Inhaltszusammenfassung zur Seite Nr. 1
Introduction
EN
Thank you for purchasing this television set.
This handbook has been designed to help you install and operate your TV Monitor set. FR
We would strongly recommend that you read it thoroughly.
We hope our technology meets entirely with your satisfaction.
NL
DE
Table of Contents
IT
Important safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Packing checklist ...................................................... 3
E
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment • Do not touch the surface with bare hands or greasy cloth Important (some cosmetics are detrimental to the screen). • Unplug the TV monitor before cleaning the screen. • For ventilation, leave at least 4” to 6” free all around the TV monitor. Do not place the TV monitor on a • When the surface becomes dusty, please wipe gently with carpet. absorbent cotton or other soft materials like chamois soaks. • The equipmen
Inhaltszusammenfassung zur Seite Nr. 3
Packing checklist Your TV Monitor package should contain the following accessories, in addition to the accessory box. Please ensure that they are all present. If any of the items is missing, then please contact your retailer. • Remote control (x1) / AAA batteries (x2) • PC Audio Cable • • Quick Start Guide Power cord (x1)* • User Manual • VGA Cable * The power cord supplied varies according to your region. Your TV Monitor overview 1 2 3 4 5 Side of set 1 Power On/Off To switch TV monitor ON
Inhaltszusammenfassung zur Seite Nr. 4
Rear of set 1 AC IN 2 HDMI 3 D-SUB 4 SPDIF-out + PC Audio-in 5 AV-Audio L/R + CVBS + S-Video* 6 SCART 7 Analog tuner 8 Headphone jack 7 8 1 2 3 4 5 6 * For AV: Composite and S-Video input use the same audio ports. 4
Inhaltszusammenfassung zur Seite Nr. 5
Remote Control Keys 3 SLEEP General keys Press to set a time period after which the TV Monitor will switch itself to standby (15, 30, 45, 60, 90 or 120 minutes). 4 Input buttons (TV/AV/SCART/PC)* Press to select correct input mode. 5 Number keys. 6 RECALL Press to return to the previous channel. 7 ENTER Press to confirm channel number selection. 8 MPX Press to select the sound input, displayed in the top right- hand corner (mono, stereo, bilingual). 9 MUTE Press to toggle audio on and off. 10 V
Inhaltszusammenfassung zur Seite Nr. 6
Basic connections Connecting the power cord 1 Connect the AC cord into the AC input on the back of the set. 2 Connect the plug to the wall outlet as shown. Setting up the remote control 1 Open the cover on the back of the remote unit. Insert two AAA batteries (supplied) to match the 2 polarity indicated inside the battery compartment. Enjoying analog TV Monitor Analog Connecting an antenna/cable Connect the antenna cable to the appropriate antenna terminal on the back of the TV Monitor set as
Inhaltszusammenfassung zur Seite Nr. 7
Connecting external audio/video devices Connecting a DVD, VCR, STB or audio/video equipment Connect your DVD player, VCR or audio/video equipment using the SCART port located at the rear of your TV Monitor as shown below. Source-IN R W Y S-VIDEO SPDIF-OUT PC AUDIO-IN SCART AV HDMI Y W R Y Yellow R Red W White or or VCR STB DVD * Philips recommends the following priority for connection types: HDMI ->SCART -> AV TV-OUT SCART Recorder AV *SCART-out only works with analog broadcasts. 7 AUDIO COMPO
Inhaltszusammenfassung zur Seite Nr. 8
Connecting a camera, camcorder, video game or headphones Connect your camera, camcorder, video game console or headphones to the video/audio ports on the rear of the TV Monitor set as shown below. w Y R w Y R Connecting a PC or notebook computer To display PC output on your TV Monitor, connect your PC or notebook computer to the TV Monitor as shown below. SPDIF-OUT PC AUDIO-IN D-Sub D-Sub * For VGA input, Philips recommends setting your PC’s external monitor resolution to 1440 x 900 pixels
Inhaltszusammenfassung zur Seite Nr. 9
OSD navigation Many of the advanced settings and adjustments are available through using the OSD (onscreen display) menus, as shown in the example screenshot below. Basic operations required to navigate these menus (Picture, Audio, Channel management and Settings) are described in this section. Navigating the OSD with the remote control Picture Brightness 50 Contrast 60 Colour 30 Sharpness 80 Backlight 70 Colour Temp Warm Noise Reduction Low Move Enter Back There are four main OSD menus. The
Inhaltszusammenfassung zur Seite Nr. 10
Adjusting the audio settings 1 Press the MENU key to bring up the OSD. Audio Treble 50 2 Using the directional keys, select Audio from the on screen display. Bass 60 Balance 30 Then navigate to the feature you wish to adjust. Sound Effect Off AVL Off 3 Use the left or right keys to adjust the sliding scales.Press OK to save. 4 The Audio menu can also be used to adjust the treble, bass, Move Enter Back balance, sound effect and AVL Adjusting the channel management 1 Press the MENU key to brin
Inhaltszusammenfassung zur Seite Nr. 11
To enable this feature: Setting a personal PIN Settings Menu Language English Sleep Off Set PIN Wide Mode Full Press the MENU key on the remote 1 Factory Default control to bring up the OSD. Move Enter Back Use the directional keys to navigate to the Settings menu. Then select . 2 (see note) Set PIN 3 Enter a four-digit password. Type it again and press OK to reconfirm. 4 Press MENU to exit. * The default PIN for this TV Monitor is "0000." First enter "0000" when you want to change the PIN.
Inhaltszusammenfassung zur Seite Nr. 12
Reorder for channels The first time you completed the setup wizard, all available channels were listed. If you need to reorder for new channels, please follow the steps below: Reordering for channels 1 Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate and select Channel Management. Channel Management Highlight Reorder. Then, select Country Germany Skip Off the channel you wish to reorder RReeoorrddeerr Name and press OK to confirm. Move 3
Inhaltszusammenfassung zur Seite Nr. 13
Re-scan for channels The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please follow the steps below: Scanning for channels 1 Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate and select Channel Management. Channel Manaaaement Country Germany Skip Off Reorder Name 639 .22Mhz Frequency Auto Scan Auto Scan Manual Scan Highlight Auto Scan. Then, select Lock This Channel Star
Inhaltszusammenfassung zur Seite Nr. 14
Widescreen display mode Your Philips TV Monitor has a special widescreen mode that allows you to toggle between 4:3, 16:10, Full, Panorama, and Letterbox 1 and 2 type views. Press the WIDE key on the remote control to toggle the display between the four wide modes. Wide mode The Philips TV Monitor contains four widescreen modes, including 4:3, 16:10, Full, Panorama, and Letterbox 1 and 2. 4:3 For 4:3 standard pictures. A side bar appears on each side. 16:10 For 16:10 standard pictures. A side
Inhaltszusammenfassung zur Seite Nr. 15
Philips Pixel Defect Policy Philips' Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable n
Inhaltszusammenfassung zur Seite Nr. 16
Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. These are the types of black dot defects: One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pi
Inhaltszusammenfassung zur Seite Nr. 17
Tips Poor reception The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your picture: see Finetune (p.9) or modify the orientation of the outside aerial. If you are using an indoor aerial, reception may be dif ficult in certain conditions. You can improve reception by rotating the aerial. If the reception remains poor, you will need to use an external aerial No picture Have you connected the aerial socke
Inhaltszusammenfassung zur Seite Nr. 18
PC Input Signal Reference Chart Resolution Horizontal Frequency Vertical Frequency Standard Format (kHz) (Hz) 1 640 x 350 31.5 70 VGA 2 720 x 400 31.47 70 VGA 3 640 x 480 31.47 60 VGA 4 640 x 480 35 66.7 MAC 5 640 x 480 37.861 72 VESA 6 640 x 480 37.5 75 VESA 7 640 x 480 43.3 85 VESA 8 800 x 600 35.156 56 VESA 9 800 x 600 37.879 60 VESA 10 800 x 600 48.077 72 VESA 11 800 x 600 46.875 75 VESA 12 800 x 600 53.674 85 VESA 13 832 x 624 49.72 74.5 MAC 14 1024 x 768 48.36 60 VESA 15 1024 x 768 56.48 7
Inhaltszusammenfassung zur Seite Nr. 19
Product specifications Model 190TW8 Panel spec Resolution (pixels) 1440 x 900 Brightness (typical) 300 cd/m2 Contrast Ratio (tpe.) 1000:1 Display colour 16.7 M o o Viewing angle (tpe.) H: 170 ; V:160 Response (tpe.) 5 ms Power supply Input 90 V ~ 264 V - AC. (47~63 Hz) Max. power consumption <58 W Power saving <1 W Mechanical Dimensions (W x H x D mm) 490.4 x 412.5 x 138.9 Weight (Kg) 4.6 Weight (lbs) 10.1 Gross weight (Kg) 6.8 Gross weight (lbs) 15 Wall Mounting 100mm x 100mm Analog
