Inhaltszusammenfassung zur Seite Nr. 1
Instruction booklet
DISHWASHER
Contents
EN
Installation, 2-5
Positioning and levelling
English, 1
Technical data
Electrical connection
Connecting the water supply
Ecodesign Regulation
Description of the appliance, 6
Overall view
Control panel
Loading the racks, 7
Lower rack
Cutlery basket
Upper rack
Start-up and use, 8-9
Starting the dishwasher
FDEL 3101 EXPERIENCE
Loading the detergent
Washing options
Wash cycles, 10
Wash cycle table
Rinse aid and refined salt, 11
Loading the rinse aid
Loading
Inhaltszusammenfassung zur Seite Nr. 2
Installation Keep this instruction manual in a safe place for future Advice regarding the first wash cycle EN reference. If the appliance is sold, given away or moved, After the appliance has been installed, immediately before please ensure the manual is kept with the machine, so that running the first wash cycle, completely fill the salt the new owner may benefit from the advice contained within dispenser with water and add only then approximately 1 kg it. of salt (see chapter entitled Rinse a
Inhaltszusammenfassung zur Seite Nr. 3
The dishwasher meets the requirements set out by the Changing the Plug EN regulations in force concerning safety and electrical Cut off and dispose of the supplied plug if it does not fit equipment. your socket. Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried To avoid a shock hazard DO NOT insert the out by unaithorised persons will invalidate the guarantee, discarded plug into a socket anywhere else. as well as posing a potential h
Inhaltszusammenfassung zur Seite Nr. 4
Connecting the water supplies Sink Waste System EN Connect the outlet hose (without bending it) to a drain duct Connection to the water and electricity supplies should with a minimum diameter of 32 mm. only be performed by a qualified technician. The dishwasher should not stand on top of the water hoses or the electricity supply cable. Connecting the water inlet hose The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to a
Inhaltszusammenfassung zur Seite Nr. 5
Anti-flooding protection* EN To ensure floods do not occur, the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance. Some models are also equipped with the supplementary safety device New Acqua Stop*, which guarantees anti- flooding protection even in the event of a supply hose rupture. WARNING: HAZARDOUS VOLTAGE! Under no circumstance should the water inlet hose be cut as it contains live electrical parts. T
Inhaltszusammenfassung zur Seite Nr. 6
Description of the appliance Overall view EN 1. Upper rack 2. Upper sprayer arm 3. Tip-up compartments 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Cutlery basket 8. Washing filter 9. Salt dispenser 10. Detergent and rinse aid dispensers 11. Data plate 12. Control panel*** Control panel Half load button and indicator light Washing and 3h. Delayed start Low salt WASH CYCLE SELECT Delayed start button and indicator light ON/OFF knob indicator light indicator light indicator light
Inhaltszusammenfassung zur Seite Nr. 7
Loading the racks Upper rack Before loading the racks, remove all food residue from EN Load this rack with delicate and lightweight crockery: glasses, crockery and empty liquids from glasses and cups. cups, saucers and shallow salad bowls. After loading the appliance, make sure that the sprayer arms can rotate freely. Lower rack and cutlery basket The lower rack can hold pans, lids, plates, salad bowls, cutlery, etc. Large plates and lids should ideally be placed at the sides of the rack. Adjus
Inhaltszusammenfassung zur Seite Nr. 8
Start-up and use Starting the dishwasher Measuring out the detergent EN A good wash result also depends on the correct 1. Turn the water tap on. amount of detergent being used; exceeding the 2. Press the ON/OFF button: all the indicator lights on the stated amount does not result in a more effective control panel will light up for a few seconds. wash and increases environmental pollution. 3. Open the door and pour in a suitable amount of detergent (see below). Only use detergent whic
Inhaltszusammenfassung zur Seite Nr. 9
Wash options Half load EN The OPTIONS may only be set, modified or reset after If there are not many dishes to be washed, a half load the wash cycle has been selected and before the Start/ cycle may be used in order to save water, electricity and Pause button has been pressed. detergent. Select the wash cycle and press the HALF LOAD button: the indicator light will illuminate. Only the options which are compatible with the type of wash cycle set may be selected. If an option is not compat- Remem
Inhaltszusammenfassung zur Seite Nr. 10
Wash cycles If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, EN reduce the amount of detergent used accordingly. The number and type of wash cycles and options may vary depending on the dishwasher model. Detergent Wash Wash cycle (A) = compartment A cycles duration Wash cycle selection Wash cycle Options (B) = compartment B which (tolerance instructions include ±10%) Powder Liquid Tablets drying Hrs. Min. Heavily
Inhaltszusammenfassung zur Seite Nr. 11
Rinse aid and refined salt There is a water hardness level for every wash cycle: Only use products which have been specifically EN E.g.: wash cycle 1, water hardness level 1 designed for dishwashers. wash cycle 2, water hardness level 2, etc. etc., up to a maximum Do not use table salt or industrial salt, or washing of five levels. up liquid. (The default water softener setting is level 3). Follow the instructions given on the packaging. - To exit the function, wait approximately few seconds or
Inhaltszusammenfassung zur Seite Nr. 12
Care and maintenance Shutting off the water and electricity Clean the water inlet filter at the tap outlet regularly. EN supplies - Turn off the water tap. • Turn off the water tap after every wash cycle to avoid - Unscrew the end of the water inlet hose, remove the filter leaks. and clean it carefully under running water. - Replace the filter and screw the water hose back into • Always unplug the appliance when cleaning it and when position. performing maintenance work. Cleaning the filters Cle
Inhaltszusammenfassung zur Seite Nr. 13
Precautions and advice The appliance was designed and manufactured in Saving energy and respecting the EN compliance with current international safety standards. The environment following information has been provided for safety reasons and should therefore be read carefully. Saving water and energy • Only start a wash cycle when the dishwasher is full. While General safety waiting for the dishwasher to be filled, prevent unpleasant • This appliance is not intended for use by persons (including
Inhaltszusammenfassung zur Seite Nr. 14
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance EN (see After Sales Service). Problem: Possible causes / Solutions: The dishwasher does not start • Switch off the appliance by pressing the ON/OFF button, switch it back on after or cannot be controlled approximately one minute and reset the program. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly. The door won
Inhaltszusammenfassung zur Seite Nr. 15
After Sales Service After Sales Service Appliance Registration EN No one is better placed to care for your Hotpoint We want to give you additional benefits of Hotpoint appliance during the course of its working life than ownership. To activate your free 5 year parts guarantee us - the manufacturer. you must register your appliance with us. UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 Essential Contact Information www.hotpointservice.co.uk Hotpoint Service We are the largest service team
Inhaltszusammenfassung zur Seite Nr. 16
Guarantee 195102495.00 04/2012 pb - Xerox Fabriano Guarantee EN 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. This guarantee is
