Inhaltszusammenfassung zur Seite Nr. 1
®
A Division of Cisco Systems, Inc.
GHz
2.4
802.11b
Wireless-B
Internet Video Camera
User Guide
WIRELESS
Model No.
WVC11B
Inhaltszusammenfassung zur Seite Nr. 2
Wireless-B Internet Video Camera Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2003 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. How to Use this Guide Your guide to the Wireless-B Internet Video Camera has been designed to
Inhaltszusammenfassung zur Seite Nr. 3
Wireless-B Internet Video Camera Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in this Guide? 2 Chapter 2: Planning Your Wireless Network 4 Introduction 4 Ad-Hoc and Infrastructure Modes 4 Network Layout 4 Chapter 3: Getting to Know the Wireless-B Internet Video Camera 6 Camera LEDs 6 Camera Head 6 Camera Ports 7 Chapter 4: Connecting the Wireless-B Internet Video Camera for Setup 8 Overview 8 Connection to a Wired Network for Setup 8 Connection to a Wireless Ad-Hoc Network for Se
Inhaltszusammenfassung zur Seite Nr. 4
Wireless-B Internet Video Camera View Video 40 Setup 41 Help 52 Appendix A: Troubleshooting 54 Common Problems and Solutions 54 Frequently Asked Questions 56 Appendix B: Wireless Security 58 A Brief Overview 58 What Are The Risks? 58 Appendix C: Upgrading Firmware 65 Appendix D: Windows Help 66 Appendix E: Glossary 67 Appendix F: Specifications 73 Appendix G: Warranty Information 74 Appendix H: Regulatory Information 75 Appendix I: Contact Information 80
Inhaltszusammenfassung zur Seite Nr. 5
Wireless-B Internet Video Camera List of Figures Figure 3-1: Camera LEDs 6 Figure 3-2: Camera Head 6 Figure 3-3: Camera Ports 7 Figure 4-1: Connect the Ethernet Network Cable 8 Figure 4-2: Connect the Power Adapter 8 Figure 5-1: Welcome 10 Figure 5-2: Connection for Setup 10 Figure 5-3: Cameras Found 11 Figure 5-4: Administrator Name and Password 11 Figure 5-5: Basic Settings 11 Figure 5-6: DHCP or Static IP Address 12 Figure 5-7: IP Settings 12 Figure 5-8: Mode Settings 13 Figure 5-9: Basic Set
Inhaltszusammenfassung zur Seite Nr. 6
Wireless-B Internet Video Camera Figure 6-9: Find Camera from LAN 20 Figure 6-10: Find Camera from Internet 21 Figure 6-11: Change Settings 21 Figure 6-12: Delete Camera 22 Figure 6-13: View Video 23 Figure 6-14: Recording Icon 23 Figure 6-15: Scheduled Recordings in Progress 24 Figure 6-16: Files 24 Figure 6-17: Preferences 25 Figure 6-18: Recording Schedule 25 Figure 6-19: Add to Recording Schedule 26 Figure 6-20: Modify Scheduled Recording 26 Figure 6-21: Stop Scheduled Recording 27 Figure 6-
Inhaltszusammenfassung zur Seite Nr. 7
Wireless-B Internet Video Camera Figure 7-17: Create Links 36 Figure 7-18: Successful Registration 36 Figure 7-19: Account Confirmation of Camera 37 Figure 7-20: Successful Setup 37 Figure 7-21: Port Forwarding Information 38 Figure 7-22: Web-based Utility Welcome 38 Figure 7-23: User Name and Password 38 Figure 7-24: SoloLink DDNS 39 Figure 8-1: Camera’s Default IP Address 40 Figure 8-2: Web-based Utility Welcome 40 Figure 8-3: Security Warning 41 Figure 8-4: User Name and Password 41 Figure 8-
Inhaltszusammenfassung zur Seite Nr. 8
Wireless-B Internet Video Camera Chapter 1: Introduction Welcome Thank you for choosing the Linksys Wireless-B Internet Video Camera. This Camera sends live video through the Internet to a web browser anywhere in the world! This compact, self-contained unit lets you keep an eye on your home, your kids, your workplace—whatever’s important to you. How does the Camera do all of this? Unlike standard “web cams” that require an attached PC, the Internet Video Camera contains its own web server, so
Inhaltszusammenfassung zur Seite Nr. 9
Wireless-B Internet Video Camera What’s in this Guide? This user guide covers the steps for setting up and using the Wireless-B Internet Video Camera. Chapter 1: Introduction This chapter describes the Camera’s applications and this User Guide. Chapter 2: Planning Your Wireless Network This chapter discusses a few of the basics about wireless networking. Chapter 3: Getting to Know the Wireless-B Internet Video Camera This chapter describes the physical features of the Camera. Chapter 4:
Inhaltszusammenfassung zur Seite Nr. 10
Wireless-B Internet Video Camera Appendix C: Upgrading Firmware This appendix explains how you can upgrade the Camera’s firmware. Appendix D: Windows Help This appendix describes how you can use Windows Help for instructions about networking, such as installing the TCP/IP protocol. Appendix E: Glossary This appendix gives a brief glossary of terms frequently used in networking. Appendix F: Specifications This appendix provides the technical specifications for the Camera. Appendix G: W
Inhaltszusammenfassung zur Seite Nr. 11
Wireless-B Internet Video Camera Chapter 2: Planning Your Wireless Network Introduction A wireless local area network (WLAN) is exactly like a regular local area network (LAN), except that each LAN (Local Area Network): the computer in the WLAN uses a wireless device to connect to the network. Computers and other devices, such as computers and networking products peripherals, in a WLAN share the same frequency channel and SSID, which is an identification name for wireless that make up the n
Inhaltszusammenfassung zur Seite Nr. 12
Wireless-B Internet Video Camera Camera will also communicate with network adapters, such as the Wireless-B and Wireless-G Network Adapters (model numbers WPC11 and WPC54G) for your laptop computers, Wireless-B and Wireless-G PCI Adapters (model numbers WMP11 and WMP54G) for your desktop PCs, and Wireless-B USB Adapter (model number WUSB11) for your computer when you want to enjoy USB connectivity. With these, and many other Linksys products, your networking options are limitless. Go to the L
Inhaltszusammenfassung zur Seite Nr. 13
Wireless-B Internet Video Camera Chapter 3: Getting to Know the Wireless-B Internet Video Camera Camera LEDs The Camera has four LEDs to let you know how the Camera is functioning. Figure 3-1: Camera LEDs Ready Green. The Ready LED lights up when the Camera is powered on. It flashes while the Camera is initializing and is steadily lit when the Camera is ready for use. Act/Link Green. The Act/Link LED flashes when there is activity. LAN Green. The LAN LED lights up when there is a connection
Inhaltszusammenfassung zur Seite Nr. 14
Wireless-B Internet Video Camera Camera Ports Figure 3-3: Camera Ports The Camera features two ports and a Reset button on the bottom panel. Power The Power port is where you will connect the power adapter. LAN The LAN port is where you will connect the Ethernet network cable. (Reset) The Reset button is what you will press if you need to reset the Camera. Insert a paper clip Important: Resetting the Camera will erase all into the opening next to the LAN port. Then press the button and hold it
Inhaltszusammenfassung zur Seite Nr. 15
Wireless-B Internet Video Camera Chapter 4: Connecting the Wireless-B Internet Video Camera for Setup Overview Before you set up the Camera, connect it to a wired or wireless network. Proceed to the appropriate section for your setup. If you need to move the Camera from a wired network to a wireless network, or vice versa, go to this section, “Moving the Camera to a Different Network.” Connection to a Wired Network for Setup 1. Connect the Ethernet network cable to your router or switch. If y
Inhaltszusammenfassung zur Seite Nr. 16
Wireless-B Internet Video Camera 3. Plug the power adapter into an electrical outlet. The Camera’s Ready LED flashes while the Camera is initializing. The Camera is ready for use when the Ready and Wireless LEDs are solidly lit. Proceed to “Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera.” Moving the Camera to a Different Network When you move the Camera from a wired network to a wireless network, or vice versa, you must power off the Camera before connecting to the new
Inhaltszusammenfassung zur Seite Nr. 17
Wireless-B Internet Video Camera Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera Setup Wizard The Wireless-B Internet Video Camera Setup Wizard will guide you through the installation and configuration procedure. 1. Insert the Setup CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the Welcome screen should appear. If it does not, click the Start button and choose Run. In the field provided, enter D:\wvc11b.exe (if “D” is the letter of your
Inhaltszusammenfassung zur Seite Nr. 18
Wireless-B Internet Video Camera 4. The screen shown in Figure 5-3 displays a list of Wireless-B Internet Video Cameras on your network, along with the status information for the Camera whose name is highlighted. In the Selection box, click the name of the Camera you are currently installing. Write down the IP address of the Camera, so you can use it to access the Web-based Utility later. Click the Next button. 5. For security purposes, you will be asked to enter a name and password in order
Inhaltszusammenfassung zur Seite Nr. 19
Wireless-B Internet Video Camera 7. If your network has a DHCP server, such as a router with DHCP enabled, click the Automatic Configuration- DHCP radio button. If you need to assign a static IP address to the Camera, keep the default setting, Static IP address. Then click the Next button. 8. If you selected Automatic Configuration-DHCP in step 7, then proceed to step 9. If you selected Static IP Address, then the IP Settings screen will appear. Enter an IP Address, Subnet Mask, and Default Ga
Inhaltszusammenfassung zur Seite Nr. 20
Wireless-B Internet Video Camera 9. The Mode Settings screen will appear. Click the Infrastructure radio button if you want the Camera to communicate using an access point or wireless router. Click the Ad-Hoc radio button if you want the Camera to communicate without using an access point or wireless router. Click the Next button. 10. The Basic Settings screen will appear, so you can change the wireless settings. Enter your wireless network’s SSID or network name. If you chose Ad-Hoc mode, se
