Inhaltszusammenfassung zur Seite Nr. 1
DVD VIDEO PLAYER
DVD VIDEO PLAYER DVP3110K
Thank you for choosing Philips.
Need help fast?
Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
you may access our online help at www.philips.com/support
0 01-44_dvp3110K_56_eng.indd 1 1-44_dvp3110K_56_eng.indd 1 2 2007-02-09 2:42:15 PM 007-02-09 2:42:15 PM
Inhaltszusammenfassung zur Seite Nr. 2
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 2 01-44_dvp3110K_56
Inhaltszusammenfassung zur Seite Nr. 3
For Customer Use: LASER Read carefully the information located at Type Semiconductor laser the bottom or rear of your DVD Video InGaAlP (DVD) player and enter below the Serial No. AIGaAs (CD) Retain this information for future Wave length 658 nm (DVD) 790 nm (CD) reference. Output Power 7.0 mW (DVD) 10.0 mW (VCD/CD) Model No. DVP 3110K Beam divergence 60 degrees Serial No. ___________________ 01-44_dvp3110K_56_eng.indd 3 01-44_dvp3110K_56_eng.indd 3 2 200
Inhaltszusammenfassung zur Seite Nr. 4
General Information Environmental Information Laser Safety All unnecessary packaging has been This unit employs a laser. Due to possible omitted. The packaging has been made eye injury, only a qualifi ed service person easy to separate into two materials; should remove the cover or attempt to cardboard (box) and polyethylene (bags, service this device. protective foam sheet). NOTE: Pictures shown maybe different Your DVD player consists of materials between countries. which can be recycl
Inhaltszusammenfassung zur Seite Nr. 5
Language Code 5 0 01-44_dvp3110K_56_eng.indd 5 1-44_dvp3110K_56_eng.indd 5 2 2007-02-09 2:42:20 PM 007-02-09 2:42:20 PM
Inhaltszusammenfassung zur Seite Nr. 6
Contents Care and Safety Information Setup .............................................................................................................................................................8 Cleaning discs .............................................................................................................................................8 General Information Accessories supplied ...................................................................................................
Inhaltszusammenfassung zur Seite Nr. 7
Contents Preview ......................................................................................................................................................25 Viewing Audio CD playback information ................................................................... 25 Disc Go To / Track Go To / Track Selection ..................................................................................25 Repeat ......................................................................................
Inhaltszusammenfassung zur Seite Nr. 8
Care and Safety Information DANGER! High voltage! Do not open the Cleaning discs device. You run the risk of getting an electric shock. Some problems occur because the disc inside the player is dirty (frozen picture, The machine does not contain any sound disruptions, picture distortions). user-serviceable parts. Please leave To avoid these problems, discs should be all maintenance work to qualifi ed cleaned on a regular basis. personnel. To clean a disc, use a micro fi bre cleaning clo
Inhaltszusammenfassung zur Seite Nr. 9
General Information Accessories supplied Region codes This DVD player is designed to support the Region Management System. Check the regional code number on the disc package. If the number does not match Composite the player’s region number (see table video cable below), the player may be unable to (yellow) and playback the disc. Audio cables (white, red) Tips: – It may not be possible to play CD-R/RW or DVD-R/RW in all cases due to the type of disc or condition of the recording. – I
Inhaltszusammenfassung zur Seite Nr. 10
Connections Connecting to television COMPONENT COMPONENT VIDEO IN VIDEO IN S-VIDEO S-VIDEO IN V (Pr/Cr) IN AUDIO V (Pr/Cr) AUDIO IN IN U (Pb/Cb) U (Pb/Cb) VIDEO IN VIDEO IN COMPONENT Y S-VIDEO VIDEO IN COMPONENT Y IN V (Pr/Cr) AUDIO OUT S-VIDEO VIDEO IN IN V (Pr/Cr) AUDIO VIDEO IN U (Pb/Cb) OUT Y VIDEO IN U (Pb/Cb) Y 1 2 1 2 IMPORTANT! IMPORTANT! – You only need to make one video – The progressive scan video quality connection from the following is only possible when using YPbPr options, depen
Inhaltszusammenfassung zur Seite Nr. 11
Connections (continued) RF coaxial cable to TV 2 Back of RF Modulator (example only) AUDIO IN INT IN TO TV VIDEO IN R L CH3 CH4 1 IMPORTANT! C To hear sound of this DVD player – If your television only has a single through your TV, use the audio cables Antenna In jack (or labeled as 75 (white/red) to connect AUDIO OUT (L/ ohm or RF In,) you will need an RF R) jacks of the DVD player to the modulator in order to view the corresponding AUDIO IN jacks on the DVD playback on t
Inhaltszusammenfassung zur Seite Nr. 12
Connections (continued) Connecting the power cord After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. 12 0 01-44_dvp3110K_56_eng.indd 12 1-44_dvp3110K_56_eng.indd 12 2 2007-02-09 2:42:21 PM 007-02-09 2:42:21 PM
Inhaltszusammenfassung zur Seite Nr. 13
Optional connections Connecting to a stereo Connecting to a digital AV system receiver OPTICAL AUDIO IN Stereo system has right/ left Audio Receiver has a PCM, Dolby Digital In jacks or MPEG decoder A Select one of the video connections A Select one of the video connections (CVBS VIDEO IN or COMPONENT (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options VIDEO IN) depending on the options available on your television. available on your television. B Use the audio cables (white/re
Inhaltszusammenfassung zur Seite Nr. 14
Product Overview Front and Rear Panels STANDBY ON 2 – Turns on the player or switches to standby mode Disc Tray OPEN/CLOSE ç STOP – Opens or closes the disc tray. – Stops playback ON LED PLAY/PAUSE u – LED lights up when the power is – Starts or pauses playback. on. IR Sensor PLAY LED – Point the remote control towards – LED lights up during playback. this sensor Level – Microphone volume control Mic – For connecting microphone Mains ~ (AC Power Cord) – Connect to a standard AC outlet Audio
Inhaltszusammenfassung zur Seite Nr. 15
Product Overview (continued) Remote Control 2 DISC MENU – To switch the DVD player – Enters or exits the disc to standby mode or ON contents menu – Switches on or off the DISPLAY playback control mode (for – Displays information on TV VCD 2.0 only) screen during playback OK – Confi rms an entry or – Cursor buttons for moving selection to the left or right, do a fast forward/reverse search. RETURN/TITLE – To go back to previous – Cursor buttons for moving menu/ show title menu up/do
Inhaltszusammenfassung zur Seite Nr. 16
Getting Started Step 1 : Inserting Batteries Step 2 : Finding your viewing channel A Press STANDBY-ON 2 on the DVD player to turn it on. B Turn on the TV and set it to the correct video-in channel. You should see the blue DVD background screen. Usually these channel are between the A Open the battery compartment. lowest and highest channels and may be called FRONT, A/V IN, VIDEO. B Insert two batteries type R03 or AAA, See your TV’s manual for more following the indications (+ –) ins
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started (continued) G Select { On }, then press OK to confi rm. Step 3 : Setting up The menu will appear on the TV. Progressive Scan feature ACTIVATING PROGRESSIVE SCAN: 1. ENSURE YOUR TV HAS PROGRESSIVE SCAN. 2. CONNECT USING YPBPR (GBR) VIDEO CABLE. (for Progressive Scan TV only) 3. IF THERE IS A DISTORTED PICTURE, WAIT 15 SECONDS FOR AUTO RECOVERY. The progressive scan displays twice the number of frames per seconds than Cancel OK interlaced scanning (ordinary normal TV syst
Inhaltszusammenfassung zur Seite Nr. 18
Getting Started (continued) E Select a setting and press OK. Step 4 : Selecting the Follow the instructions show on the TV to confi rm the selection. matching color system CHANGING PAL TO NTSC: The color system of the DVD player, disc 1. ENSURE THAT YOUR TV SUPPORTS and TV should match in order for the NTSC STANDARD. 2. IF THERE IS A DISTORTED PICTURE disc to play. Before changing the TV DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVERY. system, determine the color s
Inhaltszusammenfassung zur Seite Nr. 19
Getting Started (continued) Audio, Subtitle and Disc menu Step 5 : Setting the language languages You can choose your preferred language The language options are different or sound track from audio, subtitles and depending on your country or region. It disc menu languages. If the selected may not correspond to the illustrations language is not available on the disc, the shown on the user manual. disc’s default language will be used instead. On-screen display (OSD) language Select
Inhaltszusammenfassung zur Seite Nr. 20
Playback from Disc IMPORTANT! – If the inhibit icon appears on Super Video CD the TV screen when a button is pressed, it means the function is not available on the current disc or at MP3-Disc the current time. – DVD discs and players are designed with regional restrictions. Before Supported formats playing a disc, make sure the disc is for the same zone as your player. MP3/WMA tracks – The fi le extensions has to be ‘.mp3’, ‘.wma’ – JPEG/ISO format Playable discs – Maximum 14 chara
