Inhaltszusammenfassung zur Seite Nr. 1
R
JD-VD503 JD-VD503
SR
Inhaltszusammenfassung zur Seite Nr. 2
For attention of parents: In order to avoid the situation that you forget the parental lock code and can not enter into the operation of parental lock setting, here we offer you the super secret code: 1369. You may use this code to enter into the operation of parental setting. To prevent the young children from knowing this secret code, please tear the note from this user's manual and keep in secret place. Thanks.
Inhaltszusammenfassung zur Seite Nr. 3
R Thanks for purchasing the jWIN DVD player. Before operating this player, please read this manual and retain it for future reference. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within
Inhaltszusammenfassung zur Seite Nr. 4
R CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT, AND FULLY INSERT. This DVD player employs a laser system. CAUTION: Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. DO NOT STARE INTO BEAM. FCC NOTICE: This equipment has been tested and proved to comply with the limits for a Class B digital device, p
Inhaltszusammenfassung zur Seite Nr. 5
R IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ THESE INSTRUCTIONS AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. PLEASE HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any p
Inhaltszusammenfassung zur Seite Nr. 6
R 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 4
Inhaltszusammenfassung zur Seite Nr. 7
R Notes on Handling Notes on Moisture Condensation When shipping the DVD player, the original shipping carton Moisture condensation damages the DVD player. and packing materials come in handy . For maximum Please read the following carefully. protection, repack the unit as it was originally packed at the Moisture condensation occurs , for example, when you pour factory. a cold drink into a glass on a warm day. Drops of water form Do not use volatile liquids, such as insect spray, near the on the
Inhaltszusammenfassung zur Seite Nr. 8
R Points For Attention Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Dangerous high-voltage parts and Laser are present inside the enclosure. Do not open the cabinet. Refer servicing to qualified personnel only. Precautions on Use: DVD players are high-end electric appliances, in which large-scale integrated circuits and precise laser devices are incorporated. In order to prolong the lifespan of the appliance, please don't turn on and tu
Inhaltszusammenfassung zur Seite Nr. 9
R TABLE OF CONTENTS How to Set Up System--------------------- -26-31 General Setup Audio Setup SAFETY PRECAUTIONS--------------------1-2 Video Setup IMPORTANT SAFETY INSTRUCTIONS---------3-6 Password Setup Page Preference Setup Page Operating Interface ------------------------ 8-10 Front Panel How to Use Programming Function---------------32 Back Panel Ports Programmed Play for SVCD, VCD and CD Discs Remote Control Unit Programmed Play for DVD Disc VFD Display How to Use Search Function---------
Inhaltszusammenfassung zur Seite Nr. 10
R 1. OPERATING INTERFACE FRONT PANEL: 1. Disc Tray 9. POWER Button 2. OPEN/CLOSE Button 10. Remote Control Signal Sensor 3. PLAY Button 11. MIC Volume Control Knob 4. PAUSE Button 12. ECHO Control 5. STOP Button 13. MIC Jack1 6. STANDBY Button 14. MIC Jack2 7. RETURN Button 8. AUDIO Button 15. MIC Cover BACK PANEL PORTS: VIDEO S-VIDEO OPTICAL COAXIAL COMPONENT 5.1CH SURROUND MIXED VIDEO OUT AUDIO OUT AUDIO OUT 8
Inhaltszusammenfassung zur Seite Nr. 11
R REMOTE CONTROL: 1.POWER ON/STANDBY button 2.NTSC/PAL button 3.RECALL button 4.NUMBER button 5.STOP button 6.ZOOM button 7.PLAY button 8.PAUSE button 9.UP button 10.LEFT button 11.DOWN button 12.MENU (PBC) button 13.VOLUME control (-) 14.PREV. button 15.NEXT button 16.TITLE button 17. SLOW MOTION button 18. RETURN button 19. SUBTITLE button 20. OPEN/CLOSE button 21. SPECTRUM button 22. PROGRESSIVE button 23. CLEAR button 24. SEARCH button 25. 3D 26. AUDIO button 27. SETUP button 28. RIGHT butto
Inhaltszusammenfassung zur Seite Nr. 12
R VFD DISPLAY: When playing discs, VFD will be as follows. <1> Disc Format Display <4> Playing Display <7> Hour Display <2> Title Display <5> Repeat Display <8> Minute Display <3> Chapter/Track Display <6> Pause Display <9> Second Display 2. SUPPORTED DISC FORMATS 10
Inhaltszusammenfassung zur Seite Nr. 13
R 3. REFERENCE GUIDE On playing DVD discs On playing Picture CD discs On playing VCD discs On playing Super VCD discs On playing DVCD discs On playing CD discs On playing MP3 discs On playing WMA discs 4. PREPARATION BEFORE PLAYING 4.1 BATTERY INSTALLATION FOR REMOTE CONTROL Open the battery compartment lid and insert a pair of AAA batteries with correct polarity as indicated. Please point at the remote sensor on the player while using the remote control. 4.2 SYSTEM CONNECTION 1. Turn off the po
Inhaltszusammenfassung zur Seite Nr. 14
R Connect with TV 1. Normal connection Use the YUV cords to connect the player with the corresponding ports of the TV set as shown in the picture on the right. VIDEO 2.Connect with S-Terminal S-VIDEO OPTICAL COAXIAL COMPONENT 5.1CH SURROUND MIXED VIDEO OUT AUDIO OUT AUDIO OUT Connect one end of S-Terminal wire with S-Terminal output socket on this player back-panel and another with the S-Terminal input socket of the TV, and then connect audio wire with the TV. 3.Connect with YUV (Y Cb Cr) Termin
Inhaltszusammenfassung zur Seite Nr. 15
R Connect with AV power amplifier 1. Normal Connection The connection method is illustrated in the picture. 2. Connect with AV Amplifier with 5.1 Channel Surround Audio Input. 13
Inhaltszusammenfassung zur Seite Nr. 16
R 3. Connect with Optical-Digital Audio Terminal or Coaxial Terminal. Directly connect the optical or coaxial cord of the amplifier with optical or coaxial terminal of this player (this factory setting mode is SPDIF-PCM ), then connect video terminal of the player with video interface of TV. When using optical or coaxial output function of this player, please refer to 7.2 Audio setting up for the detailed setup method. 4.3 SETUP OF TV SIGNAL SYSTEM If picture is not full screen or edge of the pi
Inhaltszusammenfassung zur Seite Nr. 17
R Turn on the player 1.Press the"" POWER button to switch on the power Loading then it will load disc as illustrated at right. LOADING Note: Turn the volume of amplifier to the minimum. If this player has been connected with the amplifier, then turn the amplifier power on and switch input channeltoDVD. NO DISC No disc SR POWER ON OFF Note: If no opening picture or no color shows when turning on the player, please press"" NTSC/PAL button on the remote control, adjust the whole player output mode
Inhaltszusammenfassung zur Seite Nr. 18
R 3. Place a disc into the disc tray and then press the "OPEN/ CLOSE" button on the remote control or on the player to close the disc tray. The player can automatically Type of disc DVD discern different kinds of discs, and disc information may be displayed in the left upper corner of TV screen. OPEN/CLOSE OPEN/CLOSE Note:The disc tray shall be opened/ closed by pressing the OPEN/CLOSE button after power on. Do not push or pull the tray by force so as to avoid damage to the appliance. 4. After l
Inhaltszusammenfassung zur Seite Nr. 19
R 2. STOP PRESS PLAY KEY TO CONTINUE Press"" STOP once, the player enters memory-stop state; press again, the player will completely stop. STATEOFMEMORYSTOP 3. PREV (Track or Page) 4. NEXT (Track or Page) Note: Some discs do not support the functions described in item 3 and 4 above. 5. STANDBY STANDBY STANDBY 17
Inhaltszusammenfassung zur Seite Nr. 20
R 6. RETURN RETURN Back RETURN 5.2 NTSC/PAL SYSTEM Continuously press NTSC/PAL on the remote control to switch the following systems. Adjust the disc player output mode to match the TV system , either: MULTI NTSC PAL Note: 1. This player has the function of automatically discerning the format, and defaults to the NTSC system. If playing discs in NTSC format, the player can automatically switch to NTSC system. At this time, it is normal that the picture will be instantly flashed. 2. If the pictur
