Bedienungsanleitung Hobart ML-110975

Bedienungsanleitung für das Gerät Hobart ML-110975

Gerät: Hobart ML-110975
Kategorie: Spülmaschine
Produzent: Hobart
Größe: 0.6 MB
Datum des Hinzufügens: 11/10/2014
Seitenanzahl: 20
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Hobart ML-110975 zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Hobart ML-110975 finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Hobart ML-110975 auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Hobart ML-110975 im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Hobart ML-110975 auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Hobart ML-110975 Handbuch - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Hobart ML-110975 Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Hobart ML-110975 befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

MODEL AM14F, AM14T, & AM14TC
DISHWASHERS
MODELS
AM14F ML-110975
AM14T ML-110973
AM14TC ML-110974
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com
FORM 34555 (Dec. 2000)

Inhaltszusammenfassung zur Seite Nr. 2

POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OBTAINED FROM THE LOCAL GAS SUPPLIER. IMPORTANT IN THE EVENT A GAS ODOR IS DETECTED, SHUT DOWN UNIT(S) AT MAIN SHUTOFF VALVE AND CONTACT THE LOCAL GAS COMPANY OR GAS SUPPLIER FOR SERVICE. FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. © HOBART CORPORATION 1982, 1995 – 2 –

Inhaltszusammenfassung zur Seite Nr. 3

TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 INSTALLATION CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Inhaltszusammenfassung zur Seite Nr. 4

Installation, Operation, and Care of MODEL AM14F, AM14T, AM14TC DISHWASHERS SAVE THESE INSTRUCTIONS GENERAL The AM14T, AM14TC, and AM14F dishwashers are semi-automatic rack-type machines. On model AM14T (Fig. 1) the doors open on opposite sides of the machine allowing the rack to move straight through. Model AM14TC can be located in a corner; adjacent doors open so the rack moves in and out at a 90° angle. Model AM14F (Fig. 1) uses its pull-down front door for loading or unloading a rack of d

Inhaltszusammenfassung zur Seite Nr. 5

DO NOT attempt to operate this dishwasher in the chemical sanitizing mode without a properly installed, NSF-listed, chemical sanitizer feeder (not supplied with machine). Contact an authorized detergent representative for information about a chemical sanitizer feeder. The pump motor is rated 2HP and has thermal overload protection. The fill line incorporates an atmospheric vacuum breaker to prevent any reverse flow of water from the dishwasher into the potable water supply. A float, located in

Inhaltszusammenfassung zur Seite Nr. 6

On models AM14T and AM14TC, dish tables should be turned down and fitted into the dishwasher (Fig. 2). Use an NSF approved sealer between table and tank lip to prevent leakage. Fasten the tables to the tank lip with truss head screws. Dish tables are not required with model AM14F. High-temperature or gas heat dishwashers will probably require a hood or vent over the dishwasher in order to meet local codes. Low-temperature chemical sanitizing machines or low usage electric heat dishwashers may no

Inhaltszusammenfassung zur Seite Nr. 7

WATER CONNECTION A suitable water hammer arrestor should be installed in the water line just ahead of the dishwasher. Without Electric or Gas Booster Water Heater 3 The water supply line is connected to the line strainer (Fig. 1) with /4" pipe. A manual shut off valve and pipe union are required. The required incoming water supply temperature follows: Fill and Final Rinse — Water Supply Sanitizing Mode Minimum Temperature Recommended Temperature Hot Water Sanitizing 180°F (82°C) 180°F (82°C)

Inhaltszusammenfassung zur Seite Nr. 8

Static inlet gas pressure should not exceed 14" W.C. for either natural or propane gas. The minimum value is for purpose of input adjustment. The gas valve (Fig. 3) is provided with a pressure tap to measure the gas pressure downstream, which is also the manifold pressure. Gas supply piping must have a sediment trap (supplied by others) installed ahead of the dishwasher's Gas Valve gas control (Fig. 3). NOTE: DO NOT use Teflon tape on gas line pipe threads. For Manual Valve gas line pipe conn

Inhaltszusammenfassung zur Seite Nr. 9

➤ ➤ ➤ ➤ ➤ ➤ ➤ VENTING REQUIREMENTS — WITH GAS TANK HEAT The Hobart AM14F / AM14T / AM14TC dishwasher equipped for gas tank heat is not provided with a flue collar and is not intended to have the flue directly connected to a ventilation system. However, the products of combustion must be vented to the outside air. The most common method of venting is a vent hood over the entire dishwasher (Fig. 4). Refer to Rate of Exhaust Flow Calculations on the next page for calculations of the proper vent

Inhaltszusammenfassung zur Seite Nr. 10

➤ ➤ NOTE: Any listed and labeled factory-built commercial exhaust hood tested in accordance with UL Standard 710 by a nationally recognized testing laboratory, should be installed according to the terms of its listing and the manufacturer's installation instructions. LENGTH ➤ CLEARANCE HEIGHT RATE OF EXHAUST FLOW CALCULATIONS Based on the 1996 International Mechanical Code. The Rate of air flow required for a vent hood is calculated using the following definitions (Fig. 6): Q = Rate of Air Flow

Inhaltszusammenfassung zur Seite Nr. 11

ELECTRICAL CONNECTIONS WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT. Refer to the wiring diagram attached inside the control box and to the machine data plate for service size requirements when connecting the dishwasher. 7 NOTE: On models AM14T and AM14

Inhaltszusammenfassung zur Seite Nr. 12

ELECTRICAL DATA Minimum Circuit Ampacity Maximum Protective Device AMPS Model Volts / Hz / Ph Tank Heat Optional 13 KW Dishwasher ONLY Electric Booster ONLY Electric 60 208 - 240 / 60 / 1 Gas 20 208 / 60 / 1 Electric 80 240 / 60 / 1 Electric 80 AM14T Electric 30 AM14TC 208 - 240 / 60 / 3 Gas 15 AM14F 208 / 60 / 3 Electric 50 240 / 60 / 3 Electric 50 Electric 15 25 480 / 60 / 3 Gas 15 Compiled in accordance with the National Electrical Code, ANSI / NFPA 70 (latest edition). OPTIONAL EQUIPMENT CON

Inhaltszusammenfassung zur Seite Nr. 13

DETERGENT, RINSE AID, OR SANITIZER DISPENSERS — Tubing Installation All detergent, rinse aid, and / or sanitizer dispensers REMOVE PLUGS must have all connections sealed against leakage. TO INSTALL – The dishwasher uses 1.42 gallons per rack at a flow rate of 5.67 gallons per minute at 20 psig flowing pressure DETERGENT FEEDER TUBE (equivalent to a maximum head pressure of 46 feet of water). This information is used when setting the detergent, rinse aid, or sanitizer pumps. Detergent Dispenser

Inhaltszusammenfassung zur Seite Nr. 14

OPTIONAL EQUIPMENT CONNECTIONS — Detergent, Rinse Aid, Sanitizer Dispensers WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT. Detergent Dispenser (Fig. 10) Terminals DPS1 and DPS2 are supplied with controlled machine line voltage. They are ON during the was

Inhaltszusammenfassung zur Seite Nr. 15

6 POWER CYCLE O N / O F F FILL WASH 4 OPERATION PREPARATION Place the pump strainer (when equipped), overflow tube, overflow cover, end cover, slanted strainer, and the strainer bucket in their respective positions (Fig. 11). An automatic detergent dispenser is recommended. Closely follow supplier’s instructions. If no automatic dispenser is used, scatter the initial charge of detergent on the Fig. 11 slanted strainer. Replenish as needed. Open the manual gas valve (if applicable). Close the do

Inhaltszusammenfassung zur Seite Nr. 16

DISHWASHING Scrape the dishes to remove large particles of food and debris. Never use steel wool on ware to be loaded into the dishmachine. Fig. 14 Place the dishes in a rack so water has free access to all sides of every dish. Stand plates and dishes up edgewise in a peg-type rack (Fig. 14). Cups, glasses, and bowls should be inverted in an open-type or compartment type rack (Fig. 14). Silverware and other small pieces may be scattered loosely over the bottom of a flat-bottom rack. YCLE swi

Inhaltszusammenfassung zur Seite Nr. 17

CLEANING The machine must be thoroughly cleaned at the end of each working shift or at least daily. Never use steel wool to clean warewasher surfaces. Use only products formulated to be safe on stainless steel. Turn off the power switch. Open the machine door(s). Clean off the dish tables into the dishwasher. Drain the machine by pulling the drain lever (Fig. 11). Remove and empty the slanted strainer and strainer bucket. Wash and rinse them thoroughly. Raise the overflow cover and remove th

Inhaltszusammenfassung zur Seite Nr. 18

MAINTENANCE WARNING: DISCONNECT ELECTRICAL POWER SUPPLY (BOTH DISHWASHER AND BOOSTER IF APPLICABLE) AND PLACE A TAG(S) AT THE DISCONNECT SWITCH(ES) TO INDICATE THE CIRCUIT(S) ARE BEING WORKED ON BEFORE BEGINNING ANY MAINTENANCE PROCEDURE. Wash Arms Upper and lower wash and rinse arms (Figs. 15, 16) should turn freely and continue turning for a few seconds after being whirled by hand. To check, DISCONNECT ELECTRICAL POWER SUPPLY (BOTH DISHWASHER AND BOOSTER IF APPLICABLE), rotate arms, and remo

Inhaltszusammenfassung zur Seite Nr. 19

TROUBLESHOOTING Manual Reset Button on Pump Motor The motor is equipped with a gray manual reset button near the end cover of the motor. If the pump motor becomes overheated, the thermal overload protector will cause the motor to not operate. If this occurs, press the power switch OFF and allow the motor to cool. Then press the gray manual reset button, press the power switch ON, and resume normal operation. To avoid a service call, check symptoms and related possible causes. If machine stil

Inhaltszusammenfassung zur Seite Nr. 20

SYMPTOM POSSIBLE CAUSE Inadequate rinse or rinse water 1. Dirty line strainer causing reduced water flow. Turn off water supply, temperature is too low. remove strainer cap, withdraw and clean screen. Reassemble. 2. Low supply line pressure. 3. Excessive mineral deposits throughout wash and rinse system. Deliming may be necessary. 4. Incoming water temperature to booster (if applicable) below 110°F. Extend wash cycle from 40 to 60 seconds. Leaking valve (except solenoid 1. Foreign material pr


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Hobart 380-415/50/3* Handbuch Spülmaschine 488
2 Hobart 480/60/3 Handbuch Spülmaschine 106
3 Hobart ADVANSYS CL64ER Handbuch Spülmaschine 53
4 Hobart AM14C ML-32615 Handbuch Spülmaschine 109
5 Hobart AM14C ML-110977 Handbuch Spülmaschine 41
6 Hobart 208-240/60/3 Handbuch Spülmaschine 39
7 Hobart AM14F Handbuch Spülmaschine 58
8 Hobart AM14 ML-110976 Handbuch Spülmaschine 31
9 Hobart AM14 ML-32614 Handbuch Spülmaschine 101
10 Hobart AM14TC Handbuch Spülmaschine 20
11 Hobart AM14T Handbuch Spülmaschine 30
12 Hobart AM15T Handbuch Spülmaschine 67
13 Hobart AM15 ML-130038 Handbuch Spülmaschine 120
14 Hobart AM15F ML-130045 Handbuch Spülmaschine 15
15 Hobart AM15VLF Handbuch Spülmaschine 31
16 Edelbrock 1108 Handbuch Spülmaschine 2
17 2JANE Professional loudspeakers VX Series Handbuch Spülmaschine 2
18 2Wire Epson PowerLite Projector 7900P Handbuch Spülmaschine 15
19 321 Studios DeviceNet Network Scanner DVP-0204520-03 Handbuch Spülmaschine 1
20 321 Studios CallManager Extended Services Administrator's Guide 78-12959-01 Handbuch Spülmaschine 0