Inhaltszusammenfassung zur Seite Nr. 1
®
DLP HIGH-DEFINITION TELEVISION
MODELS
C Series
WD-73C8
735 Series
WD-60735, WD-65735, WD-73735
736 Series
WD-65736, WD-73736
835 Series
WD-65835, WD-73835
OWNER’S GUIDE
• For questions:
- Visit our website at www.mitsubishi-tv.com.
- E-mail us at MDEAservice@mdea.com.
- Call Consumer Relations at 800-332-2119.
• For information on System Reset, please see the back cover.
• To order replacement or additional remote controls, lamp cartridges, or Owner’s Guides,
visit our website at www.mits
Inhaltszusammenfassung zur Seite Nr. 2
ChannelView Channel Listings .............. 28 Contents FCC Declaration of Conformity For Your Records NetCommand for HDMI Devices ............ 28 Record the model number, serial number, and Status Display ......................... 29 Product: Projection Television Receiver Important Information About Your TV purchase date of your TV. The model and serial Fav (Favorite Channels) ................... 30 Models: WD-73C8 numbers are on the back of the TV. Refer to this Installation Notes, Operat
Inhaltszusammenfassung zur Seite Nr. 3
4 5 Important Information About Your TV Important Safety Instructions Please read the following safeguards for your TV and 10) Protect the power cord from being walked on Installation Notes Cleaning Recommendations retain for future reference. Always follow all warnings or pinched particularly at plugs, convenience Stand Requirement Normally, light dusting with a dry, non-scratching duster and instructions marked on the television. receptacles, and the point where they exit from the CAU
Inhaltszusammenfassung zur Seite Nr. 4
1. Television Overview 7 6 Television Overview NetCommand with IR Learning Front Inputs Available on 736 and 835 series models. Your INPUT 4 is a readily accessible set of input jacks for a Mitsubishi HDTV offers a new level of networking that camcorder, game, or other audio/video device. seamlessly integrates selected older A/V products • To view NTSC/480i composite video signals, plug ® 1 with new and future digital products. NetCommand the single composite video cable (usually yell
Inhaltszusammenfassung zur Seite Nr. 5
8 1. Television Overview 1. Television Overview 9 Front-Panel Indicators TV Back Panel Off Steady On Slow Blinking Fast Blinking 11 POWER/TIMER Indicator LED Color TV Condition Additional Information Normal operation. TV is powered off. None 3D GLASSES Normal operation. TV is powered on. Green EMITTER Normal operation. TV can be turned on at any time. TV powered off, auto-on timer is set. Green • TV just plugged into AC outlet. Wait approximately two minutes for blinking to stop be
Inhaltszusammenfassung zur Seite Nr. 6
10 1. Television Overview 11 TV Back Panel, continued TV Set-Up 6. S-VIDEO (INPUT 3) HDMI Cable Categories Connect an S-Video device to this input. Use the HDMI cables are available as Category 1 and Cat- AUDIO R and L jacks for INPUT 3 (item 9) if you wish to egory 2 types. send audio to the TV. 2 • Category 2 Cables (also called high-speed HDMI cables). Newer, HDMI 1.3-compliant DVD 7. HDMI™ Inputs (High-Definition players, video games, and set-top boxes require Multimedia Interfac
Inhaltszusammenfassung zur Seite Nr. 7
12 2. TV Setup 2. TV Setup 13 - To lock the control-panel buttons, use the nels from memory, naming channels, and saving When You First Power On the TV Initial TV Setup, continued Lock > Control Panel menu, page 50. favorite channels in custom memory banks. - To restrict TV use by channel, see Setup > See chapter 5, “TV Menu Settings,” to: Choosing a Language for Menus Edit > Lock, page 43. • S e t t h e T V c l o c k ( p a g e 4 4 ) • Video Settings. Change video adjustments to 1. Power
Inhaltszusammenfassung zur Seite Nr. 8
14 2. TV Setup 2. TV Setup 15 - 736 and 835 Series Models: Perform Setting Up TV Inputs, continued About Home-Theater Control Systems NetCommand IR “learning” to add functions. This summary outlines the control methods available using the TV’s remote control. You may wish to use one or 3. Press EXIT to close the Auto Input Sensing screen. The Setup Procedure more of these methods for your home theater. TV will then display the Auto Input Sensing screen for 1. Connect your devices to the
Inhaltszusammenfassung zur Seite Nr. 9
DVI/PC INPUT L R AUDIO 16 2. TV Setup 2. TV Setup 17 Using the TV with a Personal Computer Using the TV with a Personal Computer 3D GLASSES EMITTER Connecting a Computer to the TV Computer Video Adjustments DVI/PC INPUT Tip: R AUDIO L Use one of the connection methods listed below based 1. Power on the computer if it is not already on. Set the computer’s screen saver to display a pattern on your computer’s video output. after several minutes of inactivity. This acts as a ANT 2 AVR 2. Sele
Inhaltszusammenfassung zur Seite Nr. 10
3. TV Connections 19 18 TV Connections HDMI Device (Cable Box, Satellite DVI Video Device (Cable Box, Satellite Receiver, DVD Player, or Other Device) Receiver, DVD Player, or Other Device) Required: HDMI-to-HDMI cable. Connect DVI devices (digital only) to the TV’s HDMI input jacks. 3 Connect an HDMI cable from the TV back panel to the HDMI device output. HDMI devices provide video and Analog stereo audio cables and a DVI-to-HDMI cable or audio through the single cable. DVI/HDMI adapter
Inhaltszusammenfassung zur Seite Nr. 11
20 3. TV Connections 3. TV Connections 21 Wall Outlet Cable (no cable box) Standard Cable Box, Satellite Receiver, VCR to an Antenna or Antennas with Separate UHF and VHF Leads or Other Device with S-Video Wall Outlet Cable It is very important to connect the incoming cable for your primary viewing source to ANT 1. Required: UHF/VHF combiner Required: S-Video cable and left/right analog stereo Required: Two-way RF splitter, two coaxial cables, right 1. Connect the primary incoming coaxial
Inhaltszusammenfassung zur Seite Nr. 12
22 3. TV Connections 3. TV Connections 23 6. Connect either an S-Video or composite video Note: VCR to a Cable Box (Audio & Video) A/V Receiver (Sound System) Using cable from VIDEO OUT on the VCR back panel • On rare occasions, an HDMI signal may be Required: Two-way RF splitter, three coaxial cables, the TV’s Audio Output to a VIDEO composite or S-VIDEO jack on the TV copy-restricted and cannot be output from right and left audio cables, S-Video or composite video back panel. Connect
Inhaltszusammenfassung zur Seite Nr. 13
24 3. TV Connections 25 Camcorder TV Operation and Features Inputs on the front of the TV (INPUT 4) offer the most B: Composite Video Connection convenient way to connect a camcorder, although you Required: Composite video and analog stereo audio can use jacks located on the back panel instead. Three 4 cables supplied with the camcorder. different connection options are described on this 1. Connect the composite video cable from VIDEO page. OUT on the camcorder to VIDEO/Y on the front o
Inhaltszusammenfassung zur Seite Nr. 14
26 4. TV Operation and Features 4. TV Operation and Features 27 Remote Control Remote Control, continued 1. POWER: Turns TV power on and off. 21. MENU: Displays the main TV menu. When a sub- Note: To operate other audio/video devices using menu is open, backs up one menu level. the TV’s remote control: 2. Slide Switch: Selects the A/V device to be oper- ated by the remote control. Set the slide switch 22. EXIT: Closes TV on-screen menus/displays. • S e e A p p e n di x C , “ P r o g r
Inhaltszusammenfassung zur Seite Nr. 15
28 4. TV Operation and Features 4. TV Operation and Features 29 Status Display ChannelView Channel Listings NetCommand for HDMI Devices Available for all TV models. The TV’s remote may 3 operate some functions of compatible CEC devices 1 2 4 Ant 1 7-1 KABC-HD Monday Night Football without any additional setup. See the your devices’ Press the INFO key to see the owner’s guides for instructions on enabling the devices’ HD 16:9 Standard 6 St. Louis vs. Tampa Bay 5 on-screen status display.
Inhaltszusammenfassung zur Seite Nr. 16
30 4. TV Operation and Features 4. TV Operation and Features 31 Fav (Favorite Channels) TV Signals and Display Formats This is a 16:9 widescreen TV suitable for images avail- Original Use the six Fav channel banks to store groups of your able from HDTV and many DVDs. You can view older- Signal ANT-1 4 TV favorite channels from ANT 1 and ANT 2. You can set style squarish images (4:3 aspect ratio) using one of the 480i Stretch Display Anamorphic DVD up a Fav channel bank for each of your
Inhaltszusammenfassung zur Seite Nr. 17
32 4. TV Operation and Features 4. TV Operation and Features 33 Slide Show USB Photo Menu Compatible Picture Files Viewing Camera Files Use these keys during the slide show: • S t i l l i m a g e s r e c o r d e d o n di g i t a l c a m e r a s u s i n g t h e Exchangeable Image File Format, version 2.1 (EXIF JPEG Photos and the USB Photo Port Keys for JPEG Picture Slide Show 2.1) standard for digital still cameras and Design Begin or resume slide show playback 1. Connect your Rules for
Inhaltszusammenfassung zur Seite Nr. 18
34 4. TV Operation and Features 35 TV Menus 3D Video 3. Power on the TV and the source device. This section provides Instructions for viewing 3D video using the TV’s 3D feature. The 3D options are found in 4. Connect the source device to the TV’s HDMI input. 5 the Setup > 3D menu described on page 46 . 5. When the Auto Input Sensing screen displays, name the input according to the table below. Initial Set-Up The signal type and choice of name are important Main Menu because the TV will proc
Inhaltszusammenfassung zur Seite Nr. 19
36 5. TV Menus 5. TV Menus 37 AV Menu AV Menu, continued An on-screen slider displays when making some audio and video adjustments. Numeric values represented on the slider range from 0 (minimum) to 63 (maximum), with 31 as the mid-point. The AV menu contains sub-menus for audio and video adjustments AV > Global menu AV Menu Options AV Menu Options Video Mute On, Off • On: Displays a solid purple background when there is no video signal from the current input. Global Video See the desc
Inhaltszusammenfassung zur Seite Nr. 20
38 5. TV Menus 5. TV Menus 39 Video Menu Video Menu, continued Mitsubishi recommends you assign names to TV inputs before making video adjustments (use the Inputs > Name menu). Otherwise, adjustments will be reset to the defaults if you SharpEdge On, Off SharpEdge™ adds special edge enhancements to make the image appear name inputs afterwards. (835 series sharper. Saved by input. To make video adjustments: models) • From the Video menu: Deep Field On DeepField™ Imager dynamically enhan
