Bedienungsanleitung Pelco DX8100

Inhaltszusammenfassung zur Seite Nr. 1

DX8100 Series
® ®
McAfee VirusScan Plus
™
with SiteAdvisor
Installation Instructions
DX8100
Digital Video Recorder
DX8100
C2642M (4/08)

Inhaltszusammenfassung zur Seite Nr. 2

Description ® ® ™ Pelco, Inc. has developed and tested a plan for implementing McAfee VirusScan Plus with SiteAdvisor 2007. VirusScan Plus provides an additional degree of protection against viruses and can be installed, configured, and activated on your DX8100 digital video recorder (DVR). To ensure correct and effective installation of VirusScan software on the DX8100, read and follow the steps presented in this document. For additional information about configuring and using VirusScan, ref

Inhaltszusammenfassung zur Seite Nr. 3

Configuring Once you have installed VirusScan Plus, the automatic update feature must be disabled. To disable the VirusScan Plus automatic update feature: 1. Exit the DX8100 application and return to the Windows environment. a. From the DX8100 menu bar, choose File > Exit. The “Shut down” dialog box appears. b. Click “Exit to Windows.” c. Click OK. The “Log On to Windows” dialog box appears. d. Enter the Windows password, and then click OK to log on to the operating system. 2. On the taskbar,

Inhaltszusammenfassung zur Seite Nr. 4

3. Click the Advanced Menu button (refer to Figure 2). The Advanced menu appears. Figure 3. Advanced Menu 4. Click the Configure button (refer to Figure 3). The SecurityCenter Configuration page appears. Figure 4. SecurityCenter Configuration 4 C2642M (4/08)

Inhaltszusammenfassung zur Seite Nr. 5

5. In the “Automatic updates are enabled” area, click Off to disable the automatic update feature (refer to Figure 4). The McAfee SecurityCenter message dialog box appears. Figure 5. Disabling Automatic Updates 6. Click Yes (refer to Figure 5). The “Automatic updates are disabled” message appears. Figure 6. Automatic Update are Disabled 7. Do one of the following: • To return to the SecurityCenter home page and perform another task, click the Basic Menu button located in the lower- left col

Inhaltszusammenfassung zur Seite Nr. 6

Uninstalling You can easily uninstall VirusScan Plus using the utility program. NOTE: The DX8100 must be restarted if the VirusScan Plus software is uninstalled. To uninstall VirusScan Plus: 1. From the Windows environment, do the following: a. Go to Start > Settings > Control Panel. The Control Panel dialog box appears. b. Click “Add or Remove Programs.” The Control Panel dialog box appears. 2. Use the Windows add or remove programs utility to uninstall the software. 3. Restart the DX8100 to co

Inhaltszusammenfassung zur Seite Nr. 7

4. Do one of the following: • To return to the SecurityCenter home page and perform another task, click the Basic Menu button located in the lower- left column of the SecurityCenter Configuration page (refer to Figure 4). The SecurityCenter home page appears. • To close the SecurityCenter application: (1) Click the Basic Menu button . The SecurityCenter home page appears. (2) Click Close. • To start the DX8100 application, do the following: (1) On the taskbar, click Start > Programs > DX8100.

Inhaltszusammenfassung zur Seite Nr. 8

Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO9001 Australia Finland France Germany Italy Macau The Netherlands Russia Singapore | | | | | | | | South Africa Spain Sweden United Arab Emirates United Kingdom United States | | | | |