Inhaltszusammenfassung zur Seite Nr. 1
PLASMA TV
OWNER'S MANUAL
MODELS :42EP25BAT
42EP25SAT
42HP25BAT
42HP25SAT
50HP25BAT
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Inhaltszusammenfassung zur Seite Nr. 2
WARNING RISK ELECTRIC SHOOK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th pr
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference. 2)All warning on the appliance and in the operating instructions should be followed. 3)Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or aerosol clean
Inhaltszusammenfassung zur Seite Nr. 4
b.If liquid has been spilled, or objects have been fallen into the unit. c.If the unit has been exposed to rain or water. d.If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.
Inhaltszusammenfassung zur Seite Nr. 5
Introduction Contents Timer Menu Warnin g . . . . . . . ... ... ... ... .. . . . . . . . . . . . . . . . . . . . . . . . Date /Time setting................................................... Saf ety I nst ruc tio ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... Timer on setting...................................................... Introduction Timer off setting...................................................... Con tro ls . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 6
Introduction Controls -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front panel controls 42EP25BAT 42HP25BAT 42EP25SAT 42HP25SAT 1.EXIT clears all on-screen displays and returns to TV viewing from any menu. 2.INPUT: all input source display and OK confirm. 3.CH(+/-) Program plus and minus, menu options 4.VOL(+/-) Volume increase and decrease, menu reset and entry 5.MENU Menu display EXIT INPUT CH- CH+ VOL- VOL+ MENU 6. POWER : Pow
Inhaltszusammenfassung zur Seite Nr. 7
Introduction Connection Options Back panel controls 42EP25BAT 42HP25BAT 42EP25SAT 42HP25SAT Antenna Input Digital Audio Output Connect cable or Connect digital audio antenna signals to S-Video Input from various types of the TV, either directly Connect S-Video or through your equipment. Note: In Audio input out from cable box. standby mode, for linking PC audio an S-VIDEO AUDIO output these ports will not device to the S-VIDEO output terminals. work. input. Y Pb Pr L R R L V L R R F
Inhaltszusammenfassung zur Seite Nr. 8
EXIT INFO ARC NPUT Introduction Universal Remote Controller - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. TV DVD VCR SETBOX CABLE AUDIO Function introduction Press the SELECT button repeatedly to select one of the system modes in which the remote control can be used. When the desired device is selected, the corresponding POWER LED lights on 5seconds. Turns your TV or any othe
Inhaltszusammenfassung zur Seite Nr. 9
EXIT EXIT INFO INFO ARC ARC T NPU NPUT Accessories 42EP25BAT 42HP25BAT 42EP25SAT 42HP25SAT CH.LIST FAV.LIST AUDIOLIST SEL E C T PIP SWAP AUDIO SWAP POSITION PLASMA TV P.MODE S.MODE CC FREEZE OWNER'S MANUAL OK VOL+ CH+ VOL- CH- Q.VIEW Power cable Remote controller Owner`s manual ( Alkaline battery(AAA) 2 Speaker unit(X2) Connection cord M4X12Screwsx8 M5X16Screwsx4 Brace pole x2 Standx1 50HP25BAT CH.LIST FAV.LIST AUDIOLIST SE L E CT PIP SWAP AUDIOSWAP POSITION PLASMA TV P.MODE S.MODE OWNE
Inhaltszusammenfassung zur Seite Nr. 10
Install the Speakers(42EP25BAT/42HP25BAT/42EP25SAT/42HP25SAT) 1 Face the PDP screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. (See figure), Íâ¹ÒÑïÉùÆ÷ʹÓÃ˵Ã÷ lay the two speaker aside of the PDP. 2 Insert the pothook to the faucet of the PDP screen . 3 Fix the speaker to the PDP with the screws 4-ST 4X16 . \U+2592\U+255A\U+2514\U+00B2 25.400 Before turning on the PDP , ensure you have connected the line between the speaker and the
Inhaltszusammenfassung zur Seite Nr. 11
Install the Stand Insert the supporting bracket with 8 M4x12 screws to the installation holes on the bottom of the soleplate. Fasten the Supporting bracket and the Soleplate as shown in figure. Install the Stand to the PDP Face the PDP screen upside down on a clean blanket or the bracket and pay attention not to indent the casing. Lay down the stand and put it to responding position of the PDP screen ,and make sure the brace pole towards the hole of the PDP . Fix 2 PDP brace pole to the PDP
Inhaltszusammenfassung zur Seite Nr. 12
Installation - The TV can be installed in various ways such as on a wall, or on a desktop etc. - The TV is designed to be mounted horizontally. GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection Genera
Inhaltszusammenfassung zur Seite Nr. 13
Installation External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR connection - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection Opt
Inhaltszusammenfassung zur Seite Nr. 14
Installation External Equipment Connections External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). L R R L V R F INPUT S-Video CVBS S-Video/CVBS How to use AV OUT Audio In 1. Select the input source with using the INPUT button on the
Inhaltszusammenfassung zur Seite Nr. 15
Installation External Equipment Connections DTV connection - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i). How to connect Use the TV`s (Y, PB, PR) , VGA or HDMI jack for video connections,
Inhaltszusammenfassung zur Seite Nr. 16
Installation External Equipment Connections PC connection How to connect 1. To get the best picture quality, adjust the PC graphics card to (1024 x768). 2. Use the TV`s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of eitherVGA IN or DVI IN to display the PC on the TV. If the graphic card on the PC does output analog and digital R
Inhaltszusammenfassung zur Seite Nr. 17
Installation External Equipment Connections Monitor Out Setup The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TV`s AV OUT. L R R L V See the Operating Manual of the second TV or monitor for further R F INPUT AUDIO OUT AV OUT details regarding that device`s input settings. Notes: YPbPr, VGA, HDMI,DTV input sources cannot be used for Monitor out. When connecting with external audio equipmen
Inhaltszusammenfassung zur Seite Nr. 18
Installation HDMI TM - HDMI , the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing." - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). - This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolution. - When you connect this TV with a source device(DVD player, Set Top Box or PC) supporting Auto HDMI/DVI function, the ou
Inhaltszusammenfassung zur Seite Nr. 19
Installation Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Analog Audio Cable (Stereo to RCA type) (not supplied with the product) Owner s Manual 19
Inhaltszusammenfassung zur Seite Nr. 20
Installation External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. L R YPbPr Headphone S-VIDEO Audio In out Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphone
