Bedienungsanleitung Wayne-Dalton 42

Inhaltszusammenfassung zur Seite Nr. 1

START HERE 8
Identify the supplied top brackets. Measure down from the top of the section 3-1/4” (83mm) and mark location. Align
WayneWood Doors Models: 40,42,43,45,47
the top holes on the top bracket with the mark and align the edge of the bracket with the edge of the section. Using the
top bracket as a template, drill (4) 9/32” (7mm) holes through the section. Secure the brackets using (4) 1/4-20 x 1-7/8”
Extension Spring Installation Instructions Layout
carriage bolts and hex nuts each.

Inhaltszusammenfassung zur Seite Nr. 2

Maintenance and Painting Instructions for All Wood Doors Required Tools These instructions apply to all Wood Doors produced and sold by Wayne-Dalton Corp. The interior IMPORT IMPORT IMPORT IMPORT IMPORTANT ANT ANT ANT ANT and exterior surfaces, as well as all edges must be properly primed, painted and maintained if satisfactory performance is to be achieved. SAFETY NOTICES SAFETY NOTICES SAFETY NOTICES SAFETY NOTICES SAFETY NOTICES The purpose for painting is to both protect and beautify the su