Inhaltszusammenfassung zur Seite Nr. 1
DVD+VCR
HOME THEATER SYSTEM
R
JPG
HIGH QUALITY
FILES
CD-R CD-RW
OWNER'S MANUAL
IMPORTANT
This Unit does NOT allow copying
from DVD to VCR Tape
Inhaltszusammenfassung zur Seite Nr. 2
Important Safety Instructions This video cassette recorder (VCR) uses "ONLY" cassette tapes, NTSC video signals (standard in US). WARNING The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, The exclamation point within the equilateral triangle is DO
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose o
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Special Functions ................................. 25-27 Display function (DVD) .......................................... 25 GOTO function (DVD) ........................................... 25 Locating a specific title ......................................... 26 IMPORTANT Locating a specific title/chapter/track .................. 26 This Unit does NOT allow Locating a specific time ......................................... 27 Angle setting ...................................
Inhaltszusammenfassung zur Seite Nr. 5
Disc Formats The unit can playback. DVDs [8cm(3")/12cm(5”) disc] Compatible Audio CDs [8cm(3")/12cm(5”) disc] Region Management Information Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this unit, this unit cannot play that disc. 1 The region number of this Unit is 1. Disc Function or Operation that is Not A
Inhaltszusammenfassung zur Seite Nr. 6
Parts and Functions Front Panel 123 4 5 6 7 20 19 1817 16 15 14 13 12 11 10 9 8 1) POWER/ STANDBY button seconds. If you press the POWER button on the remote control, the Unit will turn off and go into Turn the power on or off. standby mode. The light will continue to illuminate. 2) STOP button (for VCR) 14) VCR POWER/TIMER/VCR/REC indicator Stop playing a tape. VCR POWER : This indicator lights up whenever the 3) PLAY button (for VCR) VCR is turned on. Press to start or resume playback TIMER :
Inhaltszusammenfassung zur Seite Nr. 7
Parts and Functions Rear Panel 21 22 23 24 25 26 27 28 AC R FM AN T. IN 300 () Ω AUDIO L AM LO OP VID EO AN T. OUT VHF /UH F/ CATV 37 36 35 34 33 32 31 30 29 21) Power cord 30) AM LOOP ANTENNA terminal 22) S-VIDEO (DVD) output jack 31) TV OUT (VIDEO) jack 23) Right Front speaker terminals 32) VIDEO IN (VCR) jack 24) Centre speaker terminals 33) Left Rear speaker terminals 25) Left Front speaker terminals 34) Subwoofer speaker terminals 26) AV1 IN (AUDIO) jacks 35) Right Rear speaker terminals 2
Inhaltszusammenfassung zur Seite Nr. 8
Parts and Functions 1) POWER / button Remote Control Turns the Unit on and puts it in standby mode. 2) RETURN button Return to the normal operation after using the SETUP menu. 3) Number (0 - 9) and AM/PM (+10) buttons Use when creating programs, and entering a parental level OPEN/ POWER CLOSE password. To select numbers over 9, press +10 button and RETURN FUNCTION then the second no. for example, to enter 18, press +10 and 1 then 8. GOTO 2 AM/PM : Select AM or PM during time setting. 4) 5.1 Ch
Inhaltszusammenfassung zur Seite Nr. 9
Parts and Functions 21) FUNCTION button Remote Control Display the FUNCTION screen where you can check or change various setting. 22) OPEN / CLOSE button (for DVD) Use to open or close the disc tray. 21 OPEN/ 23) GOTO button POWER CLOSE Skip directly to a specific location on a DVD disc. RETURN FUNCTION 24) 2.1 CH button 22 Switch speaker outputs to 2.1 channel. (Front left/right GOTO speakers + subwoofer) 23 25) SOUND button AM/PM Selects sound balance and tone controls for adjustment with the
Inhaltszusammenfassung zur Seite Nr. 10
Display Front Panel Display MEMORY ANGLE indicator CHAPTER / TRACK indicator REPEAT 1 Appears when multiple camera angles indicator When a DVD is loaded in the playback are recorded in the section of the DVD Displayed Unit, this indicator appears indicator that is currently playing. during along with the chapter number. Displayed programmed When a Audio CD is loaded in during playback. the Unit, this indicator appears R. TOTAL(REMAIN.TOTAL) repeat along with the track number. indicator playback.
Inhaltszusammenfassung zur Seite Nr. 11
Connections 1. Connecting to your TV The Unit can be connected to your TV in several different ways, depending on the design of your TV. 1. Connect the TV antenna (coaxial cable) to the input jack on the unit. 2. Attach one end of the supplied coaxial cable to the output jack on the unit, and the other end of the cable to the input jack on your TV. Alternate Connections: 1. If your TV has Audio/Video inputs, you can also connect the unit to your TV using the supplied Audio/Video cord. 2. If
Inhaltszusammenfassung zur Seite Nr. 12
Connections Cable TV Connections Your VCR is capable of receiving the following non-scrambled channels. Scrambled channels can be received with the cable box supplied by your cable TV company. Preparation Set the 3 4 Output Channel of the VCR to 3 or 4. See Setting the 3 4 Output Channel. First check your TV/CATV system Step 1: Is your TV cable compatible with the VCR? YES Go to Step 2 NO Go to Step 3 Step 2: Does your CATV system have some or all channels scrambled? YES Go to
Inhaltszusammenfassung zur Seite Nr. 13
Connections B. Connection with cable box 1. Connect as shown. With this connection, it is possible to record descrambled CATV signals. Then plug in the power cords of the TV and cable box. Rear of Unit Cable Box IN OUT Coaxial cable (Not supplied) TV Rear From IN CATV ANT/CABLE system Coaxial cable (supplied) OUT VHF/UHF/ CATV Notes: If the cable box is turned off, it will not output any signals, thus making it impossible to record or view a programme from the CATV system. In the case of the
Inhaltszusammenfassung zur Seite Nr. 14
Connections C. Connection with cable box, A/B switch and splitter By using an A/B switch or splitter, it is possible to switch between the cable box and the VCR output. For example, while recording a TV programme with the VCR, it is possible to watch a CATV programme (including descrambled programmes) using the A/B switch. Connect as shown. Then plug in the power cords of the TV and cable box. Cable Box IN OUT TV Rear Coaxial cable (Not supplied) Splitter A/B switch From Rear of Unit (Not supp
Inhaltszusammenfassung zur Seite Nr. 15
Connections D. Connection with two cable boxes, A/B switch and splitter The following connection is necessary to record a cable TV programme (even those scrambled by a cable company) while watching another cable TV programme. The following connection requires two cable boxes, a 2- way splitter and an A/B switch. Connect as shown. Then plug in the power cords of the TV and cable box. Cable Box 1 IN OUT TV Rear Splitter A/B switch (Not supplied) From Rear of Unit (Not supplied) CATV ANT/CABLE sy
Inhaltszusammenfassung zur Seite Nr. 16
Connections 3.Connecting the speakers & subwoofer 1. The speaker cords have been color-coded to simplify connection. Just plug the POSITIVE (+) and NEGATIVE (-) ends of each speaker wire into the corresponding jacks on the rear of the Unit, matching the color tube on the end of the speaker wire to the color-coded connector. 2. Connect each of the speaker wires to the satellite speakers. The front left/right and rear left/right speakers are all the same. However, make sure you connect to the cent
Inhaltszusammenfassung zur Seite Nr. 17
Connections 5. Connecting Other Equipment You can connect other audio and/or video equipment to your unit in different ways. The following illustrations give a few examples of the connection possibilities. Front of Unit Rear of Unit R (Red) (Red) R AUDIO (White) (White) L Camcorder (Yellow) (Yellow) VIDEO (VIDEO/AUDIO cable) VCR (Yellow) (White) (Red) (Red) Sound (White) (VIDEO/AUDIO cable) system (Yellow) Analogue connection AUDIO IN (Red) (Red) R AUDIO (White) (White) L (Yellow) (Yellow) (No n
Inhaltszusammenfassung zur Seite Nr. 18
Connections Mounting rear surround speakers 1) Mark the correct mounting position on the wall. 2) Insert a fixing screw(s) at the marked position on the wall. 3) Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked. Need More Help? DO NOT RETURN THIS TO THE STORE Please call Customer Service at 1-800-252-6123 or visit online help at http://www.1800customersupport.com Turning on the Unit and TV 1)Press the POWER/STANDBY button to turn the Un
Inhaltszusammenfassung zur Seite Nr. 19
Adjusting the Sound To adjust the surround sound balance while Pro Logic decoding is in effect Use the remote control to make the following changes to speaker balance: Front speaker (left) Press the SOUND button repeatedly to display LEFT, then press the or CURSOR button to adjust the sound level. It will show on the display of the Unit. Front speaker (right) Press the SOUND button repeatedly to display RIGHT, then press the or CURSOR button toadjust the sound level. It will show on the
Inhaltszusammenfassung zur Seite Nr. 20
Adjusting the Sound To select the listening channel 1.When the disc is stopped, you can press 5.1 CH and 2.1 CH buttons on the remote control to select different speakers output status shown as below table. 2.You can active or off subwoofer output by setup menu. Note: The wording "2.1 CH" will be corresponded to the audio/sound output from Front Left and Front Right speaker plus the Subwoofer. The following tables show which speakers are working in the various modes. Audio Settings Speakers Outp
