Inhaltszusammenfassung zur Seite Nr. 1
BN68-00263B-cover 1/12/06 12:31 PM Page 3
Owner’s Instructions
HPL5025
Inhaltszusammenfassung zur Seite Nr. 2
BN68-00263B-1 1/12/06 10:52 AM Page 2 Warning! Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. N
Inhaltszusammenfassung zur Seite Nr. 3
BN68-00263B-1 1/12/06 10:52 AM Page 3 Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung product represents the latest in television technol- ogy. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. Important Safety Information Always be careful when using your Monito
Inhaltszusammenfassung zur Seite Nr. 4
BN68-00263B-1 1/12/06 10:52 AM Page 4 •Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience recepta- cles, and the point where they exit from the unit. • Unplug the Monitor from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to th
Inhaltszusammenfassung zur Seite Nr. 5
BN68-00263B-1 1/12/06 10:52 AM Page 5 FCC Information User Instructions Warning The Federal Communications Commission Radio User must use shielded signal interface cables to Frequency Interference Statement includes the fol- maintain FCC compliance for the product. lowing warning: Provided with this monitor is a detachable power NOTE: This equipment has been tested and found supply cord with IEC320 style terminations. to comply with the limits for a Class B digital It may be suitable for con
Inhaltszusammenfassung zur Seite Nr. 6
BN68-00263B-1 1/12/06 10:52 AM Page 6 Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.The images displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature,and con- stantly moving.Displaying stationary graphics and images on screen,such as the
Inhaltszusammenfassung zur Seite Nr. 7
BN68-00263B-1 1/12/06 10:52 AM Page 7 Table of Contents Setup Connecting PC and Operation Your New Plasma Display Panel ........................10 Connecting to a PC..........................................44 Remote Control Buttons ....................................12 Adjusting the PC Screen ..................................48 Wall Installation Instructions ..............................14 Changing the Position of the Image....................49 Turning the PDP On and Off.................
Inhaltszusammenfassung zur Seite Nr. 8
BN68-00263B-1 1/12/06 10:52 AM Page 8
Inhaltszusammenfassung zur Seite Nr. 9
BN68-00263B-1 1/12/06 10:52 AM Page 9 PLASMA DISPLA Y P ANEL Setup Your New Plasma Display Panel ....................................................10 Remote Control Buttons ................................................................12 Wall Installation Instructions ..........................................................14 Turning the PDP On and Off ..........................................................18
Inhaltszusammenfassung zur Seite Nr. 10
BN68-00263B-1 1/12/06 10:52 AM Page 10 Your New Plasma Display Panel Front Panel Speakers POWER SOURCE, MENU, VOLUME (-,+), Remote Control Signal Receiver Press to turn Aim the remote control towards SELECT (▼,▲), MUTE the PDP on this spot on the Monitor. and off. Checking Parts Power Cord Remote Control/ PC Cable Ferrite Cores (7EA) AAA Batteries S-VIDEO Video/Audio Owner’s Cable Cable Instructions 10
Inhaltszusammenfassung zur Seite Nr. 11
BN68-00263B-1 1/12/06 10:52 AM Page 11 Rear Panel ŒExternal Speaker Out jacks ˆS-Video Input jack Connect external speakers. Connect a S-Video signal from an S-VHS VCRs or DVD players. ´RGB Input 1 jack (15pin) ØAudio Input (Video/Component/PC) jacks Connect to the video output jack on your PC. Connect a audio signal from external sources ˇRGB Input 2/Component Video Input jacks like VCRs, PC or DVD players. (H/V/R/G/B, Y/Pb/Pr) ∏RS-232C Input jack RGB input2/Component video input jacks are C
Inhaltszusammenfassung zur Seite Nr. 12
BN68-00263B-1 1/12/06 10:53 AM Page 12 Remote Control Buttons Flip the cover open in the arrow direction. Remote Control ŒPower button Turns the PDP on and off. ´Number buttons ˇDisplay button Press to display information on the PDP screen. ¨Menu button Displays the main on-screen menu. ˆCH (Channel) and VOL (Volume) buttons Channel and Volume buttons are used for selecting menu item in menu mode. ØMute button Press to mute the PDP sound. ∏P.Mode button Adjust the PDP picture by selecting on
Inhaltszusammenfassung zur Seite Nr. 13
BN68-00263B-1 1/12/06 10:53 AM Page 13 ıVCR control buttons Controls VCR tape functions: Stop, Rewind, Play/Pause, Fast Forward. ˜SET button S.Sel Use during setting up of this remote control, so that it will work compatibly with other devices (VCR, cable box, DVD, etc.) ¯Clock set button Press to clock setting. ˘PIP control buttons Source : Press to select one of the available signal sources for the PIP window. S.Sel : Press to select the Audio (PIP or Main). Locate : Press to move the PIP w
Inhaltszusammenfassung zur Seite Nr. 14
BN68-00263B-1 1/12/06 10:53 AM Page 14 Wall Installation Instructions Installation Notes Do not install the PDP on any place other than vertical walls. 1 To protect the performance of the PDP and prevent troubles, avoid the following. 2 • Do not install next to smoke and fire detectors. • Do not install in an area subjected to vibration. • Do not install in an area subjected to high voltage. • Do not install near or around any heating apparatus. Use only recommended parts and components. 3
Inhaltszusammenfassung zur Seite Nr. 15
BN68-00263B-1 1/12/06 10:53 AM Page 15 Installing the Display on the Wall Attachment Panel See the drawing of the wall attachment panel shown in page 14 to check for the stability of the wall where the PDP is to be installed. If the wall is not 1 enough strong to support the PDP, strengthen the wall before installation. Fix the wall attachment panel on the wall using bolts as shown in the following figure: Fixing bolts must protrude from the wall appox. 0.6 inches. 2 Using the wall attac
Inhaltszusammenfassung zur Seite Nr. 16
BN68-00263B-1 1/12/06 10:53 AM Page 16 Remove six large screws from the rear side of the display. 4 Insert the bolts, dish-type washers, and insulation holder into the six screw- holes as shown in the following figure: 5 Œ Bolt ´ Insulation holder Hang the protruding plastic part on the rear of the PDP up the groove on the top of the wall attachment panel. Then, lift down the PDP. 6 (Do not lift down the PDP with too much force. The protruding plastic part might be taken off.) Œ ´
Inhaltszusammenfassung zur Seite Nr. 17
BN68-00263B-1 1/12/06 10:53 AM Page 17 Separating the Display from the Wall Attachment Panel After lifting the PDP up, pull it forward and remove it from the wall attachment panel. Œ ´ 17
Inhaltszusammenfassung zur Seite Nr. 18
BN68-00263B-1 1/12/06 10:53 AM Page 18 Turning the Monitor(PDP) On and Off Turning the Monitor(PDP) On and Off Press the Power button on the remote control. The PDP will be turned on and you will be ready to use it’s features. You can also use the Power button on the front of the PDP. Notes: • If your Monitor isn’t turned on when the power button is pressed: Press the MODE button to check if the Monitor mode has been chosen ( ). Viewing the Menus and Displays Your PDP has a simple, easy-t
Inhaltszusammenfassung zur Seite Nr. 19
BN68-00263B-1 1/12/06 10:53 AM Page 19 Displaying Status Information Press the Display button on the remote control. The PDP will display the Screen size, Resolution, Current time, and screen DISPLAY mode. Main : Video SUB : Not Available P.MODE : Custom Scaling : Wide S.MODE : Custom Resolution : 720 X 480 60Hz Displaying Clock Press the Clock Display button on the remote control. The Current time will be displayed on the screen. 10 : 30 AM 19
Inhaltszusammenfassung zur Seite Nr. 20
BN68-00263B-2 1/12/06 11:17 AM Page 20
