Bedienungsanleitung Snapper 1721302-04

Bedienungsanleitung für das Gerät Snapper 1721302-04

Gerät: Snapper 1721302-04
Kategorie: Autozubehör
Produzent: Snapper
Größe: 1.09 MB
Datum des Hinzufügens: 3/26/2013
Seitenanzahl: 22
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Snapper 1721302-04 zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Snapper 1721302-04 finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Snapper 1721302-04 auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Snapper 1721302-04 im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Snapper 1721302-04 auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Snapper 1721302-04 Handbuch - Online PDF
Advertisement
« Page 1 of 22 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Snapper 1721302-04 Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Snapper 1721302-04 befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

ATTACHMENT
OPERATOR’S
MANUAL
Snow/Dozer
Blade & Hitch
Snow Plow/Dozer Blade
Mfg. No. Description
1693754 42” Remote Angling Snow Plow/Dozer Blade
Hitch
Mfg. No. Description
1693756 Hitch
(for Baron Series, Broadmoor / 1600 / 2600 Series, & Landlord / 1700 / 2700 Series)
1721302-04
Rev 1/2001
TP 100-2356-04-AT-SMA

Inhaltszusammenfassung zur Seite Nr. 2

Table of Contents Recommended Accessories ..............................1 Adjustments.........................................................7 Skid Shoe Adjustment .....................................7 Safety Rules & Information Spring Tension.................................................7 General Warnings............................................2 Lift Height Adjustment .....................................8 Operating on Slopes........................................2 Downward Pressure A

Inhaltszusammenfassung zur Seite Nr. 3

Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed. PREPARATION GENERAL WARNINGS Know the tractor controls and how to stop quickly. Disengage the PTO before making any adjustments. READ THE TRACTOR OPERATOR’S MANUAL.

Inhaltszusammenfassung zur Seite Nr. 4

Features & Controls B CONTROL FUNCTIONS A The information below briefly describes the function of individual controls. Operating the tractor and dozer require the combined use of these controls and additional controls whose operation is described in the tractor Operator’s Manual. Please take a moment and familiarize yourself with the name, location, and function of these controls so that you will better understand the safe- ty and operating instructions provided in this manual. Figure 1. Contr

Inhaltszusammenfassung zur Seite Nr. 5

General Operating Instructions Checks Before Starting WARNING 1. Refer to the Maintenance & Adjustments sections of Perform the Safety System Interlock test found in this manual and perform any needed service. Also, your tractor Operator’s Manual. If tractor does not refer to the tractor Operator’s Manual and perform pass the test, do not operate the tractor. See your any required service. authorized dealer. Under no circumstances should you attempt to defeat the safety system. 2. Remove any obj

Inhaltszusammenfassung zur Seite Nr. 6

General Operating Instructions Changing Angle of the Blade: Snow Plowing Tips See Figure 1 for location of Controls.  Determine the best snow removal pattern before beginning. NOTE: It is easier to change the angle of the blade with the attachment raised.  Plan the pattern so that you avoid pushing snow onto cleared areas. 1. Raise the attachment lift.  When land contour permits, it is best to travel in the 2. Use an abrupt pushing/pulling motion to release the longest direction to minimize

Inhaltszusammenfassung zur Seite Nr. 7

Maintenance WARNING Lubricate Dozer Blade To avoid serious injury, perform maintenance on Lubricate the dozer blade as shown in Figure 2. Where the tractor or dozer blade only when the engine is an oil can is shown, wipe the area clean, apply a few stopped, parking brake is set and all moving parts drops of oil (SAE 30), then wipe up drips or spills. have stopped. Always remove the ignition key In general, linkage connections and other parts that have before beginning maintenance or adjustments

Inhaltszusammenfassung zur Seite Nr. 8

Adjustments Skid Shoe Adjustment Slotted holes are provided to permit adjustment of the shoe assemblies for raising and lowering the blade to various working heights (see Figure 3). When cleaning snow from gravel or earth drives or walks, the shoe assemblies should be lowered fully to prevent blade contact with gravel or ground. When cleaning smooth hard surfaces like concrete, the shoe assemblies are normally placed fully up to allow the blade to scrape the surface. To adjust the skid, raise th

Inhaltszusammenfassung zur Seite Nr. 9

Adjustments Lift Rod Adjustment ELECTRIC/HYDRAULIC LIFT MODELS: D In the fully raised position the blade should be 6” off the C ground. In the fully lowered position, the lift rod should B slightly compress the spring creating downward pres- sure on the blade. A NOTE: Always adjust the lift height before and after adjusting the downward pressure. MANUAL LIFT MODELS The lift lever can be placed in one of three notches and E is held in position by the lever latch. (see Figure 7). When the lev

Inhaltszusammenfassung zur Seite Nr. 10

Initial Setup & Assembly 1 4 5 4 3 6 4 2 4 3 8 9 7 10 29 28 11 12 27 2 26 25 22 24 23 10 21 20 19 15 18 17 13 15 14 16 Figure 8. Ref Qty Description Ref Qty Description 1 1 ROD, Control Handle, Upper 16 6 NUT, Hex, 3/8-16 2 6 NUT, Hex, 5/16-18 17 2 SKID SHOE 3 2 LOCKWASHER, 5/16 18 4 WASHER, Plain, 3/8 4 4 WASHER, 5/16 19 4 CAPSCREW, 3/8-16 x 3/4 5 2 CAPSCREW, 5/16-18 x 1-1/4 20 2 CAPSCREW, 1/2-13 x 1-1/2 6 1 ROD, Control Handle, Lower 21 2 SPACER, 1/2 ID x 3/4 OD x 5/16 LG 7 1 CLEVIS 22 1 ROD,

Inhaltszusammenfassung zur Seite Nr. 11

Initial Setup & Assembly 33 39 40 34 NOTE: The dashed-line rod: 37 35 Landlord/1700/2700-This rod 41 is part of the tractor. 36 37 Broadmoor/1600/2600-This 2 rod is the cross-shaft of the 1 manual lift lever 37 42 32 43 43 38 9 11 7 9 3 4 10 14 6 8 15 5 3 4 12 13 16 9 9 28 17 29 31 19 20 18 27 21 28 30 26 25 24 9 22 23 Figure 9. Push Bar, Hitch, & Lift Rod Components Ref Qty Description Ref Qty Description Ref Qty Description 1 2 STOP, Bar 17 1 PUSH BAR ASSY, Rear 33 1 EYEBOLT, 1/4-20 x 1-1/2 2

Inhaltszusammenfassung zur Seite Nr. 12

Initial Setup & Assembly Figure 10. Bar Stop A. Bar Stops Figure 11. Tension Springs B. Taptite Screws, 5/16-18 x 1 A. Eyebolt D. Pivot Frame B. Nut, 5/16 E. Nut, 5/16 C. Spring INITIAL SETUP & ASSEMBLY NOTE: Some of the following setup procedures may already be completed. Assemble Blade 1. Place the blade on a flat surface. 2. Baron/Broadmoor/LT/1600/2600 Series: See Figure 10. Install one bar stop (A) using the two 5/16-18 x 1 taptite screws (B). Do not install second bar stop. Landlord/GT/1

Inhaltszusammenfassung zur Seite Nr. 13

Initial Setup & Assembly Install Rear Push Bar Support NOTE: Manual Lift Models-If your tractor is not already equipped with a Large Lift Lever kit, install it at this time. Follow the instructions supplied with the kit. 1. Assemble the push bar support (A, Figure 12) and F hitch (F) using the hardware shown in Figure 12. Do not tighten the 5/8-11 nuts (B & E). A B Install Hitch C CONNECT TO FRONT OF TRACTOR D 1. Increase front tire pressure to 20 psi (138 kPa) to E compensate for added weight

Inhaltszusammenfassung zur Seite Nr. 14

Initial Setup & Assembly B A C Landlord / 1700 / 2700 Viewed from Right Side B B B C A A C Broadmoor / 1600 / 2600 Viewed from Left Side Landlord / 1700 / 2700 Viewed from Left Side B Figure 14. Installing Hitch to Rear Bracket CONNECT HITCH TO REAR PUSH BAR A. Push Bar Support C. Lift Rod/Lever 1. Slide the push bar support (A, Figure 14), and wash- B. Washers ers (B), onto the lift lever rod/lever (C), and secure to tractor frame with the spring clips. 2. Hand tighten the rear 5/8-11 nut (B, F

Inhaltszusammenfassung zur Seite Nr. 15

Initial Setup & Assembly Install Spring Assist Bracket D (Baron/Broadmoor/1600/2600 Models Only) NOTE: Spring-assist bracket assembly (Figure 16) does not need to be installed on units with electric/hydraulic lift. 1. Install the spring-assist bracket (A, Figure 16) to trac- tor frame (bracket is mounted underneath frame). Secure with capscrew (from top), lockwasher, and nut. Place clevis pin (B) through bracket and install flat washer, chain (C), second flat washer, and safety clip (D). 2. Rai

Inhaltszusammenfassung zur Seite Nr. 16

Initial Setup & Assembly B C D C B A A Figure 20. Lift Rod Assembly Figure 19. Lift Rod Assembly A. Rod Guide A. Set Collars C. Spring B. Push Bar Lift Arm B. Rod Guide D. Lift Rod C. Spring Clip Install Lift Rod B NOTE: Two lift rods are packaged with the Broadmoor/LT/1600/2600 & Landlord/GT/1700/2700 hitch assembly. Use the correct lift rod for manual or D hydraulic lift as shown in Figure 9. 1. Assemble lift rod per Figure 19. 2. Insert prong of rod guide (A, Figure 20) through hole in upri

Inhaltszusammenfassung zur Seite Nr. 17

Initial Setup & Assembly Install Angling Control Rod NOTE: If installing the dozer attachment on a unit B A equipped with a snowcab, replace the control rod sup- port (A, Figure 23) with the hanging support (Ref. No. 40, D Figure 9). Mount the hanging support to the front cab cross-bar. D E 1. Remove and discard the front two ratchet fasteners from the right foot rest pad. Drill out the holes using E a 3/8” drill (Figure 23). Drill out to 3/8” 2. Set the angling control support (A, Figure 23)

Inhaltszusammenfassung zur Seite Nr. 18

Removing & Attaching the Hitch & Blade A B B C E D F F Figure 25. Dozer Removal A. Support Arm C. Pivot Pin E. Clevis Pin B. Hair Pin Clip D. Hair Pin Clip & Washer F. Clevis Pins REMOVAL & INSTALLATION Removing & Attaching Dozer Blade 5. Raise the push bar and remove pin (E) securing the 1. Lower the blade. Put the lift lever in the middle notch chain to the chain bracket. (float position). 6. Lower the lift and remove the clip (B) securing the lift 2. Remove the hair pin clip and washer (D,

Inhaltszusammenfassung zur Seite Nr. 19

Removing & Attaching B A B A A C C D Figure 26. Installing Hitch to Front of Tractor A Safety Clip C. Tractor Brackets Figure 28. Hitch Removal - Landlord/1700/2700 B. Hitch Bar D. Hitch Pin A. Hair Pin Clips C. Rear Hitch Bracket B. Lift Pivot Rod B A D A C E A Viewed from Right Side of Tractor Figure 27. Hydraulic Lift Bracket Figure 29. Hitch Removal - A. Lift Lever Ext. Assy D. Spring Clip Baron/Broadmoor/1600/2600 Series B. Lift Arm E. 3/8 Mower Pin A. Hair Pin Clips C. Clevis Pin Removin

Inhaltszusammenfassung zur Seite Nr. 20

Reinforcement Bracket Installation INSTALL REINFORCEMENT C A D B BRACKET E NOTE: This kit applies to the Landlord / 1700 / 2700 Series hydraulic lift models only. 1. Loosen the four capscrews (A, Figure 32) securing the quadrant (B) to the footrest. 2. Insert the reinforcement bracket (B, Figure 31) between the quadrant (B, Figure 32) and foot rest. Align the hole in the bracket with the square hole (A, Figure 33) in the frame. 3. Secure the bracket (B, Figure 31) to the frame using Figure 31.


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Snapper 1600364 Handbuch Autozubehör 0
2 Snapper 1693754 Handbuch Autozubehör 0
3 Snapper Front Implement Lift Kit 1691195 Handbuch Autozubehör 0
4 Snapper 1693756 Handbuch Autozubehör 0
5 Sony RM-X32 Handbuch Autozubehör 2
6 Sony MV-100CAR Handbuch Autozubehör 1
7 Sony DC-FX1 Handbuch Autozubehör 0
8 Sony RM-X33 Handbuch Autozubehör 13
9 Sony RM-X38 Handbuch Autozubehör 3
10 Sony DCC L50 Handbuch Autozubehör 1
11 Sony CDX-T69X Handbuch Autozubehör 4
12 Sony 9 Handbuch Autozubehör 1
13 Sony RM-X1S Handbuch Autozubehör 156
14 Sony PEGA-CC5 Handbuch Autozubehör 1
15 Philips CID3287 Handbuch Autozubehör 0