Inhaltszusammenfassung zur Seite Nr. 1
8” Portable DVD Player
PDV-0800
Operation Manual
20040928
Inhaltszusammenfassung zur Seite Nr. 2
Contents Important Safety Instructions --------------------------------------------------------------------- 4 Precautions with Moisture ------------------------------------------------------------------------ 5 Function Features ----------------------------------------------------------------------------------- 6 Parts Introduction ------------------------------------------------------------------------------------ 7 9 Remote Control ---------
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instruction WARNING: To reduce the risk of fire or electric shock, DO NOT expose this product to rain or moisture. The lighting flash with arrowhead symbol,within an triangle, alerts the user to “dangerous voltage” which could cause electric shock. The exclamation point within a triangle indicates to the user to read important operating and maintenance instructions in the manual. IMPORTANT FOR LASER PRODUCTS NOTES 1. CLASS 1 LASER P
Inhaltszusammenfassung zur Seite Nr. 4
Precautions with Moisture Under the following circumferences, moisture may appear on the lens of the product, which is the most sensitive part of the DVD player: • The DVD player is suddenly moved from a cold place to a warm place. • A room is heated while the DVD player starts operating, or the DVD is placed near an air-conditioner. • In the hot summer season, the DVD player is moved from an air-conditioned room to a hot, damp place to be used. • The
Inhaltszusammenfassung zur Seite Nr. 5
Function Features 1. EXCELLENT SOUND Continues playing from place stopped. Dolby digital delivers great sound. 8. ON-SCREEN DISPLAY 2. HIGH RESOLUTION On- screen displays in your choice of MPEG2 decoding format achieves more English/Spanish/French. than 500 lines of horizontal resolution. 9. AUDIO OUT 3. SPECIAL FUNCTIONS Audio output ter minal for connection Supports multi-angle, extra language
Inhaltszusammenfassung zur Seite Nr. 6
Parts Introduction DVD Player 1. Power switch 14. Bright up/down 2. Disc cover 15. Speaker 3. Open disc tray For enjoying high quality stereo music. 4. Remote sensor 16. Rotate button 5. Direction buttons The picture can be rotated for viewing. 6. Prev skip button 17. TFT Liquid Crystal Display Press to skip to previous chapter/track. 18. Color up/down 7. Next skip button 19. Mode button Press to skip to next
Inhaltszusammenfassung zur Seite Nr. 7
Inhaltszusammenfassung zur Seite Nr. 8
Parts Introduction Right Side Panel 1. Volume adjusting knob Used to adjust the earphone and speaker volume. 2. Earphone jack HI-FI earphone output, when connecting this jack, speaker volume is turned off. 3. Audio output/input jack 4. Video output/input jack 5. Switch for AV ‘IN’ and AV ‘OUT’ • Switch to IN to set the player for audio and video input mode. • Switch to OUT to set the player for normal playback mode. 6. Direct current 1
Inhaltszusammenfassung zur Seite Nr. 9
Remote Control 1. PWR button 5. ENTER button Press to enter standby mode. Press to confirm the items or setting. 2. INFO button 6. SETUP button Press for detailed information on the Press to access the DVD player’s setup disc playing. menu. Press repeatedly to remove information 7. 0-9 number buttons from screen. Select numbers by pressing these 3. TITLE button buttons. Press to display title menu
Inhaltszusammenfassung zur Seite Nr. 10
Remote Control 9. NEXT SKIP button 17. STOP button Press to go to next chapter. Press once to stop playback. Press PLAY 10. SUBT button button to resume normal playback. When a DVD is playing, press to select Press the button twice to stop playback a subtitle language or to turn subtitles completely. off. 18. PLAY button 11. ANGLE button Press to begin playback. Press to access various camera angles 19. GOTO button (if the DVD disc contains
Inhaltszusammenfassung zur Seite Nr. 11
Connections Connecting to a TV Audio/video connections 1. Always ensure that the DVD player, TV and any other electrical equipment you are connecting the DVD player to is switched off and unplugged from the power supply. 2. The easiest way to connect the DVD player to a television is via the supplied Audio/Video connections. Connect the audio/video cable from the DVD player to the TV’s audio/video inputs. Connecting to an Ampli
Inhaltszusammenfassung zur Seite Nr. 12
Playback Preparations Usage of Remote Control 1. Refer to the drawing and remove the empty battery receptacle. 2. Prior to shipping, a separating film was applied to the battery. Remove this film. 3. Press the battery into the receptacle and insert the receptacle into the remote. 4. For best results, aim the remote directly at the player’s receiving window within the range of 15 feet, and angle
Inhaltszusammenfassung zur Seite Nr. 13
Playback Preparations Disc Formats Supported by this Player The unit can play discs bearing any of the following logos: PLAYBACK TIME/ DISC LOGO DIAMETER PLAYABLE SIDES 133 min (SS-SL) 242 min (SS-DL) 12cm 266 min (DS-SL) 484 min (DS-DL) DVD 41 min (SS-SL) 75 min (SS-DL) 8cm 82 min (DS-SL) 150 min (DS-DL) 12cm 74 min CD 8cm 20 min MP3 12cm 600 min • The operating method of some DVD discs is specified by the software maker. Pl
Inhaltszusammenfassung zur Seite Nr. 14
Playback Preparations Usage of Switching Power Adapter The player is supplied with a power switching adapter. 1. Connect AC adaptor to the power jack marked “DC 12V IN” on the side of the DVD player. 2. Connect the rabbit joint end of the AC adaptor to the power cord. 3. Plug the two-prong end of the power cord to a grounded electrical socket. Note: Turn player’s power off first and then unplug the power adaptor to prevent
Inhaltszusammenfassung zur Seite Nr. 15
Power Supply Using and Charging the Battery Pack Charge the Battery Pack before using it the first time. Charging time is normally 3-4 hours. Do not charge the Battery Pack more than 4 hours as it could reduce service life. Normally, the Battery Pack can be charged approximately 300 times. When fully charged, the Battery Pack delivers 3-4 hours of continuous power. Battery Pack should be fully charged before initial use! 1. Attaching the Battery Pack Tu
Inhaltszusammenfassung zur Seite Nr. 16
Detaching Battery Pack Detaching Battery Pack from the unit: If the player is not going to be used for a long period of time, we recommend that you detach the Battery Pack. Even if the unit is powered down, it still consumes some power in STANDBY mode and will discharge the battery. Make sure the power is turned off before detaching the Battery Pack. After detaching the battery pack, take care when handling the unit. 1. Slide and hold in position. Press the tab tow
Inhaltszusammenfassung zur Seite Nr. 17
Basic Operation Please read these instructions carefully before using your DVD player for the first time. 1. Turn on the player’s power by switching the POWER switch on the side of the player to “ON”. 2. Press OPEN button on front panel to open the disc cover. 3. Remove the protective lens cover. 4. Load disc with the label facing up to prevent damage to the player or disc. 5. Close the disc cover. The player will automatically search for the
Inhaltszusammenfassung zur Seite Nr. 18
Basic Operation Stop During playback, press the STOP button on the remote control to stop playing. Press the PLAY button and the player will play from the point where it stopped. Mode During playback, press the mode button on the control panel to change the aspect ratio on the screen. Title Menu 1. Press the TITLE button on the remote control during payback. The title menu will appear on the TFT screen. 2. Press (direction button) or the number buttons to
Inhaltszusammenfassung zur Seite Nr. 19
System Setup GENERAL SET-UP You can change the default settings to customize performance to your own preference. 1. Remove the disc from the DVD drive and press the ‘SETUP’ button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup and Preference setup. 2. Press (direction buttons) on the remote control to select a category. 3. All the items in the category will a
Inhaltszusammenfassung zur Seite Nr. 20
System Setup 3. OSD Lang There are five kinds of different OSD languages for selection. 4. SPDIF Output This item is used to set the format of digital audio. ‘SPDIF OFF’ turns off the digital audio; ‘SPDIF/RAW’ outputs the original. For example, if the disc being played is Dolby Digital, then the digital audio output is also Dolby Digital. Select ‘SPDIF/PCM’ when you connect with a 2 channel digital stereo amplifier. 5. Captions Sw
