Inhaltszusammenfassung zur Seite Nr. 1
Wired / Wireless IR IP Camera
ICA-108 / ICA-108W
Quick Installation Guide
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Chapter 1. Introduction ................................................................................... 3 1.1 Before Installation ................................................................................. 3 1.2 System Requirements .......................................................................... 3 1.3 Package Content ................................................................................... 3 Chapter 2. Physical Installation ..................
Inhaltszusammenfassung zur Seite Nr. 3
Chapter 1. Introduction Thank you for purchasing the ICA-108/ICA-108W. It is versatile and high image solution of surveillance application for day and night. The ICA-108/ICA-108W is also a stand-alone camera system with a built-in processor and web server that provides highest quality video and system performance. 1.1 Before Installation Before installation, please be sure to read this quick installation guide and user’s manual (CD) carefully to complete machine installation. 1.2 System Req
Inhaltszusammenfassung zur Seite Nr. 4
Chapter 2. Physical Installation 1. Connect an Ethernet cable Connect the LAN cable on the ICA-108/ICA-108W to the network device (hub or switch). 2. Attach the antenna (ICA-108W only) Finds antenna in accessory and attaches the antenna to the ICA-108W SMA connector. 3. Check the LED (Front Panel) The LED is defined to identify LAN/WLAN connection type. When LAN port is connected, the LED will be green. For WLAN model, if LAN ported is connected, the LED will be green; if LAN cable is
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 3. IP Wizard This chapter shows how to quick set up your ICA-108/ICA-108W. The ICA-108/ICA- 108W is with the default settings. However to help you find the networked camera quickly the windows utility-IP Wizard can search the cameras in the network that shall help you to configure some basic setting before you started advanced management and monitoring. 3.1 Installation In the installation steps below, this guide use ICA-108 as the example. However, the steps for ICA-108W are simila
Inhaltszusammenfassung zur Seite Nr. 6
4. Please click “Next” to install with original settings, or you may click “Change…” button to modify the install folder then press “Next” to continue. 5. Please click “Install” to start the installation.
Inhaltszusammenfassung zur Seite Nr. 7
6. Please click “Finish” to complete the installation 7. Please double-click the utility icon on the desktop then you will see the ICA-108 utility. 8. Press “Search” button. IP Wizard will list all IP Cameras in your LAN environ- ment:
Inhaltszusammenfassung zur Seite Nr. 8
3.2 Wizard function Please select your ICA-108 and press “Wizard”. The utility featured of “Wizard” function to help user to initial ICA-108. User can setup IP address, username and password step by step. Note Please enter User Name and Password. Default Username is: admin, leave password blank. Then click “Submit”.
Inhaltszusammenfassung zur Seite Nr. 9
3.3 Username and Password You may change the ID and assign a new password to your ICA-108 or keep the original and press “Next” to continue. As below, you can select “Static IP” and enter the IP settings. Or select “DHCP ON” when there is a DHCP server in your network. If no IP address is assigned after 30 seconds, ICA-108/ICA-108W will use its default address 192.168.0.20. Note User may open the web browser, and key in the IP address (for example: http://192.168.0.20, the default IP addres
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 4. Cam Viewer Installation This chapter will guide you to install the central management software. The ICA- 108/ICA-108W can be managed through its web interface. However, to central control, manage or record the cameras installed in the network Cam Viewer, the windows-based central management software are required. The Cam Viewer Pro 30 days trial version installation steps are similar. Below is the installation of Cam Viewer Lite. Note 1. Insert the bundled CD disk into the CD-ROM d
Inhaltszusammenfassung zur Seite Nr. 11
3. The welcome screen will display on the screen, please click “Next”. 4. Please read the license agreement and then check “I accept the terms of the license agreement” if you are agreed and click “Next” to continue the installation 11
Inhaltszusammenfassung zur Seite Nr. 12
5. Please key in user name and company name for which you want and click “Next” to continue installation. 6. Check the option “Complete” – all program features will be installed (Requires the most disk space) and click “Next” to continue installation. 12
Inhaltszusammenfassung zur Seite Nr. 13
7. “Ready to Install the Program” will appear to prompt you to start the installation. Please click “Install” to start. 8. Please click “No” to finish the Cam Viewer Lite installation. In above step, when Cam Viewer works with MBM5 (Motherboard Monitor 5), Cam Viewer will display CPU temperature and fan speed. Please click “Yes” if you need this function and refer to the Note manual of Cam Viewer CD disk for complete installation. Now, you can central manage all the ICA-108/ICA-108W install
Inhaltszusammenfassung zur Seite Nr. 14
Appendix A: Feature Listing for Cam Viewer Cam Viewer Lite Cam Viewer Pro Software Version (Free Bundle version) (30-day Trial version)* IP Camera Input 32 16 / 32 / 64 Dual Monitor - V Smart Guard - V I/O Device V V Hotline - V Address Book - V Unusual event Unusual event Log Viewer System log System log Counting application Counting Application - 2 way counting Remote Playback Server - Unlimited Concurrent Playback 1 Channel 16 Channels Counting Function - V General Motion Missing Object Smar
Inhaltszusammenfassung zur Seite Nr. 15
Appendix B: Suggest Hardware / System Requirement Total FPS ~600 600~480 480~240 240~120 120~ Intel Core Intel Core Intel Intel P4 Intel P4 CPU 2 Duo 2 Duo Pentium D 3.0 GHz 2.8 GHz QX6800 E6600 930 RAM 4 GB 2 GB 2 GB 1 GB 1 GB Chipset of Intel 946 or 965 chip, Intel Chipset recommended Motherboard ATI Radeon 9200, nVIDIA GeForce FX-5200, VGA Card Intel 945/965 or above Ethernet 100 Base-TX or Above, Gigabit LAN recommended Hard Disk 160 GB or above O.S. Windows 2000 / XP / 2003 Total FPS:
Inhaltszusammenfassung zur Seite Nr. 16
This page is intentionally left blank
