Inhaltszusammenfassung zur Seite Nr. 1
4 CHANNEL DVR
User Manual SDS-P3040
Inhaltszusammenfassung zur Seite Nr. 2
4 Channel DVR User Manual Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or chan
Inhaltszusammenfassung zur Seite Nr. 3
overview overview impor TAnT SAfeTy inSTruCTionS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. ! 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s i
Inhaltszusammenfassung zur Seite Nr. 4
overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER CAuTion SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying t
Inhaltszusammenfassung zur Seite Nr. 5
overview Before STAr T This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices : ! y SAMSUNG retains the copyright on this manual. y This manual cannot be copied without SAMSUNG’s prior written approval. y We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in t
Inhaltszusammenfassung zur Seite Nr. 6
overview operating Temperature The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F). This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one. Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand at room temperature for a period. Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 1
Inhaltszusammenfassung zur Seite Nr. 7
overview ConTenTS 3 Important Safety Instructions overview 5 Before Start ! 7 Contents 9 Features 3 11 Part Names and Functions (Front) 12 Part Names and Functions (Rear) 13 Remote Control 15 Installation ConneCTinG wiTh oTher deviCe 15 Checking the installation environment 16 Connecting the Video, Audio and Monitor 16 Connecting the USB 15 17 Connecting the Camera (SDC-5340BC) 19 Connecting the RS-485 Device 19 Connecting the Network 21 Getting Started Live 23 Live Screen Configuration 28 L
Inhaltszusammenfassung zur Seite Nr. 8
overview 75 Search SeArCh & pLA y 78 Playback 75 80 Introducing Web Viewer weB viewer 81 Connecting Web Viewer (Mac) 82 Using Live Viewer (Mac) 83 Connecting Web Viewer (Windows) 80 84 Using Live Viewer (Windows) 90 Using Search Viewer 94 Viewer Setup 104 About 105 Mobile Viewer 107 SEC Backup Viewer BACKup viewer 107 110 Product Specification (Camera) Appendix 111 Product Specification (DVR) 113 Default Setting 116 Troubleshooting 110 119 Open Source License Report on the Product 8_ overvie
Inhaltszusammenfassung zur Seite Nr. 9
overview feATureS The DVR employs H.264 video encoding for 4 channel inputs and audio encoding for 1 channels while simultaneously supports hard disc recording and playback. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video ! and audio data. y Provides a convenient User Interface y Supports CIF(S)/2CIF(M)/4CIF(L) recording formats y With the network specific codec, network transfer enabled regardless of the recording conditions y D
Inhaltszusammenfassung zur Seite Nr. 10
overview package Contents Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit. package DIGITAL VIDEO RECORDER POWER REC 1 2 AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB 3 4 VIDEO OUT AUDIO OUT VGA DVR (1SET) Adapter (1EA) / Power Cable (1EA) Mouse (1EA) Remote Control (1EA) / Battery (2EA) SDC-5340BC (4SET) Camera Cable (4EA) Camera Power Cable
Inhaltszusammenfassung zur Seite Nr. 11
overview pArT nAmeS And funCTionS (fronT) DIGITAL VIDEO RECORDER ! POWER REC a bc Part Names Functions 1 2 USB Port Connects the USB devices. AUDIO IN a NETWORK DC 12V Remote Control ALARM IN ALARM OUT 1 2 3 4 G 1 COM G Input the remote control signal. b CONSOLE Receiver USB VIDEO OUT AUDIO OUT VGA 3 4 POWER : Displays the power ON/OFF status. LED Indicator c REC : Lights on when recording is in progress. English _11
Inhaltszusammenfassung zur Seite Nr. 12
DIGITAL VIDEO RECORDER overview POWER REC pArT nAmeS And funCTionS (reAr) Sdr-3100 a b c d e f AUDIO IN NETWORK 1 2 DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE 3 4 USB VIDEO OUT AUDIO OUT VGA j i g h Part Names Functions CAMERA IN Video Signal input ports (BNC type connector). a VIDEO OUT Video Signal Output Port (RCA jack). b AUDIO IN Audio input signal port (RCA jack, CH1). c Port to connect a separate earth-grounding cable. Ground d ` Add a separate earth-grounding cable to use your p
Inhaltszusammenfassung zur Seite Nr. 13
overview ` [CONSOLE] is designed for the service repair purpose only. M ` If using the VGA cable, the source from VGA will be displayed as main image on the screen along with the OSD menus. Then, the BNC port will output the video signal alone. If not using the VGA cable, the source from BNC will be displayed as main image on the screen along with the OSD ` menus. If you connect the VGA cable after the system boot, only the video signal from VGA will be displayed. ! remoTe ConTroL SeArCh BA
Inhaltszusammenfassung zur Seite Nr. 14
overview using the numeric buttons 1. Press any button among 1 to 4. 2. Move to the selected channel number. Changing the remote Control id 1. Press the ID button of the remote control and check the ID displayed on the DVR screen. The factory default ID of the remote control is 00. 2. Enter 2 digits of your selection in order, while pressing the system [id] button. 3. When ID input is done, press the system [id] button again to check the setting. ` If you want to change the remote control ID to
Inhaltszusammenfassung zur Seite Nr. 15
ConneCTinG wiTh oTher deviCe connecting with other device inSTALLATion Please take note of the followings before using this product. y Do not use the product outdoor. y Do not spill water or liquid in the connection part of the product. ! y Do not impose the system to excessive shock or force. y Do not pull out the power plug forcefully. y Do not disassemble the product on your own. y Do not exceed the rated input/output range. y Use a certified power cord only. y For the product with an i
Inhaltszusammenfassung zur Seite Nr. 16
+ - RS 485 AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB VIDEO OUT AUDIO OUT VGA connecting with other device ConneCTinG The video, Audio And moniTor Only one mouse port is available. ` M ConneCTinG The uSB 1. By factory default, a USB port is provided for external connection. 2. You can connect a USB HDD, USB memory or mouse to the USB port. 3. If a USB HDD is connected to the system, recognition and settings are available in “main menu > Setting the device > Stor
Inhaltszusammenfassung zur Seite Nr. 17
ConneCTinG wiTh oTher deviCe ConneCTinG The CAmerA (SdC-5340BC) Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime. The camera is suitable for both internal and external use. Please make sure not to fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to ` ! excessive rain or moisture. a b c d e Name Description Camera Fitting Groove that is use
Inhaltszusammenfassung zur Seite Nr. 18
+ - RS 485 AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB VIDEO OUT AUDIO OUT VGA connecting with other device Connecting with dvr installing the camera The camera can be installed on the wall, ceiling, shelf or a desired position using the provided bracket. 1. Select a position where you want to install the camera. ` Make sure the selected position can sustain the weight of the camera. 2. Attach the camera bracket to the wall using the supplied screws. • SDC-5340BC :
Inhaltszusammenfassung zur Seite Nr. 19
ConneCTinG wiTh oTher deviCe + - AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB VIDEO OUT AUDIO OUT VGA RS 485 Back Bone ConneCTinG The rS-485 deviCe Connect the rear [RS-485 +, –] port to the PTZ camera or system keyboard. ` You can connect and control the PTZ camera which supports the RS-485 ! J + communication. RS-485 ` Check if the RS-485 device is compatible with the product first. ` Pay attention not to change the polarity (+/-) of the RS-485 device when conne
Inhaltszusammenfassung zur Seite Nr. 20
+ - RS 485 + - RS 485 AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB VIDEO OUT AUDIO OUT VGA AUDIO IN NETWORK DC 12V ALARM IN ALARM OUT 1 2 3 4 G 1 COM G CONSOLE USB VIDEO OUT AUDIO OUT VGA Phone(ADSL) Line connecting with other device Connecting to the network using the router xDSL or Cable Modem Broadband Router NETWORK xDSL or Cable Modem External Remote PC DDNS Server (Data Center) Connecting to network through AdSL NETWORK RJ-45 Ethernet Cable (Direct Cable) A
