Inhaltszusammenfassung zur Seite Nr. 1
V7
Inhaltszusammenfassung zur Seite Nr. 2
Record of Revisions Reference numbers are shown at the bottom left corner on the back cover of each manual. Printing Date Reference No. Revised Contents September, 2002 2010NE0 First edition
Inhaltszusammenfassung zur Seite Nr. 3
Inhaltszusammenfassung zur Seite Nr. 4
Preface Thank you for selecting the MONITOUCH V7 series. For correct set-up of MONITOUCH, you are requested to read through this manual to understand more about the product. For more information about the V7 series, refer to the following related manuals. Manual Name Contents Reference No. Reference Manual (Operation) The V-SFT operating procedure is described. 1043NE Reference Manual (Function) The functions and instructions of the V7/V6 series are 1044NE explained. Universal Serial Connection
Inhaltszusammenfassung zur Seite Nr. 5
Notes on Safe Use of MONITOUCH In this manual, you will find various notes categorized under the following levels with the signal words “DANGER,” and “CAUTION.” Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in CAUTION minor or moderate injury and could cause property damage. Note that there is a possibility that the item listed with may have serio
Inhaltszusammenfassung zur Seite Nr. 6
CAUTION [Notes on System Design] • Never bundle control cables and input/output cables with high-voltage and large-current carrying cables such as power supply cables. Keep these cables at least 200 mm away from the power supply or high-voltage cables. Otherwise, malfunction may occur due to noise. • For use in a nuclear energy facility, or other facility of such official importance, please consult your local distributor. [Notes on Installation] • Operate (or store) MONITOUCH under the cond
Inhaltszusammenfassung zur Seite Nr. 7
CAUTION [Notes on Maintenance and Operation] • Hakko Electronics Co., Ltd. is not responsible for any damages resulting from repair, overhaul or modification of MONITOUCH that was performed by an unauthorized person. • Do not use thinners for cleaning because they may discolor the MONITOUCH surface. Use alcohol or benzine commercially available. • Do not use a sharp-pointed tool when pressing a touch switch. • Only experts are authorized to set up the unit, connect the cables or perform maint
Inhaltszusammenfassung zur Seite Nr. 8
Contents Chapter 1 Hardware Specifications 1. Features .......................................................................................................................... 1-1 2. Models and Peripheral Equipment .................................................................................. 1-2 MONITOUCH Models .................................................................................................................. 1-2 Peripheral Equipment .......................................
Inhaltszusammenfassung zur Seite Nr. 9
12. Modular Jack (MJ1/MJ2)................................................................................................1-29 Modular Jack 1 (MJ1)/2 (MJ2) ................................................................................................... 1-29 V-SFT Setting ............................................................................................................................ 1-30 Transferring Screen Data.......................................................................
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 3 Serial Communications 1. 1 : 1 Connection .............................................................................................................. 3-1 1 : 1 Connection........................................................................................................................... 3-1 Wiring........................................................................................................................................... 3-2 V-SFT Setting .........................
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 4 Network Communications 1. Ethernet ...........................................................................................................................4-1 Ethernet ....................................................................................................................................... 4-1 Notes on Ethernet Communications ............................................................................................ 4-3 IP Address for the V7 Series.....................
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 5 Connection to PLCs 1. MITSUBISHI PLC............................................................................................................ 5-1 Available PLCs............................................................................................................................. 5-1 Communication Setting................................................................................................................ 5-4 A Series Link, QnA Series Link: Switch Setting.............
Inhaltszusammenfassung zur Seite Nr. 13
8. Toyopuc PLC .................................................................................................................5-55 Available PLCs........................................................................................................................... 5-55 Communication Setting.............................................................................................................. 5-55 Switch Setting ........................................................................
Inhaltszusammenfassung zur Seite Nr. 14
16. SHINKO PLC................................................................................................................. 5-98 Available PLCs........................................................................................................................... 5-98 Communication Setting.............................................................................................................. 5-98 Available Memory ......................................................................
Inhaltszusammenfassung zur Seite Nr. 15
25. TAIAN PLC ..................................................................................................................5-124 Available PLCs......................................................................................................................... 5-124 Communication Setting............................................................................................................ 5-124 Available Memory .......................................................................
Inhaltszusammenfassung zur Seite Nr. 16
Hardware Specifications 1. Features 2. Models and Peripheral Equipment 3. System Composition 4. Specifications 5. Dimensions and Panel Cut-out 6. Names and Functions of Components 7. Mounting Procedure 8. Power Supply Cable Connection 9. Coin-type Lithium Battery 10. DIP Switch Setting 11. Serial Connector (CN1) 12. Modular Jack (MJ1/MJ2) 13. 10BASE-T (LAN) 14. CF Card (CF) 15. Printer Connection (PRINTER)
Inhaltszusammenfassung zur Seite Nr. 17
Inhaltszusammenfassung zur Seite Nr. 18
Hardware Specifications 1. Features 1-1 1 1. Features The V7 series inherits and heightens the features of the V6 series as described below. 1. 32k-color Display 32,768-color display makes colorful expression possible. Bitmap files are clearly displayed in brilliant colors. 2. CF Card Interface as Standard The CF card can be used for saving multiple screen data, sampling data, recipe data, hard copy images, and other various usages. Large-sized video capture images, JPEG or WAV files can be
Inhaltszusammenfassung zur Seite Nr. 19
1-2 2. Models and Peripheral Equipment 2. Models and Peripheral Equipment MONITOUCH Models The model name consists of the following information. V 7 Power supply specification D: 24 VDC specification (in compliance with CE/UL/cUL) None: 100-240 VAC specification Device specification S: TFT color LCD (SVGA) T: TFT color LCD (VGA) C: STN color LCD (VGA) Functional specification i: High-performance type None: Standard type Screen size 08: 8-inch 10: 10-inch 12: 12-inch
Inhaltszusammenfassung zur Seite Nr. 20
Hardware Specifications 2. Models and Peripheral Equipment 1-3 The following models are available. 1 Series and Model Specifications Remarks Size Name V708SD TFT color, 800 × 600 dots, standard, DC power supply Compliant with CE/UL/cUL V708 series V708iSD TFT color, 800 × 600 dots, high-performance, DC power Compliant with CE/UL/cUL 8-inch supply V708CD STN color, 640 × 480 dots, standard, DC power supply Compliant with CE/UL/cUL V710T TFT color, 640 × 480 dots, standard, AC power supply V710TD
