Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Contents Step 2 : Installing Hardware... ... ... ... ... ... ... ... ...11 Important Safety Instructions Step 3 : Inserting the batteries... ... ... ... ... ... ... ...12 Step 4 : Setting the date and time... ... ... ... ... ... ...13 Basic Safety Precautions... ... ... ... ... ... ... ... ... ... ...3 Step 5 : Inserting a memory card (optional) ... ... ...14 Maintaining Your Camera... ... ... ... ... ... ... ... ... ... ...3 Step 6 : Attaching the neck strap... ... ... ... ...
Inhaltszusammenfassung zur Seite Nr. 3
To use your camera as a WebCam .. .. .. .. .. .. ..26 Appendix A: Technical Specifications Lens... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...27 Sensor... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...27 Focal range... ... ... ... ... ... ... ... ... ... ... ... ... ... ...27 Sensitivity... ... ... ... ... ... ... ... ... ... ... ... ... ... ...27 White balance... ... ... ... ... ... ... ... ... ... ... ... ... ...27 Shutter.
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Instructions Read all safety and operating instructions before using your camera. Basic Safety Precautions Maintaining Your Camera • The Installation CD included with your camera is • If the lens, Liquid Crystal Display (LCD) screen or designed for PC use only. Playing the Installation CD flash light surface is dirty, use a lens brush or soft on a stereo or CD player may cause permanent cloth to wipe it clean. Avoid touching the lens with damage. your fingers.
Inhaltszusammenfassung zur Seite Nr. 5
Copyright • Copyright ownership should be respected at all times, and where applicable, permission should be sought when the use of this camera may violate copyright law. • Where there is a "No Photography" restriction, this camera should not be used to record any live performance, or be used for exhibition, even for personal purposes. • Any transfer of pictures or data must be conducted under the constraints of copyright law. Notes on the LCD Screen • In the rare
Inhaltszusammenfassung zur Seite Nr. 6
Before You Begin Minimum System Package Contents Requirements When using your camera, use a better computer system for optimal performance. For PC computers ® ® • Microsoft Windows XP, Windows 2000, Windows Installation CD Pouch Wrist 2 x AAA Millennium Edition (Me) or Windows 98 Second strap alkaline Edition (SE) batteries ® ® • Genuine Intel Pentium II 166 MHz
Inhaltszusammenfassung zur Seite Nr. 7
1. About Your Camera Front View (1) Shutter button (2) Flash light (3) Lens (4) Lens cover/Power switch (5) Strap holder (6) Battery cover (7) Memory card slot (8) Tripod socket 6
Inhaltszusammenfassung zur Seite Nr. 8
Rear View (1) Macro LED (2) Busy LED (3) Mode display button (4) Mode button (5) Set button (6) Function keys (7) Standard/Macro mode switch (8) USB cover (9) USB port (10) LCD screen 7
Inhaltszusammenfassung zur Seite Nr. 9
About Your Camera’s Controls Mode display button LEDs To change the LCD screen display, press the Mode display button. The LCD screen displays available are: The LEDs located on your camera are described in • Standard Display detail below: • Full Display • Image Only Macro LED Busy LED • LCD Monitor Off • Operation Settings Only Mode button To select a mode, press and hold the Mode button for at least two seconds. The modes available are: • Play mode
Inhaltszusammenfassung zur Seite Nr. 10
SET button LCD screen icons To select a menu option, press the Set button. In Record mode, the Set button is also the Flash button. Function keys Use the Function keys to select menu options. Standard/Macro switch To select Standard or Macro mode in Record and Movie mode, move the Standard/Macro switch upwards or downwards as shown below. In Macro mode, the Macro LED lights up green. (1) Image resolution (2) Image quality Standard mode (3) Current working mod
Inhaltszusammenfassung zur Seite Nr. 11
2. To turn off the camera, gently slide the lens Shutter button cover to the right. Your camera has a 2-step shutter function. Notes: To automatically focus on your subject, press and hold • When the camera is turned on, the Busy LED blinks the Shutter button down halfway. The "[ ]" icon red and the last recorded image appears on the LCD appears on the LCD. screen. • If there is no activity on the camera for To take a picture, press the Shutter button down f
Inhaltszusammenfassung zur Seite Nr. 12
2. Installing Your Camera Step 1: Installing drivers and Step 2: Installing hardware software 1. Slide the lens cover to the left to turn on your DO NOT connect the camera to your computer camera. yet! 2. Press and hold the Mode button until the Mode menu appears on the LCD screen. 1. Do not connect the camera to your computer 3. Use the Function keys to select the PC Mode before installing the drivers. If you accidentally begin installation with your icon.
Inhaltszusammenfassung zur Seite Nr. 13
Step 3: Inserting the batteries Notes: 1. Disconnect and turn off your camera. • If the remaining battery power icon on the LCD 2. Gently slide open the battery cover. screen displays one bar, your camera’s flash light is disabled. For more information on your LCD screen’s a. icons, see “LCD screen icons” on page 9. • If your batteries are depleted, the remaining battery power icon turns red and your camera is turned off. • Your camera’s date and time is stored for
Inhaltszusammenfassung zur Seite Nr. 14
Step 4: Setting the date and time 1. Press and hold the Mode button until the Mode 7. Use the Function keys to adjust the date, and menu appears on the LCD screen. then press the Mode display button. The 2. Use the Function keys to select the Setup following LCD screen appears. Mode icon. 3. Press the Set button. The following LCD screen appears.| 8. Use the Function keys to adjust the time, and then press the Mode display button. 9. Press the Set
Inhaltszusammenfassung zur Seite Nr. 15
Step 5: Inserting a memory card (optional) • To avoid permanent damage, do not remove the memory card when your camera is turned on. 1. Make sure that your camera is turned off. • Do not force the memory card into the memory card 2. Insert a memory card (available separately) into slot. If it does not fit properly, gently remove it and your camera’s memory card slot. try again. • If your camera does not detect the memory card, gently wipe the memory card’s met
Inhaltszusammenfassung zur Seite Nr. 16
Step 6: Attaching the neck strap (optional) 1. Insert the thin end of the neck strap into your 3. Pull the neck strap tightly. camera’s strap holder. 2. Make a loop with the other end of the neck strap. 15
Inhaltszusammenfassung zur Seite Nr. 17
3. Using the Modes Play Mode To delete a photo In Play mode, you can delete photos, view photos as a slideshow and print photos. In Play mode, the icons 1. In Play mode, use the Function keys to go to below are displayed on your LCD. the photo that you want to delete. 2. Press the Set button. The following LCD screen appears. 3. Use the Function key to select Delete One and press the Set button. The following LCD screen
Inhaltszusammenfassung zur Seite Nr. 18
To delete all photos To view all photos as a slideshow 1. In Play mode, press the Set button. The 1. In Play mode, press the Set button. The following LCD screen appears. following LCD screen appears. 2. Use the Function key to select Delete 2. Use the Function key to select Auto Play All and press the Set button. The following LCD and press the Set button. The following LCD screen appears. screen appears. 3. Use the Function keys to select OK and press 3.
Inhaltszusammenfassung zur Seite Nr. 19
To print photos using Digital Print Order Format (DPOF) Settings With DPOF, you can print all or one photo, with or without the date. 6. Use the Function keys to select On and if you do Note: not want the date to appear on your printed • If your memory card is not inserted into your camera, photo, select Off. DPOF is disabled, even if there are photos in your 7. Press the Set button. camera’s internal memory. 8. Use the Function key to select Select One. The follo
Inhaltszusammenfassung zur Seite Nr. 20
To print all photos 1. Make sure that your camera is connected to your 5. Use the Function keys to select On and if you do computer’s USB port and that your printer is not want the date to appear on your printed functioning properly. photo, select Off. 2. In Play mode, press the Set button. The 6. Press the Set button. following LCD screen appears. 7. Use the Function key to select Select All/None. The following LCD screen appears. 3. Press the Function key. The f
