Bedienungsanleitung Philips MCD750/93

Inhaltszusammenfassung zur Seite Nr. 1

2
User Manual
1
Quick Start Guide
MCD750
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote control with two
Composite Video Cable
Power adapter
AAA batteries
(yellow)
FM antenna
Quick start guide User manual
MCD750 QSG_93_Eng 1 2010.3.31, 13:23

Inhaltszusammenfassung zur Seite Nr. 2

1 Connect the speaker cables. 2 Connect the FM antenna. Tips 3 – See the User Manual for other TV connection options. Connect the composite video cable to a TV. –For connecting to a Progressive Scan TV, refer to the user manual for proper 4 connections and detailed setup. Connect the power cords of the system and TV. 4 AC power Speaker Speaker (left) (right) FM antenna 3 2 1 AC power 4 Setting up the TV 1 Press SOURCE on th e system (or DISC on the remote control) to select disc source. 2 Turn o

Inhaltszusammenfassung zur Seite Nr. 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOL on the system or press VOL +/- on the remote control to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOL on the system or press VOL +/- on the remote control to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive s

Inhaltszusammenfassung zur Seite Nr. 4

Playing a disc 1 Press ç to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE on the system (or TUNER on the remote control) to select tuner source. 2 Press PROGRAM on the remote control for more than two seconds to program all available stations in order of wave