Inhaltszusammenfassung zur Seite Nr. 1
KCL8807DT
INSTRUCTION MANUAL
Contents
Warnings & Precautions 2
Important Safety Instructions 3
What’s in the Box & Features 4
Mounting the Unit & Powering the Unit 5
Setting the Clock 6
Connecting to a TV Signal 7
AM / FM Radio & Station Presets 8
Setting the Timer 9
Audio & Video Inputs 10
Special Features 11
Controls & Definitions 12-18
Contact Information 20
Inhaltszusammenfassung zur Seite Nr. 2
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the WARNING: Use of this unit near fluorescent unit, is intended to alert the user to the presence of lighting may cause interference regarding use of the uninsulated “dangerous voltage” within the product’s remote. If the unit is displaying erratic behavior enclosure that may be of sufficient magnitude to move away from any fluorescent lighting, a
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1. Read these instructions. All the safety Use only with a cart, stand, tripod, bracket, Electrical Code, ANSI/NFPA 70, provides in- and operating instruction should be read or table recommended by the manufacturer, formation with regard to proper grounding of before the product is operated. or sold with the product. Any mounting of the mast and supporting structure, grounding the product should follow the manufacturer’s of the lead-in wire to an antenna connecti
Inhaltszusammenfassung zur Seite Nr. 4
What’s in the Box UnderCabinet LCD TV 4-Spacers and 4 Screws Remote Control • UnderCabinet LCD TV • Remote Control • Mounting Template • 4 - Screws • 4 - Spacers • Documentation Features • Adjustable LCD TV Screen • sets of Audio/Video Input Jacks • 181-Channel Cable-Ready Tuner • Dual Front-Firing Speakers Built-In • Digital TV Tuner built in • FM Wire Antenna • Digital Tune AM/FM Stereo Radio with • AC Powered, Built-In AC Line Cord Station Presets • Battery Back-Up for clock only. • LCD
Inhaltszusammenfassung zur Seite Nr. 5
Mounting the Unit To mount the unit under a cabinet, follow the directions on the included Mounting Template. Powering the Unit TV ANT DC 12V VIDEO IN AUDIO IN AC~ FM ANT R L AC 10V / 60Hz 1. To power the unit, simply connect it to an AC outlet using the attached AC cord. . The plastic extensions on the back of the unit provide a holder for excess cord. 5
Inhaltszusammenfassung zur Seite Nr. 6
Setting the Clock 1. Plug the unit into a standard 10V outlet. See “Powering the Unit” on page 2. . Before pressing the Standby Button, press and hold the Mem/Clock Adj. Button for seconds. AM . Use the Tune/Clk Buttons to choose between 12HR and 24HR. Press the Mem/ Clock Adj. Button to make the selection. The hour number will blink to indicate that it is being changed. 4. Use the Tune/Clk Buttons to choose the current hour. Press the Mem/Clock Adj. Button to make the selection
Inhaltszusammenfassung zur Seite Nr. 7
Connecting to a TV signal The unit has a 181 Channel Cable-Ready TV Tuner and Digital (HD) TV Tuner. The Digital TV Tuner will only work with a TV ANT connected HD TV Antenna. DC 12V DC 12V V VIDEO IN IDEO IN AUDIO IN AUDIO IN A AC~ C~ FM FM ANT ANT R R L L 1. Connect an Off Air Antenna or Cable TV Coaxial to the TV Antenna Input. . Turn the unit on by pressing the Standby Button. L L AUDIO IN AUDIO IN R R VIDEO IN VIDEO IN . Lower the LCD TV Screen, and rotate it vertically until it i
Inhaltszusammenfassung zur Seite Nr. 8
Tuning the AM & FM Radio & Creating Station Presets 1. Turn the unit on by pressing the Standby Button. Radio Mode . Press the Radio Button to switch to Radio Mode. RADIO MEM . Press the Band Button to select AM or FM MHz radio band. FM 4. Press the Tune/Clk Buttons to tune the radio. Creating Station Presets 5. Press and hold the Memory/Mem/Clock Adj. Button. The Memory Preset Number will blink to indicate that it can be changed. Memory Preset Number 6. Press the Tune/Clk Buttons to a
Inhaltszusammenfassung zur Seite Nr. 9
Setting the Timer to Turn the Unit On or Off 1. Press the Timer Button consecutively to change the timer in 10 minute intervals Timer On starting at 40. Press the Tune/Clk Buttons to change the timer one minute at a time. . After the allotted time has expired, an alarm will sound. Press the Standby Button to turn the alarm off. TIMER . To cancel the timer before the time has expired, press and hold the Timer Button. Timer Off TIMER VOLUME VOLUME TIMER TUNE/CLK MEM/CLOCK MEM/CLOCKA ADJ
Inhaltszusammenfassung zur Seite Nr. 10
Audio/Video Input: from a DVD Player or Set-Top Box When connecting two products using an RCA Cable, match the colored ports with the same colored connection. (Red to Red, White to White, and Yellow to Yellow) 1. Connect an RCA Cable to the Audio/Video Inputs on the unit and the audio/video outputs on the DVD Player or Set-Top Box. (RCA Cable not included) . Turn the unit on by pressing the Standby Button. . Press the AV Input Button. 4. Audio and video played through the connected DVD Play
Inhaltszusammenfassung zur Seite Nr. 11
AA A A LCD Swivel Screen Opening the LCD TV Screen L L AUDIO IN AUDIO IN R R VIDEO IN VIDEO IN L L AUDIO IN AUDIO IN R R VIDEO IN VIDEO IN L L AUDIO IN AUDIO IN R R VIDEO IN VIDEO IN Swiveling the LCD TV Screen Battery Backup Use AAA Batteries to serve as a backup power source for the clock only. (Batteries not included) “A ” “A ” 11 OPEN
Inhaltszusammenfassung zur Seite Nr. 12
Location of Controls: Front View 10 1 11 1 1 4 14 5 15 6 VOLUME TIMER TUNE/CLK MEM/CLOCKADJ. BAND EQ CH RADIO MEM DISPLAY RADIO TV TV TV SCAN MODE MHz FM CH 16 7 8 17 18 1
Inhaltszusammenfassung zur Seite Nr. 13
Location of Controls: Side & Back Views 1 6 11 L L L AU AUDIO IN AUDIO IN DIO IN R R R VIDEO IN VIDEO IN VIDEO IN 0 1 1 1 4 14 7 15 TV ANT DC 12V VIDEO IN AUDIO IN AC~ FM ANT R L 16 8 5 17 18 1 OPEN
Inhaltszusammenfassung zur Seite Nr. 14
Control Definitions: Front, Side, & Back Views 1 Standby Button Press the Standby Button to turn the unit on and off. 2 LCD Display The LCD displays clock and radio information. 3 LCD TV Screen The LCD TV Screen displays a TV signal as well as TV information. 4 Memory/Clock Adjust Button Press the Memory Button to save a radio station to the unit’s memory. See “Saving Radio Stations to the Memory” on page 8. Press the Clock Adjust Button to set the unit’s clock. See “Setting the Clock
Inhaltszusammenfassung zur Seite Nr. 15
Control Definitions: Front, Side, & Back Views 21 Video Input (Side) Use the Video Input to play video, from a DVD player, set-top box, or Mp player, on the unit. 22 Audio Inputs (Back) Use the Audio Inputs to play audio, from a DVD player, set-top box, or Mp player, on the unit. 23 Video Input (Back) Use the Video Input to play video, from a DVD player, set-top box, or Mp player, on the unit. 24 DC Power Input The DC Power Input provides power to the unit when plugged in. 25 Attached
Inhaltszusammenfassung zur Seite Nr. 16
Location of Controls: Remote STANDBY FUNCTION AIR/CATV TV MODE 0 40 41 AUDIO 4 EPG 1 4 INFO 44 TIMER 45 46 TV MENU 47 ENTER 4 48 VOL. 4 TFT TV SCAN SETUP 5 TUNE/CLK ON/OFF MEM/CLK 50 DN UP TFT SET 6 51 7 MEM+ BAND DISP WIDE 8 5 5 16
Inhaltszusammenfassung zur Seite Nr. 17
Control Definitions: Remote 29 Function Button Press the Function Button to switch between AV Input Mode, Radio Mode, and TV Mode. 30 Standby Button Press the Standby Button to turn the unit off and on. 31 Number Keypad & Plus 10 Button Use the Number Keypad in TV Mode to select specific channels. Use the Plus 10 Button when entering a number that is greater than 10. 32 Mute Button Press the Mute Button to mute the unit’s volume. 33 EQ Button Press the EQ Button to switch between the
Inhaltszusammenfassung zur Seite Nr. 18
TV Setup Menu To access the TV Setup Menu, press the TV Menu Button. MENU Language English... Screen Format Auto... Time Closed Caption Source AIR ... Transparent Off ... Default 18
Inhaltszusammenfassung zur Seite Nr. 19
TV Setup Menu Language Press the Enter Button to choose between English, Spanish, and French languages for the TV Setup Menu. Screen Format Press the Enter Button to choose between Auto and 16:9 orientation. Auto The Auto setting will automatically size the incoming TV signal to fit on the LCD TV Screen. 16:9 The 16: setting shows the incoming TV signal in a wide screen view. Time Press the Enter Button to select a Time Zone for the clock. Closed Caption Press the Enter Button to
Inhaltszusammenfassung zur Seite Nr. 20
Service Information Address 116 Carr Street, St. Louis MO, 6106 Phone 1-14-61-881 Fax 1-14-588-1805 Email prodinfo@gpx.com Website www.gpx.com To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol, visit the Support section at francés visite la sección de la ayu- ou le Français visitez la section de www.gpx.com. da en www.gpx.com. soutien à
