Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Table of Contents Overview.......................................................................................................................................................3 Read before use ......................................................................................................................................3 Package conte
Inhaltszusammenfassung zur Seite Nr. 3
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Overview VIVOTEK FD7132 is a 3-axis fixed dome network camera with true day and night function for indoor 24-hour continuous surveillance. Coupled with a removable IR-cut filter and IR illuminators up to 15 M (50ft), the high-sensitive FD7132 provides superior quality images in both day and night conditions. The sophisticated 3-axis mechanism design offers very flexible, easy hardware installation for either ceiling or wall mo
Inhaltszusammenfassung zur Seite Nr. 4
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Physical description Light sensor Lens IR LEDs Tilt screw Built-in MIC Status LED PIR sensor Ethernet 10/100 RJ45 socket Power cord socket Indented reset button Focus controller Zoom controller Image adjustment screw MIC in I/O External/Internal MIC switch 1 2 3 4 Audio Out Mic. In Ext. Int. Audio out Pan screw General I/O terminal block Keep a note of the MAC address before installing the camera. Drill holes Network Camera Dom
Inhaltszusammenfassung zur Seite Nr. 5
VIVOTEK - A Leading Provider of Multimedia Communication Solutions DI/DO Diagram Refer to the following illustration for connection method. 12V PIN 1 Power+12V PIN 2 Digital output +12V PIN 3 Digital input PIN 4 Ground Status LED The LED indicates the status of the Network Camera. Description Status LED Blinking green and orange (twice) Power on or reset Non light During booting procedure Steady orange till IP address is confirmed Detecting and setting network Blinking orange and red continuousl
Inhaltszusammenfassung zur Seite Nr. 6
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Hardware Reset Status LED Reset button There is a button in the back of the Network Camera. It is used to reset the system or restore the factory default settings. Sometimes resetting the system could set the system back to normal state. If the system problems remain after reset, restore the factory settings and install again. Reset: Press and release the indented reset button with a needle. Wait for the Network Camera to reb
Inhaltszusammenfassung zur Seite Nr. 7
VIVOTEK - A Leading Provider of Multimedia Communication Solutions When mounting to a ceiling Through the two holes on each side of the camera base, Alignment sticker insert the supplied two screws to corresponding holes and secure them with a screwdriver. When mounting to a wall ■ Attach the alignment sticker to the wall. ■ Through the two circles on the sticker, drill two pilot holes into the wall. ■ Hammer the supplied plastic anchors into the holes. ■ Align the two holes on each side of
Inhaltszusammenfassung zur Seite Nr. 8
8 VIVOTEK - A Leading Provider of Multimedia Communication Solutions To adjust the zoom factor and focus range ■ Loosen the zoom controller and then adjust zoom factor by moving the controller left and right. Upon completion, tighten the zoom controller. ■ Loosen the focus controller and then adjust focus range by moving the controller left and right. Upon completion, tighten the focus controller. Loosen W T N Tighten DO NOT over tighten the controllers. Doing so can
Inhaltszusammenfassung zur Seite Nr. 9
PAR ION TIT LINK RE C EIVE POWE R COLLISION 1 2 3 4 5 VIVOTEK - A Leading Provider of Multimedia Communication Solutions Network deployment Setup the Network Camera over the Internet This section explains how to configure the Network Camera to Internet connection. 1. If you have external devices such as sensors and alarms, make connection from general I/O terminal block. 2. Connect the camera to a switch via Ethernet cable. 3. Connect the supplied power cable from the Network Camera to a po
Inhaltszusammenfassung zur Seite Nr. 10
PAR TITION LINK RE CE IVE POW ER COLLISION 1 2 4 3 5 VIVOTEK - A Leading Provider of Multimedia Communication Solutions IP address : 192.168.0.3 W WAN (Wide Area Network ) AN (Wide Area Network ) Subnet mask : 255.255.255.0 R Ro out uter er IP IP ad add dr ress : ess : f fr ro om m IS ISP P P Default router : 192.168.0.1 Internet L LAN (Local Area Network) AN (Local Area Ne R Rout oute er r I IP P a ad dd dr re es ss s : : 192.168.0.1 Cable or DSL Modem IP address : 192.168.0.2 Subnet mask : 255
Inhaltszusammenfassung zur Seite Nr. 11
PARTITION PARTITION LINK RE C E IV E POWE R COLLISION 1 2 3 4 5 LINK RE C E IV E POWE R COLLISION 1 2 3 4 5 VIVOTEK - A Leading Provider of Multimedia Communication Solutions Set up the Network Camera through Power over Ethernet (PoE) When using a PoE-enabled switch The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet cable. If your switch/router supports PoE, refer to the following illustration to connect the Network Camera to a PoE-enabled switch/router vi
Inhaltszusammenfassung zur Seite Nr. 12
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Software installation Installation Wizard 2 (IW2), free-bundled software packaged in the product CD, helps to set up your Network Camera in LAN. 1. Install the IW2 under the Software Utility directory from the software CD. Double click the IW2 shortcut on your desktop to launch the program. 2. The program will conduct analyses on your network environment. After your network environment is analyzed, please click Next to
Inhaltszusammenfassung zur Seite Nr. 13
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software. Using web browsers Make use of Installation Wizard 2 (IW2) to access to the Network Cameras in LAN. If your network environment is not in LAN, follow the steps to access the Netwotk Camera: ® 1. Launch your web browser (ex. Microsoft Internet Exp
Inhaltszusammenfassung zur Seite Nr. 14
VIVOTEK - A Leading Provider of Multimedia Communication Solutions ► By default, the Network Camera is not password-protected. To prevent unauthorized accesses, it is highly recommended to set a password for the Network Camera. For more information about how to enable password protection, please refer to Security on page 27. ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable your ActiveX Controls for your brow
Inhaltszusammenfassung zur Seite Nr. 15
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Using RTSP players To view the MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming. Quick Time Player Real Player VLC media player 1. Launch a RTSP player. mpegable Player 2. Choose File > Open URL. An URL dialog box will pop up. 3. The format is rtsp://:/
Inhaltszusammenfassung zur Seite Nr. 16
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Using 3GPP-compatible mobile devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed from the Internet. For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 9. To utilize this feature, please check the following settings on your Network Camera: 1. Because most players on 3GPP
Inhaltszusammenfassung zur Seite Nr. 17
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Using VIVOTEK recording software The product software CD also contains recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras. Please install the recording software; then launch the program to add the Network Camera to the Channel list. For detailed information about how to use the recording software, please refer to the user’s manual of the software or download it at http://www.
Inhaltszusammenfassung zur Seite Nr. 18
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Main Page This chapter explains the layout of the main page. It is composed of the following sections: Logo of VIVOTEK INC., Host name, Camera control panel, Menu, and Live video window. Logo of VIVOTEK INC. Host name Camera control area Live view window Configuration area Logo of VIVOTEK INC. Click this logo to visit VIVOTEK website. Host name The host name can be customized to fit your needs. For more information, please refer
Inhaltszusammenfassung zur Seite Nr. 19
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Live Video Window ■ The following window is displayed when the video mode is set to MPEG-4: MPEG-4 protocol and media options Video title Time Title and time Video 10:11:50 2008/01/09 Video and audio control buttons Video title: The video title can be configured. For more information, please refer to Video settings on page 44. MPEG-4 protocol and media options: The transmission protocol and media options for MPEG-4 vide
Inhaltszusammenfassung zur Seite Nr. 20
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Volume: When the Mute function is not activated, move the slider bar to adjust the volume at local computer. Mute: Turn off the volume at local computer. The button becomes Audio on button after clicking the Mute button. Talk: Click this button to talk to people around the Network Camera. Audio will come out from the external speaker connected to the Network Camera. Click this button again to stop talk. Mic Volume
