Inhaltszusammenfassung zur Seite Nr. 1
1 HP
DUST
COLLECTOR
DC750
INSTRUCTION MANUAL
1
C o de: DC750
Black Magenta
Cyan Yellow D a t e:060906 E dition: 4 Op: BR
Inhaltszusammenfassung zur Seite Nr. 2
Contents Warranty 2 Warranty Powertools Whilst every effort is made to ensure your complete Introduction 3 satisfaction with this tool, occasionally, due to the mass Environmental protection 3 manufacturing techniques, a tool may not live up to our required level of performance and you may need the Description of symbols 3 assistance of our service department. Specifications 3 This product is warranted for a 2-year period for home Safety instructions 4 domestic use from the date of the orig
Inhaltszusammenfassung zur Seite Nr. 3
Dear Customer If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand. Introduction Description of symbols The rating plate on your tool may show symbols. Your new GMC power tool will more than satisfy These represent important information about the your expectations. It has been manufactured under product or
Inhaltszusammenfassung zur Seite Nr. 4
7. Dress correctly. Do not wear loose clothing or jewellery. General safety instructions They can be caught in moving parts. Rubber gloves and To use this tool properly, you must observe the safety non-slip footwear are recommended when working outdoors. regulations, the assembly instructions and the operating If you have long hair, wear a protective hair covering. instructions to be found in this Manual. All persons who use and service the machine have to be acquainted with this 8. Use s
Inhaltszusammenfassung zur Seite Nr. 5
• To avoid injury from accidental starting, unplug power cord 17. Stay alert. Watch what you are doing. Use common before changing or cleaning filter/dust bag or chip bag. sense. Do not operate a power tool when you are tired. • Do not use without filter/dust bag and/or chip bag in place. 18. Check for damaged parts. Before using a tool, check that there are no damaged parts. If a part is slightly • Turn off controls before unplugging. damaged, carefully determine if it will operate properly
Inhaltszusammenfassung zur Seite Nr. 6
Know your product 1. On/off switch 3 2. Inlet 3. Outlet 4. Handle 5. Wheels (x4) 6. Dust bag 7. Hose 8. Hose clamp 9. 2 Way adaptor 1 4 2 6 7 9 5 8 6
Inhaltszusammenfassung zur Seite Nr. 7
Introduction Attaching the hose C The dust collection system is specifically designed to 1. Fit the hose clamp (8) over the capture sawdust and woodchips. NEVER use as a vacuum. end of the hose (7) but do not tighten the clamp (fig. C). CAUTION. The dust collector housing features a high speed fan that can amputate fingers, grab loose clothing 2. Fit the hose onto the inlet (2) and neckties, or propel dust at high velocities. (fig. D). CAUTION. This dust collector does not eliminate the need
Inhaltszusammenfassung zur Seite Nr. 8
3. Ensure it is pushed all the way on and is secure on 2. Lift the switch to the ON position (I) to turn on and the hose. operate the dust collector (fig. M). 4. Tighten the hose clamp using a flat end screwdriver to 3. Push the switch down to the OFF position (0) to turn off secure the 2 way adaptor onto the hose (fig. H). the dust collector (fig. N). 5. When using only 1 tool fit M N the cap onto the end of the other hole in the 2 way adaptor (fig. I). H I Operation 1. Fit the ho
Inhaltszusammenfassung zur Seite Nr. 9
Maintenance WARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making and adjustments or maintenance procedures. Power cord maintenance If the supply cord needs replacing, the task must be carried out by the manufacturer, the manufacturer’s agent, or an authorised service centre in order to avoid a safety hazard. Cleaning 1. Keep the tool’s air vents unclogged and clean at all times. 2. Remove dust and dirt regularly. Cleaning is best don
Inhaltszusammenfassung zur Seite Nr. 10
Trouble shooting WARNING. Turn the on/off switch to the off position and unplug the tool from the power supply before performing trouble shooting procedures: Trouble Problem Suggested remedy Power cord not plugged in Ensure that the cord is connected to the power supply Dust collector will not start Power fault, fuse or circuit Check the power supply breaker tripped Cord damaged Use authorised service centre to repair or replace Burned out switch Use authorised service centre to repair or rep
Inhaltszusammenfassung zur Seite Nr. 11
11
Inhaltszusammenfassung zur Seite Nr. 12
GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservice.com.au. Should you not have access to the Internet, please contact our service department on 1300 880 001 (Australia) or 0800 445 721 (New Zealand). 7am –7pm, 7days a week (AEST). Please n
