Inhaltszusammenfassung zur Seite Nr. 1
Warning! Table of Contents
THE 410X DVD/CD/MP3 PLAYER IS DESIGNED TO ENABLE Introduction........................................................................ 2
VIEWING OF DVD OR CD-VIDEO RECORDINGS ONLY FOR
REAR-SEAT OCCUPANTS.
Care and Maintenance ......................................................3
MOBILE VIDEO PRODUCTS ARE NOT INTENDED FOR VIEW-
Discs Played by the 410X .................................................4
ING BY THE DRIVER WHILE THE VEHICLE IS IN MOTION.
SUCH USE MAY DIST
Inhaltszusammenfassung zur Seite Nr. 2
Note: INTRODUCTION • The 410X is designed to be a component in a full audio/video system. If you have any questions about compatible components, such as monitors, FM modulators, or other audio/video products, please The 410X is a full-featured disc player, supporting DVD, CD- contact your authorized Rosen/necvox dealer. Video, CD-Audio, and MP3 playback, and is designed specifically for the mobile environment. It is intended for use Accessories Supplied with the 410X with other Rosen/necvox prod
Inhaltszusammenfassung zur Seite Nr. 3
FCC Approval CARE AND MAINTENANCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Handling Discs FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Always handle a disc by its edges. Never touch the surface of installation. This equipment generates, uses, and can radiate the disc directly. To remove inadvertent fingerprints and dust, radio frequency energy
Inhaltszusammenfassung zur Seite Nr. 4
Do not attempt to open the unit or the remote control. The DISCS PLAYED BY THE 410X internal parts are not serviceable by the user. Opening any of the components will void the warranty. THE 410X IS A CLASS I LASER PRODUCT, USING A LASER WHICH COULD Discs Compatible with the 410X CAUSE HAZARDOUS RADIATION EXPOSURE IF IMPROP- ERLY DISASSEMBLED. All service should be performed by DVD, Video CD (VCD), CD/CD-R, and MP3 discs are compat- authorized Rosen service centers or other qualified service ible
Inhaltszusammenfassung zur Seite Nr. 5
the DVD disc does not correspond to the Region number of USING THE 410X this player (Region 1), this player will not be able to play the DVD disc. Some DVD discs are manufactured to operate in In order to operate the 410X, the vehicle ignition key switch “all” zones, and those discs are compatible with the 410X. must be in the ACC or engine ON position. Region Icons: ACC or engine ON position 1 4 ALL 1 6 WARNING! To prevent the battery from going dead, operate this unit with the engine Discs
Inhaltszusammenfassung zur Seite Nr. 6
The Nav Keys are used to navigate disc-generated menus Front-Panel Controls and setup menus of the 410X. For information on using the rest of the front-panel controls, please see the sections describing disc playback. Previous Play/ Disc slot Power Eject button Stop Next Pause The IR Receiver detects the signals from the included infrared remote control. Aim the remote control at the IR IR receiver receiver during use. ENT Please note that information about using the 410X will be displayed on th
Inhaltszusammenfassung zur Seite Nr. 7
Using the Remote Control THE REMOTE CONTROL Aim the remote control towards the IR receiver on the front panel. The remote control can operate at a 30-degree angle from the front of the unit. SETUP MUTE If you try to perform an action that is not permitted at the POWER SETUP MUTE EJECT moment, the 410X displays the following symbol: POWER EJECT UP DISPLAY MENU TITLE DISPLAY TITLE ENTER/SELECT MENU RETURN ENTER RETURN LEFT PREVIOUS RIGHT PREV NEXT SLOW TRACK/ This is typically displayed if a key
Inhaltszusammenfassung zur Seite Nr. 8
Disc Playback DVD/VCD/CD-AUDIO PLAYBACK DVD playback will often begin automatically when the disc is inserted. With some DVD discs, you will need to press Inserting a DVD/VCD/CD [ENTER] or [ ] to begin playback. 1 Turn the vehicle’s ignition key to the ACC or ON position. CD-Audio discs will begin playback automatically. ACC or engine CDs with MP3 files may require you to navigate the file ON position structure menu. For more information, see “MP3 Playback on CD-R Discs.” 2 Press either the [ON]
Inhaltszusammenfassung zur Seite Nr. 9
Moving to the Previous Track or Chapter Repeat Mode Press the [PREVIOUS] button during playback. The first time Press the [REPEAT] button to select from the following repeat this button is pressed, playback of the current track or chapter modes: will restart from the beginning. Pressing this button again will cause the previous track or chapter to be played. Repeat 1 - Repeat - Repeat Off. Note: With DVD playback, pressing the [REPEAT] button once • For some VCD 2.0 discs, the [PREVIOUS] and [NE
Inhaltszusammenfassung zur Seite Nr. 10
The factory default password is 3308. The password can be Parental Control changed—see section “Setup.” The film ratings allowed are The Parental Control feature allows authorized users to also selected in the “Setup” section. select an upper limit to film ratings that can be played by the Notes: 410X. If a DVD is inserted with a film rating higher than that • To change the film rating setting, the password must be used. selected, the following screen appears: • The 410X determines the correct
Inhaltszusammenfassung zur Seite Nr. 11
MP3 PLAYBACK ON CD-R DISCS - - SMART NAVI - - ROOT ROOT 0 MP3 (ARTIST NAME) 1 MP3 (ARTIST NAME) 2 What is MP3? MP3 (ARTIST NAME) 3 MP3 is an audio compression method. This audio compres- sion method has become a standard format with many PC ARTIST NAME - SONG TITLE users. MP3 allows the original digital audio data to be compressed to about 10 percent of its initial file size while still retaining high sound quality. This means that about 10 music To move to the n
Inhaltszusammenfassung zur Seite Nr. 12
File Extensions Always add a file extension “ .MP3” or “.mp3” to an MP3 file by using single-byte letters. If you add a different file exten- sion, or forget to add the file extension “ .MP3” or “.mp3,” the file cannot be played. In addition, if you use upper case and lower case letters (capital and small letters) mixed together for file extensions, normal play may not be possible. 12 410X
Inhaltszusammenfassung zur Seite Nr. 13
Installation and Wiring 2. Package Contents • 410XR disc unit 1. Before Starting • IR Remote control • 4-pin Power Supply harness Read these instructions and the following precautions • RCA Audio Cable carefully. • Additional IR Receiver (with cable) • Installation Brackets and Assorted Hardware WARNING! • Owner’s Manual / Installation Guide Be sure to disconnect the battery (-) • Warranty Card terminal before starting. This is to prevent short circuits during installation. 3. Installation Requi
Inhaltszusammenfassung zur Seite Nr. 14
4. Installing the 410X Rear fastening hole of vehicle, or backstrap Installing into the DIN Sleeve Instrument panel Hole First, verify that the opening you will be mounting the 410X into will accommodate the mounting sleeve. Sleeve opening dimensions Bend tabs to lock sleeve into place Nut and washer 7-3/16" (182 mm) Hole Rear mounting bolt Note: DIN mounting sleeve • Some car models require special mounting kits for proper installation. Consult your Rosen/necvox dealer for details. Tabs DIN s
Inhaltszusammenfassung zur Seite Nr. 15
Removing the 410X from the DIN Mounting Sleeve Installing into a Fixed In-Dash Mount Note: Some vehicles use the “ISO” standard radio-mounting system. ISO-style factory radio locations use right-angle • This requires you to have the original release tools provided with the 410X. Keep these tools in a safe place, not in the vehicle. brackets that mount to the instrument panel, behind a trim ring. ISO mounting systems are typically found in Asian- 1 Remove the rear nut. designed vehicles. 2 Remove
Inhaltszusammenfassung zur Seite Nr. 16
2 Remove the clips on the sides of the 410X. 3 Mount the unit to the factory radio brackets, and bolt the brackets to the dashboard. Reassemble the dash. Note: • In some cases the factory trim panel may require some slight DIN sleeve spring clip 2-Screw trimming, or there may be a slight gap that requires filling. Spring clip Screwdriver Factory Radio Mounting Screw bracket Bracket Dashboard Factory to 410X Trim Screws OEM or aftermarket Radio Factory Radio Mounting Bracket Factory S
Inhaltszusammenfassung zur Seite Nr. 17
5. Wiring the 410X The following pages display wiring diagrams for 410X configu- Factory Radio Mounting Bracket rations. Factory Radio (1 pair for the left and right sides) Mounting Screws (retain) Read the following precautions before wiring your system. • Disconnect the negative battery terminal before making any wiring connections. 410X • Be particularly careful where you route wires. Keep them away from the engine, exhaust system, etc. Heat may damage wires. • If the fuse should blow, make
Inhaltszusammenfassung zur Seite Nr. 18
410X Rear-panel Connections Audio L and R Output Video Output (Yellow) (White - L, Red - R) Optional External IR input Four-pin Power Digital Connector optical output NOTE: Not all Rosen/necvox four-pin connectors use identical wire assignments - ONLY USE THE FOUR-PIN CONNECTOR SUPPLIED WITH THIS UNIT! Fuse/ filter box Black Wire side of Yellow - Ground Power Connector: +12V Main power Red Black Yellow Red +12V Accessory - Ground +12V Main +12V Power Accessor
Inhaltszusammenfassung zur Seite Nr. 19
410X in a typical system To Radio and Antenna Monitor FM Mod Power Supply Module for Monitor Video Output (Yellow) Power Harness, Monitor Optional External IR input Audio L and R Output (White - L, Red - R) Fuse/ Digital Black - Ground output filter box Red +12V Accessory Power Harness, 410X Yellow +12V Main power 410X 19
Inhaltszusammenfassung zur Seite Nr. 20
Changing Settings SETUP The following sections explain how to customize various features of the 410X. 410X Typical Setup and Configuration To change settings for your 410X: The 410X is shipped with the following configuration: 1 Press [SETUP]. • Standard 4:3 aspect ratio format output 2 Use the [ ] and [ ] buttons to highlight a selection. 3 Press the [ENT] button to confirm your selection. • Automatic NTSC/PAL output switching • Analog stereo audio, digital audio output off SETUP MENU -- MAIN P
