Inhaltszusammenfassung zur Seite Nr. 1
Operating Instructions
Digital Corded/Cordless Answering System
Model No. KX-TG6671
KX-TG6672
Model shown is KX-TG6671.
Before initial use, see “Getting Started” on
page 8.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for future
reference.
Consulte “Guía Rápida Española”, página 47.
This unit is compatible with Caller ID. You must subscribe to the appropriate service offered
by your service provider/telephone company
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Introduction Useful Information Model composition ..............................................3 Wall mounting ...................................................40 Accessory information ........................................3 Error messages ................................................41 Troubleshooting ................................................41 Important Information FCC and other information ...............................45 For your safety .....................
Inhaltszusammenfassung zur Seite Nr. 3
Introduction Model composition Base unit Handset Series Model No. Part No. Part No. Quantity KX-TG6671 series KX-TG6671 KX-TG6671 KX-TGA660 1 KX-TG6672 KX-TG6671 KX-TGA660 2 Accessory information Supplied accessories Quantity No. Accessory item/Order number KX-TG6671 KX-TG6672 A AC adaptor/PNLV226Z 2 3 B Telephone line cord/PQJA10075Z 1 1 *1 C 1 1 Desk stand/Wall mounting adaptor /PNKL1034Z1 D Corded handset/PNLXP1010Z 1 1 E Corded handset cord/PQJA212V 1 1 F Rechargeable batteries/HHR-4DPA 2 4
Inhaltszusammenfassung zur Seite Nr. 4
Introduction Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 51). Accessory item Order number *1 Rechargeable batteries HHR-4DPA R To order, please call 1-800-332-5368 or visit http://www.panasonic.com/batterystore Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset Headset KX-TCA60, KX-TCA93, KX-TCA94, KX-TCA400, KX-TCA430 T-adaptor KX-J66 *2 Range extender KX-TGA405 *1 Replacement batteries may have a di
Inhaltszusammenfassung zur Seite Nr. 5
Important Information the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) For your safety R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. To prevent severe injury and loss of life/property, read this Hospitals or health care facilities may be using section carefully before using the product to ensure equipment that could be sensitive to external RF proper and safe operation of your produ
Inhaltszusammenfassung zur Seite Nr. 6
Important Information R Operating the product near electrical appliances may cause interference. Move away from the electrical Important safety instructions appliances. When using your product, basic safety precautions should Routine care always be followed to reduce the risk of fire, electric R Wipe the outer surface of the product with a soft shock, and injury to persons, including the following: moist cloth. 1. Do not use this product near water for example, near R Do not use benzine, thinner
Inhaltszusammenfassung zur Seite Nr. 7
Important Information Specifications R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range: 1.92 GHz to 1.93 GHz R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit: Standby: Approx. 0.9 W Maximum: Approx. 1.5 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 2.0 W R Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) Note: R Design and specifications are subject to cha
Inhaltszusammenfassung zur Seite Nr. 8
Getting Started n Charger Setting up Connections R Use only the supplied Panasonic AC adaptor Hooks PNLV226. (120 V AC, 60 Hz) n Base unit B B A Battery installation A R USE ONLY Ni-MH batteries AAA (R03) size. R Do NOT use Alkaline/Manganese/Ni-Cd batteries. R Confirm correct polarities ( , ). Rechargeable Ni-MH ONLY To single-line telephone jack DSL/ADSL filter* (RJ11C) (120 V AC, 60 Hz) Correct Wrong R When the date and time setting is displayed, see page 12. *DSL/ADSL filter (not supplie
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started Note for battery charging Battery charging R It is normal for the handset to feel warm during Charge for about 7 hours. charging. R When the batteries are fully charged, the charge R Clean the charge contacts of the handset and indicator goes off and “Fully charged” is charger with a soft and dry cloth once a month. displayed. Clean more often if the unit is exposed to grease, dust, or high humidity. Confirm "Charging" is displayed. Battery level Charge indicator Icon Battery le
Inhaltszusammenfassung zur Seite Nr. 10
Getting Started MLOCATOR N MINTERCOM N M N (PLAY) Controls Message indicator MHOLD N Base unit MREDIAL N MPAUSE N A B C D E MFLASH N MCALL WAIT N M N (SP-PHONE: Speakerphone) SP-PHONE indicator n Control type Soft keys The base unit features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key – M D N, M C N, M N, or M N: Scroll through various lists and items. – VOLUME ( M D N or M C N): Adjust the receiver or speaker volume wh
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started Charge indicator Ringer indicator Display Message indicator Nonslip pad Base unit display items R Nonslip pad offers support when you cradle Item Meaning the handset between your shoulder and ear. Speaker Ringer volume is off. (page 14) M N (TALK) PRIV. Call sharing mode is off. M N (SP-PHONE: Speakerphone) (page 23) Headset jack In use Answering system is being Dial keypad ( *: TONE) used by a handset. Receiver Line in use Someone is using the line. Display Answering system ans
Inhaltszusammenfassung zur Seite Nr. 12
Getting Started Spanish is selected, 24-hour clock format is Item Meaning used. In use Answering system is being R The date and time may be incorrect after a used by the base unit or power failure. In this case, set the date and time another handset. again. Line in use Someone is using the line. Display language You can select either “English” or “Español” Initial settings as the display language. The default setting is “English”. n Direct command code: Programmable settings can be accessed by
Inhaltszusammenfassung zur Seite Nr. 13
Making/Answering Calls 3 When you finish talking, press MOFF N or place the handset on the charger. Making calls Using the speakerphone Using the base unit 1 Dial the phone number and press M N. R Speak alternately with the other party. 1 Dial the phone number. R To correct a digit, press MCLEAR N. 2 When you finish talking, press MOFF N. 2 Lift the corded handset. Note: 3 When you finish talking, place the corded R For best performance, use the speakerphone in handset on the cradle. a quiet en
Inhaltszusammenfassung zur Seite Nr. 14
Making/Answering Calls R Base unit: Base unit / Handset To turn the ringer off, press and hold M C N 1 9 a MPAUSE N until the unit beeps. 2 Dial the phone number. n Programming the volume beforehand: 3 Proceed with the operation for your unit. 1 MMENU N # 1 6 0 Base unit: Lift the corded handset. Handset: M N 2 M b N: Select the desired volume. a MSAVE N 3 Proceed with the operation for your unit. Note: Base unit: M n N (EXIT) R A 3.5 second pause is inserted each time Handset: MOFF N MPAUSE N
Inhaltszusammenfassung zur Seite Nr. 15
Making/Answering Calls R If another phone is connected to the same line, Note: you can also take the call by lifting its handset. R Please contact your service provider/telephone R While an outside call is on hold, the SP-PHONE company for details and availability of this indicator on the base unit flashes. service in your area. Mute Temporary tone dialing (for rotary/ pulse service users) While mute is turned on, you can hear the other party, but the other party cannot hear you. You can tempora
Inhaltszusammenfassung zur Seite Nr. 16
Making/Answering Calls Call share You can join an existing outside call. Base unit To join the conversation, lift the corded handset when the handset is on an outside call. Handset To join the conversation, press M N when the other unit is on an outside call. Note for base unit and handset: R A maximum of 4 parties (including 1 outside party) can join a conversation using 3 extensions. (4-way conference) R To prevent other users from joining your conversations with outside callers, turn call s
Inhaltszusammenfassung zur Seite Nr. 17
Shared Phonebook Key Character Shared phonebook 7 P Q R S 7 p q r s 7 The shared phonebook allows you to make calls without having to dial manually. The base unit and 8 T U V 8 any handset registered to the base unit can use t u v 8 the shared phonebook. You can add 100 names 9 W X Y Z 9 and phone numbers to the shared phonebook, and assign each phonebook entry to the desired group. w x y z 9 0 0 Important: # # R Only 1 person can access the shared phonebook at a time. R To enter another charact
Inhaltszusammenfassung zur Seite Nr. 18
Shared Phonebook 3 Edit the phone number if necessary (24 digits Finding and calling from a max.). a MOK N phonebook entry 4 M b N: Select the desired group (page 17). a MSELECT N 2 times Base unit / Handset 5 MOFF N Scrolling through all entries Erasing entries 1 M N Erasing an entry 2 M b N: Select the desired entry. Base unit / Handset 3 Proceed with the operation for your unit. Base unit: Lift the corded handset. 1 Find the desired entry (page 18). Handset: M N 2 MERASE N (soft key) a M
Inhaltszusammenfassung zur Seite Nr. 19
Shared Phonebook Note: 2 Lift the corded handset. R When storing a calling card access number and Note: your PIN in the phonebook as one phonebook R In step 1, if no phone number is stored to the entry, press MPAUSE N to add pauses after the speed dial button, you can assign a number by number and PIN as necessary (page 13). pressing M N and continue from step 1, R If you have rotary/pulse service, you need to “Assigning a phonebook entry to a speed dial press * (TONE) before pressing M N on the
Inhaltszusammenfassung zur Seite Nr. 20
Programming Programmable settings You can customize the unit by programming the following features. To access the features, there are 2 methods. Base unit / Handset n Scrolling through the display menus 1 MMENU N 2 Proceed with the operation for your unit. Base unit: Press M C N, M D N, M N, or M N to select the desired main menu. a MSELECT N Handset: Press M C N or M D N to select the desired main menu. a MSELECT N 3 Press M C N or M D N to select the desired item from the next sub-menus. a M
