Bedienungsanleitung Philips MCD149/12

Inhaltszusammenfassung zur Seite Nr. 1

1
Quick Start Guide
2
User Manual
MCD149
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
AC power cord
Composite Video Cable
Remove the plastic
protective sheet
Remote control with
15-pin D-Sub cable FM antenna
battery
USB cable
Quick Start Guide User Manual
MCD149 QUG_Eng 1 2007.9.13, 15:54

Inhaltszusammenfassung zur Seite Nr. 2

1 Connect the speaker (subwoofer) cables. 2 Connect the FM antenna. Tips - See the User Manual for other TV 3 connection options. Connect the composite video cable to a TV. - Never connect the AC power cord 4 before connection of the 15-pin D-Sub Connect the power supplies of the system and TV. cable to avoid causing any damage to the set. FM antenna 2 A 1.000 3 1 1 DB15 CONNECTOR TO MAIN UNIT A To listen to the sound of this DVD Player SPEAKERS 4 through your TV, use the audio cables (w

Inhaltszusammenfassung zur Seite Nr. 3

Setting the clock 1 In standby mode, press and hold DISPLAY/CLOCK on the remote control. 2 When the hour digits flash, press VOLUME +/- on the front panel or VOL +/- on the remote to set the hours. 2; 3 Press DISPLAY/CLOCK again and the minute digits flash. Then press VOLUME +/- on the front panel or VOL +/- on the remote to set the minutes. 4 Press DISPLAY/CLOCK again to confirm the time setting. Tip Detailed playback features and additional functions are described in the accompany owner's manu

Inhaltszusammenfassung zur Seite Nr. 4

Playing a disc 1 Push OPEN•CLOSE 0 on the top of the system to open the disc door. 2 Insert a disc with the print side facing up and close the disc door. 3 Playback will start automatically. If not press ÉÅ. 4 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROG/ANGLE for more than two seconds to program all available stations in order of waveband. 3 Press í/ë until the desired preset station is displayed.