day hour:minute:second), mm-dd-yyyy hh:mm:ss (month-day-year hour:minute:second), and dd-mm-yyyy hh:mm:ss (day-month-year hour:minute:second). Adjust ：Select one of four time adjusting modes.
Inhaltszusammenfassung zur Seite Nr. 14
millisecond of computer clock times in a network of computers. NTP server name：Type the host name or IP address of the NTP server, up to 64 characters. Time zone：Select the time zone and time difference from Greenwich Mean Time in the area where the device is installed from the pulldown box. 3.1.3 Initialize Reboot ：Click this button to reboot the device. A confirmation dialogue will appear. Click OK to proceed. It takes about two minutes to reboot the device. Factory default ：Click th
Inhaltszusammenfassung zur Seite Nr. 15
Note: • Use only upgrade files that are special for this device. Problems may occur otherwise. • Do not turn off the device power or disconnect the network until the upgrading is completed. 12
Inhaltszusammenfassung zur Seite Nr. 16
3.2 Camera 3.2.1 General RTSP: Switch the RTSP streaming On/Off. Note： • RTSP: Real Time Streaming Protocol. RTSP is supported by most of the media clients . (RealPlayer, Media Player, QuickTime, etc…) Deinterlace Filter：Switch the deinterlace filter on/off. Overlay：Select to add Text Overlay or Privacy Mask on/off the display screen. Text Overlay：Enables users to see some information on the display screen, including Date/Time and user-defined text. You can also change the bac
Inhaltszusammenfassung zur Seite Nr. 17
3.2.2 MPEG4 3.2.2.1 Computer View RTSP (If RTSP mode is ON) RTSP port: Specify the transmission port number of RTSP streaming video. Default value is 554. Viewer authentication: If the viewer authentication is ON, users viewing through RTSP will be requested to key-in username and password. RTP (If RTSP mode is ON) Unicast streaming: Unicast streaming Video/Audio port range: Specify the transmission port range of RTP streaming video. RTP will select a port randomly from the rang
Inhaltszusammenfassung zur Seite Nr. 18
MPEG4 viewer port (If RTSP mode is OFF) Unicast streaming Video/Audio port number : Specify the transmission port number of the video data. It is initially set to 8090. Specify an even number from 1024 to 65534. Image Size：Specify the image size the network camera transmits. You can choose among 704 × 480, 352 × 240 and 176 × 120 for NTSC mode and 704 × 576, 352 × 288 and 176 × 144 for PAL mode. Frame rate：Set the frame rate of the MPEG4 image. Selectable values are 5, 10, 15, 20, 25
Inhaltszusammenfassung zur Seite Nr. 19
3.2.2.2 Mobile View RTSP (If RTSP mode is ON) RTSP port: Specify the transmission port number of RTSP streaming video. Default value is 8554. RTP (If RTSP mode is ON) Unicast streaming: Unicast streaming Video/Audio port range: Specify the transmission port range of RTP streaming video. RTP will select a port randomly from the range. Multicast streaming: Multicast address: Specify the multicast server address. Video / Audio Port: Specify the transmission port number of the video
Inhaltszusammenfassung zur Seite Nr. 20
Quality Fixed Bitrate：Set the bit rate of MPEG4 image transmission for a line. Selectable values are 64, 32, and 16kbps.. 17
Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Before you use this Product This Atlantis Land product has been designed with safety in mind. However, if not used properly electrical products can cause fires which may lead to serious body injury. To avoid such accidents, be sure to heed the following. Legal Caution Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. Heed the safety precautions Be sure to fol
Inhaltszusammenfassung zur Seite Nr. 3
Index Installation ........................................................... 2 Using IP Camera via Mobile Phone ................... 2 Using IP Camera via Web Browser ................... 3 1. Initial accessing the IP camera ......................................................................................... 5 2. Configuration of Main Menu ............................................................................................. 6 2.1 Setting .......................................
Inhaltszusammenfassung zur Seite Nr. 4
Installation Installation Steps Follow these steps to install the NetCameraIR Camera on your Ethernet: 1. Check the package contents against the list below. 2. Set the device. See IP Installer User Manual on the available methods. Package Contents Item Description IP Camera IP Camera Power Adapter PoE Injector Accessory Pack Contains accessories for mounting the camera CD User Manual / Software Printed Document Quick Installation Guide Overview Green line: Audio In Pink line:
Inhaltszusammenfassung zur Seite Nr. 5
Using IP Camera via Mobile Phone To use IP cameras via mobile phones, please make sure your RTSP is set to “ON”. (Default is “ON”) To change the settings of IP cameras, please see “Settings” for details. 3G Mobile Phone viewing For 3G mobile phone viewing, type “rtsp://:/video.3gp” into your 3G web browser. is the IP address of your IP camera, is the RTSP port of your IP camera (Default value is 8554.) Example: rtsp://100.10.10.1:8554/video.3gp Note: • Yo
Inhaltszusammenfassung zur Seite Nr. 6
Using IP Camera via Web Browser System Requirement To use the product normally, we strongly recommend your computer follows our minimum system requirement (Computer level lower than this might cause some problems) Item Requirements CPU Pentium 4 1600MHz (or equivalent AMD) Graphic Card 64MB RAM graphic cards (or equivalent on-board graphic cards) RAM 512MB Operating System Windows 98, ME (Please see Note) Windows 2000, 2003, XP, Vista Web Browser Internet Explorer 6 or later Note:
Inhaltszusammenfassung zur Seite Nr. 7
How to Use This chapter introduces how to monitor the image from the device using Microsoft web browser. The Atlantis Land IP camera can be used with Microsoft web browsers and Intelligent IP Installer in Windows operation systems. This document focuses on introducing you to Microsoft web browser. The recommended browser for Windows is Internet Explorer 6.0. If you want to know how to use Atlantis Land IP camera with Intelligent IP Installer, check Intelligent IP Installer User’s Manual in
Inhaltszusammenfassung zur Seite Nr. 8
1. Initial accessing the IP camera 1. Start your web browser, and enter the IP address or host name of the ATLANTIS LAND IP camera in the Location / Address field of your browser. Note： • If you only want to view the video without setting page, enter “http:///index2.htm” as your web URL. 2. Use the default account “admin” and default password “admin”. Note： • The default user name “admin” and the password are set at the factory for the administrator. You can change them in the
Inhaltszusammenfassung zur Seite Nr. 9
2. Configuration of Main Menu Language You can click the pulldown box to select system language, including English, Traditional Chinese, Simplified Chinese, German, Japanese and Spanish. 2.1 Setting This function is only for the Administrator. Click this button to get into the Basic and Advance settings menu. 6
Inhaltszusammenfassung zur Seite Nr. 10
2.2 Client Setting Mode: Click the pulldown box to choose between MPEG4 and MJPEG video compression mode. Note：MJPEG streaming is unavailable if RTSP mode is ON. View Size: Select the desired display image resolution to 640X480 or 320X240. Protocol: Select the transferring protocol from TCP, UDP, HTTP and Multicast. Video Buffer: Turn the Video Buffer function On/Off. The Video Buffer function makes the streaming more smoothly in unsteady network environment, but might cause a lit
Inhaltszusammenfassung zur Seite Nr. 11
1. Click k to d display the digital zoo om in windo ow. 2. Pull the to adjust the digital z zoom rang ge, and it w will be sh howed on the above window. 3. You c can use the e left click of your mo ouse to mo ove the to any w where on th he window.. Audio b buttons： ：S Speakers turned on. ：Speakers tu urned off. ：M Microphone e turned on n. ：M Microphone e turned offf. ： Volume control bar. Note： • It means s the speak kers of you ur compute
Inhaltszusammenfassung zur Seite Nr. 12
Setting 3. Basic Click the “Basic” folder to display the sub folders, including System, Camera, Network, and Security. 3.1 System 3.1.1 Information The Information page provides you with product factory information, including Product name, Firmware version, and Web version. 9
